illig 熱成形機 中古 販売のため

A universal Illig double-stroke thermoforming machine is available. Form dimensions X/Y: 960mm/560mm, max. drawing depth: 280mm, max. panel dimensions X/Y: 960mm/560mm, motor power: 1.5kW, heating power: 16.3kW, heating zones: top and bottom. On-site inspection is possible.

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder

Illig SK 74-C from a workshop for the disabled Year of construction 2006 Serial No.426-0172 JM80Q2 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600

ILLIG PLS75b Inline Counter/ Stacker, with Hole Punch Station, age 2006, Max. Stacking Area: 750 x 350 mm, Min Height of formed product: 25 mm, Max. height of Formed Product: 150 mm, Min. dia. of product : Ø 40 mm, Max. dia. of Product: Ø 150 mm, Max. length of Product Stack: 730 mm, Output rate of Product Stacks: 1200 Stacks/ hr, Rotating Head to neatly remove Products from the Thermoformer Mold with integrated suction, Inline Hole Punch Station, Inline Counter Stacker Station, Compressed Air: 0.2 L at 6 bar, approximately, Total Drive Rating: 19 kW, Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE), Cross delivery conveyor station for counted cups., All Motors are Indramat Servo Motors, Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls, Siemens S7 PLC Controls, Delivers Counted Cups/ Containers at Right Angles to machine direction, New original ILLIG Gea ...

Three Illig punching machines are available for the precise punching of thermoformed plastic parts from film material. Working width: approx. 900mm, working height: approx. 120mm, roller diameter: approx. 196mm, machine dimensions X/Y/Z: approx. 2500mm/1300mm/1600mm, weight: approx. 750kg. Including two hydraulic punching machines Wolf EHPT 6E and two manual swivel arm punching machines. On-site inspection is possible.

Machine name: Packaging machine used (thermoforming line) Manufacturer: Adolf Illig Type: SB 53C - DIN Year of Make: 1990 Drive motor: 1.24 kW Dimensions: L 1,600 x W 1,135 x H 2,710 mm Curb weight: 500 kg Tech. Documentation: Yes Remark: Heating capacity: 4.5 kW (15 ceramic surface emitters) Vacuum system: Degree of vacuum max. 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Drawing depth positive: 150 mm Drawing depth negative: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (Skin) Film roll core diameter: 70 mm Condition: Used Price: On request

Used ILLIG VHW 72/2 Preheater with 2 x electrically heated rolls. Width 720 mm. 380V 50 Hz 3 ph. Heating Capacity 30 kW. Motor 0.18 kW. Total Amps 48 A. Max. Temp. 130.

An Illig slide blister machine is available. Blister length range: 110mm-500mm, blister width range: 50mm-280mm, max. blister depth: 80mm, fold-over edge. An on-site inspection is possible.

Offered is an ILLIG HSA 30 RD - high-performance continuous sealing machine for blister packaging: blister films: PVC, PET APET/PETG, PS, film thickness: 150µm-600µm, lid materials: heat-sealable cardboard, aluminum composite films, Tyvek, sealing area X/Y max. approx. 500mm/300mm, forming depth max. approx. 100mm, 8-18 cycles/minute. Inspection possible by arrangement.

bag length: ca. 700 mm bag width: ca. 500 mm work impulse: - total power requirement: 10,2 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 2 2 2 m Movie: https://www.youtube.com/watch?v=TGGMb3B2UG0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A small table-top vacuum machine (vacuum chamber machine) Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16m³/h, max. utilization time per day: 5h. Documentation available. On-site inspection is possible.

Height=2.2 m, Overall length= 1.1 m, Overall width= 8.2 m, Net weight= 3000 kg,

Height=2.51 m, Overall length= 1.3 m, Overall width= 3.25 m, Net weight= 1750 kg,

Height=2.2 m, Overall length= 1.15 m, Overall width= 2.05 m, Net weight= 1535 kg,

Height=2.2 m, Overall length= 1.2 m, Overall width= 10.5 m, Net weight= 4000 kg,

Function: The Bosch TFA 241 is a thermoforming machine fills liquid products in previously defined Cup sizes. First, the railway film with H2O2 is sterilized and then heated to a predetermined temperature. This temperature is reached, the slide in the next step will be deep. After the cups got their form, these are filled with product. Then, the upper rail slide with H2O2 is sterilized. Then, the filled Cup with the top track slide are welded and punched out before they are passed on a conveyor belt of the drain. Performance: 13,500 - 31,500 cups per hour Number of runs: 5-track and longitudinal runners current format: Ø 44 mm, height 15 mm maximum Cup size: Ø 44 mm height 29 mm Prefiller: Cleaning: CIP capable Mainfiller: -for liquid products -Manufacturer: Orlita -Dosing type: cold HD -Filling volume: 8-15 cm3 Disinfection: H2O2 Date of printing: Inkjet Dimens ...

Height=1.97 m, Overall length= 1.1 m, Overall width= 7.3 m, Net weight= 2600 kg,

Height=2 m, Overall length= 1.05 m, Overall width= 7.75 m, Net weight= 2500 kg,

Height=1.88 m, Overall length= 0.7 m, Overall width= 3.25 m, Net weight= 850 kg,

Height=2.15 m, Overall length= 1.03 m, Overall width= 7.8 m, Net weight= 2500 kg,

Height=1.8 m, Overall length= 1.05 m, Overall width= 3.44 m, Net weight= 1045 kg,