herbold ミルズ 中古 販売のため

According to the description below

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

With 55 kW Electrical motor and frame

Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Inlet: 450 x 580 mm Rotor width: 600 mm Rotor diameter: 450 mm Rotor blades: 3 Stator knives: 2 Motor: 55 kW

NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Dzk8qe Stator knives: 2 Drive: 7.5 kW Double slope With roller feeder, electric switch box and soundproofing box

Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

Plastic compactor Main drive 132 kW Complete system with recutting mill, fine material separation and recirculation, electrical control

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Inlet: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm

Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4

Twin-shaft shredder Drive 37.50 kW

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding

Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kW Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Output Capacity: 3000 kg/h // Material : PET

HERBOLD granulator type SMS 60/100 Heavy version Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width optionally as an open 3- or 7-blade rotor Drive motor 110 kw Folding device with electric winch

- Brand: Herbold - Model: HV-30 - Year: 2006 - No electrical panel. - Composed of: 1. Feeder silo with bag filters. 2. HU30 agglomerate with 75/90 kW (102/122 hp) motor. 3. MFT 35/450 7.5 kW (10.2 HP) transport vacuum cleaner. 4. Cyclone windbreaker and MFT 30/300 vacuum cleaner with 4 kW (5.4 hp). 5. Reshredding mill. Brand: Herbold, Model: SML 30/50-53-2, Motor: 11 kW (14.8 hp). 6. MFT 18/180 type 1.5 kW (2 HP) transport vacuum cleaner. 7. Fines separation system with 2.2 kW (3 HP) vacuum cleaner with cyclone and return of fines to the main silo.

Year of construction 2006 Rotor width: 600 mm Drive motor: 50 kW Rotor has been overhauled, blades have been replaced with spare knife + spare sieves without control cabinet, the machine was connected to a central control cabinet

HERBOLD PU500 PULVERIZER, used for PVC, PE, PP, Output: 500-600 kg/h depending on materials, Constructed in th 90s but refurbished in 2010, Granulator with 55 kW drive, Siemens control, Blower, Grinding discs: Old and new ones, Electrical connections overhauled in 2010, Bearing housing in need of repair (possible supply of the machine reconditioned), installed power - used power in work: about 60-65% : 55 KW, capacity: 500-600 kg/h, type: PU500

Low-speed pre-shredder for rubber, plastic, cables, composite material Well suited for exposing material composites, e.g. tires, old cables With integrated safety shear coupling to protect against foreign objects Rotor 600 mm diameter x 1450 mm working width Closed rotor with offset segment blades, mounted on cassettes 24 rotor blades, 2 stator knife rows Swivelling strainer basket, perforations of your choice With pressure device (pendulum swingarm) Drive cable 90- 200 kw