kallfass ピローパックマシン 中古 販売のため

for cellophanizing of chocolate boxes top condition Siemens PLC with 2 adjustable folding fittings 2 machines available, price is per piece

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

Shrink Tunnel Kallfass Standard 450 N; State as is; checked only for function; Inlet width 400mm; Pass-through height 200mm; Cooling fan. Shrink tunnel Kallfass Standard 450 N; condition as is; only chekced on function; width 400mm; hight 200mm; cooling unit.

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Make Kallfass Model Universa 400 NT Year 2000 Working width 400 mm x unlimted Min. Product length 100 mm Product length Unlimted Passage height 200 mm Capacity up to 60 cycles per minute

Kallfass Universa 400 with shrink tunnel and gripper section Kallfass Universa 400 NT built in 2003 The system is immediately available. The price of the complete system includes the Universa 400. The machine is technically overhauled and is in very good condition. Technical data: - Length of transverse welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Automatic length compensation to reduce the punch gap - Welding stamp monitoring - Side welding monitoring - Foil retaining plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable sealing strip - Side weld wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Kallfass Standard shrink tunnel - Gripper section with inline belt - Curved band can be optional ...

Packaging machine Kallfass Universa 5050; good condition; cleaned and tested; Frame size 500x500mm; Passage height 100mm; with Tunnel Compact 650 S; Passage width 650mm; Passage height max.400mm; Cooling fans L-sealer Kallfass Universa 5050; good condition; cleaned and checked; frame size 500x500mm; product hight max.100mm; with tunnel Compact 650 S; working width 650mm; working hight max.400mm; cooling unit.

Conveyor belt Kallfass 1850x400mm; cleaned and tested; suitable for connection to Kallfass packaging machines; height-adjustable. Delivery belt Kallfass 1850x400mm; cleaned and checked; used for Kallfass packaging machines; adjustable in hight.

Kallfass banding machine with shrink tunnel particularly suitable for long parts (wood, parquet, etc.) Trays or newspapers in a stack. Built in 1999 Punch width 950mm Max. film width 820mm Film (flat shrink film): up to 120 μm Film roll outer diameter: max. 400 mm Film roll width: top 650 mm, bottom 620 mm Passage width: 950 mm Passage height, adjustable: 400 mm In-line conveyor belt: length 2000 mm, Goods conveyor belt in the outfeed: length 2000 mm Welding system: in profile form, permanently heated, temperature thermostatically controlled, Specially coated, maintenance-free, completely odourless: Pneumatically operated welding punch with safety brake cylinders: Film tear and separation control: Foil pre-dispensing at the bottom for extremely light products Foil rolls at the top and bottom for laying with motorised drive Welding punch protection to protect the produ ...

Year of manufacture 1997 Foil Packing Machine Angle welding machine Manual installation Shrink tunnel Mobile substructure Price on request. We deliver and install worldwide!

Universa 400 Standard Bj 2004 Compact 450 SO Bj 2005 MGZ 400 Hand Feeder Bj 2004 Immediately available from stock

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/400 Year 1983 - Serial-No. V 6.83.1891 Mobile on mobile frame After sealing - automatic transport into tunnel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 Universal Year 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vollautomatische Einschweißmaschiene mit Einschweißtunnel - Automatic Foil sealing machine Kallfass Universa 400 NT - Universal 450 N Year 2000 - Serial-No. S 04.00.9 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

An old but functional Kallfass shrink-wrapping machine is available. Seal length: 600mm, max. passage height: 260mm, film thickness range: 12µm-80µm, max. belt speed: 12m/min, max. cycle rate: 20/min, sealing frame dimensions X/Y: 800mm/600mm, max. film roll width: 750mm, working height range: 870mm-970mm, tunnel width: 605mm, tunnel height: 400mm, max. film roll diameter: 300mm, max. film roll core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3400mm/1300mm/1450mm, weight: approx. 750kg. The drive motor is taken out but included. An on-site inspection is possible.

Packaging machine Kallfass Universa 400 ECO; cleaned and tested; Welding width 450mm; Passage height 200mm; Max. Film width 600mm; Min. Product length 80mm; Foil perforating unit; Stepless speed control of the belts; permanently heated welding punch; Counter 418,000. Packaging machine Kallfass Universa 400 ECO; cleaned and checked; sealing width 450mm; hight 200mm; max.foil width 600mm; min.product lenght 80mm; foil perforating tool; dajustable in speed of the trnasport belts; permanently heated seal bar; counter 418,000.

Finger conveyor belt Kallfass MGZ 400; cleaned and tested; Length 2000mm; Width 400mm; suitable as a single belt or for connection to Kallfass machines; Inlet sensor. Nipper feeder Kallfass MGZ 400; cleaned and checked; lenght 2000mm; width 400mm; used for stand alone or to connect with Kallfass machines; Infeed Sensor.

ALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil sealing machine 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - Extra 4) Storage device for wrapped packages - Extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos

A Kallfass Pack-Jet 2000 film packaging machine with a Kallfass Universal 450N shrink tunnel is available. Max. film roll width: 760 mm, rated power: 9 kW, operating voltage: 380 V, control voltage: 24 V, main fuse: 3x 20 A, rated current: 18 A. With Kallfass Universal 450N shrink tunnel, rated power: 16.5 +1 kW. System length: approx. 9000 mm, width: 1400 mm. The transformer for the sealing stamp is defective. On-site inspection is possible.