matra 旋盤 中古 販売のため

x-travel: 2050 mm y-travel: 1100 mm z-travel: 800 mm Control: FANUC 18iM Super CAP II total power requirement: 22/26 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 6,25 x3,3 x 3,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. turning diameter 500 mm max. turning length 1400 mm 12-station turret not driven

grinding length: 600 mm grinding width: 300 mm workpiece height: 350 mm total power requirement: ? kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,522 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bezel, setting stick, lynette -for: Crankshaft grinding machine -Technical drawing: see photos Quantity: 1 piece available -Dimensions: 380/85/H200 mm -Weight: 13.4 kg

Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible.

grinding length: 600 mm grinding width: 205 mm x-travel: 600 mm : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

magnetic clamping plate: 1400 - 700 mm weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 300 mm magnetic clamping plate: 600x250 mm wheel diameter: 220-300 mm weight: 2200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are selling our die-sinking EDM system here because of a new acquisition. This is a machine that was sold by the company MATRA at that time. This is a DECKEL DE35C. In the meantime, the company Exeron has taken over the service. The travel is: X=600mm Y=400mm Z=400mm The die-sinking EDM system has a 4-fold electrode changer The control system on the machine was recently overhauled, the power supply and the UPS were renewed. The machine was also otherwise continuously checked and maintained by the Exeron company in the event of malfunctions. Machine is running and is still on the power for a possible test. Operating hours are: 33196 hours. Various tool holders can be part of the price negotiation.

Table clamping surface: 600 x 300 mm Coordinate travel: X 350 Y 250 mm W-axis adjustment range (motor): 200 mm servo-controlled EDM axis Z: 340 mm Holes with electrodes from Ø 0.2 to 4 mm Max. workpiece weight: 300 kg Connected load: 3.5 kVA Machine weight: 700 kg

Swing diameter over bed/cross slide/offset: 630mm/340mm/700mm, center height: 290mm, distance between centers: 1500mm, speed: 1120rpm, machine dimensions X/Y/Z: approx. 3600mm/1500mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible.

turning diameter over bed: 500 mm turning diameter over slide rest: 310 mm turning length: 3000 mm turning diameter in the gap: 750 mm centre height: 250 mm turning speeds: 20-1000 U/min no. of turning speeds: 18 spindle bore: 56 mm longitudinal feed: 0,045-1,09 mm/U face feed: 0,025-0,625 mm/U number of feeds: 55 total power requirement: 4 kW weight of the machine ca.: 2,37 t dimensions of the machine ca.: 4,9 x 1,1 x 1,3 m Machine still in the delivery factory: Electric 380 Volt: chuck: Forkard 315 mm Tool holder system Multifix: Typ C Taper turning device: Chip protect bonnet: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 400 / 500 / 600 mm grinding width: 200 / 300 mm workpiece height: 300 / 350 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: FANUC Travel distance: X= 500, Y= 350 Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

Key data: 1 t, 110 mm

Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or hand release, without UVV Fully functional, can be visited under power

Key data: 440 mm, 280 mm, 315 mm

CNC Machining Center MATRA KIRA KN40VS – FANUC 21-M Specifications (KN40VS) Machine Type: 2-Pallet Machining Center Control: FANUC 21-M Travel: X 440 mm / Y 280 mm / Z 315 mm Pallet size: 500 × 300 mm Tool changer: 12-speed Spindle speed: 200–4,500 rpm Drive power spindle: 7.5 kW Equipment / Condition Pallet changer (2-fold) Machine used, inspection/test run possible by arrangement

Grinding length: 600mm, grinding width: 250mm, table dimensions X/Y: 600mm/250mm, max. table speed: 22m/min, table height: 1020mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm. Machine dimensions X/Y/Z: approx. 1800mm/1100mm/1900mm, weight: approx. 1500kg. The machine was sealed about 5 years ago but currently shows a new leakage. Documentation available. An on-site inspection is possible.

grinding length: 600 mm grinding width: 250 mm workpiece height: 500 mm table surface area: 600 x 200 mm dimensions of grinding wheel: 220 mm table height over floor: 1000 mm : mm grinding spindle speed: 1400 / 2800 U/min total power requirement: 2,0 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,4 x 1,2 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 57.3 -Turning diameter: 400 - 1600 mm -Travel: X 180 mm / Z 60 mm -Drive motor: 1.1 kW -Accessories: incl.transport and assembly frame, individual components see photos -Dimensions: 1930/1280/H1000 mm -Weight: 730 kg

Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 56.4 -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW -Dimensions: 1660/1700/H470 mm -Weight: 224 kg

grinding length:600 mm grinding width:300 mm workpiece height:450 mm total power requirement:8 kW weight of the machine ca.:2,2 t dimensions of the machine ca.:2,8 x 3,0 x 2,0 m grinding spindle speed:1440 / 2905 U/min with magnetic plate 600 x 200 mm autom. vertical feed coolant attachment Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos

Steady Ø 310 mm

Steady Ø 145 mm

Steady Ø 195 mm

Rotary table for lathe chuck PAGUS diameter lathe chuck: max. Ø 200 mm bolt circle lathe chuck: 140 - 180 mm flange: Ø 130 mm table height: 70 mm 360° rotatable base plate: 290 x 220 mm used, tested ! Dimensions: 350 x 300 x 80 mm

Steady Ø 65 mm

Steady Ø 60 mm

Plan - Spiral - Lathe Chuck Diameter 190 mm Centrally adjustable base jaws Individually adjustable top jaws Through-hole 50 mm Bolt circle 176 mm Height 145 mm Weight 14.5 kg

TOS chuck 200 mm

Elma Troyan motor Type: T 100LA 8/4 CB B14F 130-481 380 volt 0,7/1,1 kW 700/1415 rpm

Leroy Somer motor Type: LS80 230/380 volt 1,5 kW 2840 rpm

220/380 volt 2865 rpm 2,2 kW

Freetech motor 0,8/1,1 kW 400 volt 1400/2800 rpm

Type: MI 70 FP F3 30/1 ratio

Carpanelli motor 230/400 volt - 0,25 kW - 1340 rpm 266/460 volt - 0,3 kW - 1600 rpm

AEG motor Type: AM100LS8/4 400V 0,7/1,3 kW 700/1380 rpm

Elprom motor Type: 112M4 B14F165 4 kW 230/400 volt 1420 rpm 30 kg

Efacec universal motors Type: BF5 132M 848 200/230/220/240 volt 2,2/3,3 kW

Type: SW/075T

Aja motor Type: 80/80/4 230 volt 0,8/1,2 kW 1400/2800 rpm

Aja motor Type: 80/80/4 230 volt 0,75/1,17 kW 1400/2800 rpm

Eldrive motor Type: EF 63B 4 1360 rpm

Jinshin motor Type: AEVF - frame: 112M 415 volt 3,7 kW 1430 rpm 40 kg

AEG motor Type: AM80ZCA4/2 230V 0,8/1,2 kW 1425/2800 rpm

Jinshin motor Type: 112M 3,7 kW 220/380V 1430/1720 rpm 45 kg

Leroy Somer Type: LS9013 2,2 kW 220/380V motor 1390/1740 rpm

Elco Cozzi motor Type: CN400 2,2 kW 220/380 volt 1400 rpm

Type: T 132H 4B 220/380V 7,5 kW 1445 rpm

Ansaldo motor Type: A1C 131 1A A000 7,5 kW 2900 rpm 220/380V

Type: C132MB 7,5 kW 380V - 16 amp

Type: T 132 M4 7,5 kW 1460 rpm For Labor 255 lathe

Type: DH 132S 8/4 2,2/3,3 kW 720/1440 rpm For Pinacho lathe SP 90 / 165

Type: AEEEF-PP008 5,5 kW 50 hz - 380V - 12,3 amp 1450 rpm 59 kg

Chucks 4 claw dia:1000 mm

Lathes accessories, measuring equipment etc., contents of this cabinet page