lombardini 発電 機 中古 販売のため

MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany info@miw-zeven

General of overhault engine immediately available from stock Contact= MIW GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0)4281-950583 Fax : 0049(0)4281-950585 info@miw-zeven.de abc.miw-zeven.de

General overhault Exchange engine DEUTZ/Lombardini F4M1008F/LDW1404 without starter, alternator, incl. Fuel-injection-system MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 info@miw-zeven.de MIW-Zeven

Exchange engine overhauled without starters, alternators, incl.fuel injection-system Lombardini LDW1404/Deutz F4M1008F MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring8 D-27404 Zeven Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 miw-zeven.de info@miw-Zeven.de

Engine Brand: LOMBARDINI, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 13 Kw, Rated Speed: 3000 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 16 , Generator Hz: 50 , Generator Volts: 230/400 , Generator Amps: 40.2/23 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/lombardini-ldw1204b2-generator -16-kva-used/63, , = More information =, , Empty weight: 835 kg, Type number: LDW1204/B2 Generator 16 KVA

Engine Brand: LOMBARDINI, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 14.4 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 20 , Generator Hz: 5060 , Generator Volts: 230/400 , Generator Amps: 50.2/20.9 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/lombardini-ldw-2004-generator- 20-kva-used/233, , = More information =, , Empty weight: 1.075 kg, Type number: LDW 2004 Generator 20 KVA

Engine Brand: LOMBARDINI, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 12.8 Kw, Rated Speed: 3000 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 31.5 , Generator Hz: 50 , Generator Volts: 230/400 , Generator Amps: 79/45.5 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/lombardini-ldw-1204-generator- 31-5-kva-used/62, , = More information =, , Empty weight: 860 kg, Type number: LDW 1204 Generator 31.5 KVA

Lombardini 9LD625 / 2, 2 cyl. air-cooled diesel engine, displacement 1250 cm, approximately 19.1 kw / 26 PS 3,000 1/min. More diesel engines: 1-6 cylinder, various products: Deutz, Daedong, Hatz, Hinomoto, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5-100 kw, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.

Lombardini generator set 15 kVA in trailer - - - - - Engine: - Lombardini (Italy) - 2 cylinders - Diesel - Air-cooled - - - - - Generator: - 15 kVA - 230 / 400 volts - 50 Hertz - - - - - Start Unit: - Ignition lock for starting - Volt display - Warning light for oil level and battery voltage - Operating hour meter: only 1,090 operating hours - - - - - Sockets: - 1x 400V - 2x 230V CEE - incl. safeguards - - - - - Trailer: - The generator is installed on a trailer - Car trailer hitch - Training wheel - No papers for the trailer - - - - - Condition: - The generator set was only used for occasional purposes - It has only run for 1,090 operating hours - A test run with load acceptance was done - The engine starts and runs well - The generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - Lombardini generator s ...

Year of construction 2009 like new condition, has worked only sporadically 1 year, Looks machine like new inside The machine is CNC controlled, for the mechanical structuring of thin-film solar cells. The processing heads move over that with a layer of molybdenum metal or other sputtered Glass, with a format 125 x 65 cm, and create an insulating track by material removal. The CNC control controls the movement of the X-, Y-, Z-, A-, and U-axis. all documents, Control Panel, and control are available Original price: 847.000,00 € The complete unit to build a 75MW of production are available. (1 x laser, 2 x mechanical structuring and setting device for needles) Geamt-new value 2.1 mill euro net

Nadelstrukturierer Votan G08 Jenoptik mechanical Ritzer 2012 the Votan again for 160.000,00 euros on the new glass substrates and latest requirements was converted and was no longer in use. Complete unit incl 2 x belt transport table, suction, control Built in 2005 Shipping: 400,00 € (weight ca. 4500 kg)