holzmann 粉砕機 中古 販売のため

4 CUTTER HEADS, MAX. DIMENSIONS OF THE WORK PIECE: 180/120 MM, MIN. DIMENSINS OF FINISHED WORK PIECE: 16/7 MM, SPINDLE SPEED: 6000 RPM, OPERATION HOURS: 30 HOURS ONLY!

Table dimensions: 850 x 300 mm. abrasive belt width: 150 mm. abrasive belt length: 2510 mm. abrasive band speed of 16 m/s. Ver ? laipsn suportas angle is 90. Engine power: 2.1 kW. Stakl ? weight: 148 kg. Made In Austria.

Motor power: 2,25 kW. Output: 3880 m3/h. Diameter of connection hole for aspiration pipe: 3 x 100 mm. Bag capacity: 2 x 300 l. Total height: 2400 mm. Impeller ? riveted stainless steel. Weight: 64 kg.

Motor power: 1,5 kW. Capacity: 2480 m3/h. Diameter of connection hole for aspiration pipe: 100 mm. Bag capacity: 300 l. Total height: 2400 mm. Impeller ? riveted stainless steel. Weight: 51 kg.

Type KAP 255XJL Cutting height 45?-90?: 80 mm Cutting height swing 45?: 40 mm Cutting lenght 90?: 430 mm Cutting lenght tilt 45?: 310 mm Motor power S1 1,8 kW Saw blade speed 4800 rpm HM-saw blade teeth 254x30x3 mm Transport dimensions 850x520x410 mm Weight 20 kg

Type USK 1710 Payload 150 kg Measurements (91-171)x60x(59-82 cm) Table size 60x46 cm Weight 15,5 kg

Dimensions (L/W/H): 1050x830x1100 mm Weight: 133 kg Total power requirement: 2,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 840x540x1980 mm Weight: 158 kg Total power requirement: 2,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2150x480x1330 mm Weight: 220 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1600x330x420 mm Weight: 130 kg Total power requirement: 1,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2150x480x1330 mm Weight: 230 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 45 °, 2600 mm, 500 mm

400 V, 50 Hz, 2.2 Kw, Cutting height 100 mm, Cutting width 500 mm (extension table + 900 mm added, but the customer shortened the round bar from the rip fence), Sliding table 2600 mm, max. saw blade 315mm, Work table 1060x330 mm, Table extension 390x330 mm, Table extension 900x810 mm, Boom table 1050x630 mm, Cut-to-length stop up to 2800 mm, Height and angle adjustment manually, Extraction connection 100 mm, Hold Operating tools, Spare straps

Dimensions (L/W/H): 2150x480x1330 mm Weight: 220 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 570x490x1720 mm Weight: 90 kg Total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 620x560x1720 mm Weight: 110 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5-speed station wagon Holzmann K5-260VF, good condition, standard equipment, 1200 mm cutting length, 3 knives, 450 kgPrices subject to change, errors, printing and typesetting errors excepted

CATALOG NO. 6985 TECHNICAL DATA - max width of the workpiece 300mm - height of the workpiece 200mm - unit: corrugated rubber roller + shoe + metal roller - working table 1230x440mm - belt 300x1900mm in advance: - rubber roller, sliding - aggregate about 7.5 kW - sliding roller, rubber from down: - pulling tape - pneumatic oscillation - 2 types of feed speed - feed motor 0.85 kW - diameter of the exhaust connection 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530 kg – unpainted – used grinder - very good condition Net price: PLN 13900 Net price: 3124EUR Net price calculated according to the exchange rate of 4.45 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Vollmer CHHF 21 H - Machine for single-sided grinding Year of construction: 1989 S/N 907 Make: Vollmer Germany in good working condition The technical data of the CHHF 21H at a glance: Circular saw blades Outer diameter 80 to 700 mm Bore diameter 20 to 105 mm Tooth pitch from 8 mm Hook angle up to 30° Radial clearance angle -7° to +3° Tangential clearance angle up to 5° Connected load approx. 0.52 kW Weight approx. 85 kg Dimensions: 70 x 50 x 80 cm Cisei8tfrg This machine has been specially designed for the repair of lack of carbide teeth. Newly inserted tips are used in the existing teeth. With this tabletop version, VOLLMER offers a a particularly economical, space-saving solution. The CHHF 21 H works according to the wet grinding process. During the grinding process, the grinding unit manually moved over the tooth flanks, with the saw blade Saw blade ...

oscillating belt sanding machine model VOLPATO NTS 150/C for wood edges, panels, furniture, doors, window frames and various second hand machine , like new , used very little working conditions : Excellent , like new CE regulation : Yes 45° tilting work table possibility of sanding curved pieces using the driven roller + small radius supplementary rollers diam.mm.25-30-35-40-45 mechanical oscillation with a dedicated motor via a connecting rod/crank system Technical data : Worktop mm.280 x 1000 Tiltable worktop mm.300 x 950 Sanding belt development mm.150 x 2580 Driven roller diam. mm.75 Additional worktop mm.300 x 300 Abrasive rolls available diam. mm.25-30-35-40-45 main motor power Hp 4 Motor for oscillation Hp 0.5 Oscillating stroke mm.20 Overall dimensions cm.182x105 H=cm. 150 volt. 380/50 Machine weight kg.400

Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg

Grinder for bucket seats with 2 air bellows

Orbital sander Comec LC/15AV Element diameter min/max 10-100mm 4kw main motor 2×0.25kw feed motor Sanding belt dimensions 1220x70mm CE Certified

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1500 Technical data: Power supply: 380-400 V Engine power (hp): 3 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x 16 Grinding Angle (degrees): 0-50 Dimensions (mm): 2310 x 790 x 1810 Max. sanding length (mm): 1500 Weight (kg): 775 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage space LED lighting for a good view of the gr ...

Grinding machine (lower grinder) Heesemann type LSM 8 – U Specifications: • Cutting width (mm): 1300 • Workpiece thickness max. (mm): 3 -140 • Brushing device: brush roller diameter 150 mm • Drive for brushing device (kW): 1.5 • Transport bed: 3.0 kW FU 4.0 kW • Feed speed (m/min.): 5 - 25 • Workpiece conveyor belt suction clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total electricity connection (kW): approx. 73

Grinding machine Kündig type BOTOP-4 1100 RP RP Specifications: • Grinding from above and below: with roller and pneumatic sanding shoe unit • Machining of parts on both sides: in one pass • Above-average working speed, reduced workload, excellent surface finish • Working width (mm): 1100 • Feed: 1.5 kW each over FU • Height adjustment: 0.75 kW each • PLC Omron • Vacuum: 1.5 kW • Enormatic: Automatic measurement of workpiece thickness, automatic adjustment and automatic start of feed and grinding process

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1000 Technical data: Power supply: 380-400 V Engine power (hp): 1.5 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x16 Grinding Angle (degrees): 0-50 Dimensions (mm): 1810 x 700 x 1810 Max. Grinding Length (mm): 1000 Weight (kg): 500 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage ...

Grinding machine Löwer type HBS 400 Technical data: - Grinding width max. (mm): 390 - Grinding height max. (mm): 390 - Sanding shoe from above: 1 - Grinding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Transport carpet: for material feed - Feed speeds (m/min.): 6/11/16 - Connection for suction diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic abrasive belt clamping - Special HBS sanding shoe: for conforming grinding with thickness differences of up to 4 mm or crooked workpieces - Selector switch adaptation grinding / calibration - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness scanning - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant