guk ポストプレス: フォルダ 中古 販売のため

; operational

Completely obsolete in the sales order GUK folding apparatus FA21/4 Cartonac 81 / 91 4 folding plates. Feed table with side shift for Planoformate Max 215 x 320 mm Min. format 60 x 130 mm unfolded Performance 400 FS / min Optional: Indent center / left / right drive side right / left / investor table: 450-600 mm Round to cover optional Paper weight 50-80gr / m ² (single-layer), 37-50gr / m ² (multi-layer) Power requirement: 2,1KW, 400V 3 pH, 50 HZ Air consumption: 6bar / 15 l/min (for dowry soft or opt. Pneum. Marking device) Continuously adjustable AC drive for folding machine frequency inverter,. Motor protection switch for pressure vacuum pump. Cover with safety contact

Flatpile Feeder, 4 Pockets, 4 Pockets, 2 Pockets, Delivery

Flatpile Feeder, 4 Pockets, Delivery

GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...

6 Pockets, 2 Knives

mobile sword folding unit

Folding unit GUK FA 50-2 2nd station; good condition; cleaned and tested; Inlet width 500mm; 2 folded pockets; Self-control. Folding unit GUK FA 50-2 secound unit; good condition; cleaned and checked; working witdh 500mm; two pockets; Automatic control.

4 buckles

Folding machine GUK SAF 35/2 Year of manufacture 1981 2 cassettes Art,No. PS5983 Price 850€ FCA Germany

Sell a GUK folding machine Cartonac 2000-2 on behalf of a customer More information on request.

Window rebate pocket for GUK FA30 / 50 / 54 / 74 / K50 / K54 / K74 used

on behalf of the customer For enclosing folded brochures from the stacking magazine - Drive via servo motor - Feeding belt 1.00 m - Inventory control -Tape transfer 90° right - max. 400 folds depending on paper quality - Formats: min. 29 x 29 x 2 mm, max. 150 x 78 x 12 mm - Height-adjustable substructure

GREMSER Feeder 1 Knife Digital counter

Plegadora

intermediate table GUK ZT 520; cleaned and tested; Working width 520mm; height-adjustable; Speed adjustable; suitable for connection to GUK folding machines. Intermediate transport table GUK ZT 520; cleaned and checked; working width 520mm; adjustable in hight; adjustable in speed; used for GUK folding machines.

Max. size= 35 x 35 cm, Availability= 072023, Antique folding machine 35 cm with 2 buckle plates - in working condition - exhibit LOT Loaded in truck or container

1996 GUK Falzmaschinen K 52/4 KTL - F4 Manufacturer: GUK Falzmaschinen Country: Made in Germany Type: K 52/4 KTL - F4 Year of Manufacture: 1996 Nominal Voltage: (Not specified, space for voltage in V and frequency in Hz) Nominal Power: (Not specified, space for power in kW and current in A) Find more here - / Contact us at -

Small format delivery / standing sheet delivery GUK Display for small format. It has its own drive motor, so it can be adapted to many folding machines. Art.Nr. L984

Schwertfalzwerk / Mobile Knife Folding Unit GUK ZG 500 Year 1999 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 40m/min - max. 160m/min Produktivität / Productivity 20.000 cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Small format standing sheet delivery GUK KS 310; cleaned and tested; Working width 310mm; Self-propelled. Smal fold vertical stacker GUK KS 310; cleaned and checked; working width 310mm; Automotive.

Max. size= 65 x 35 cm, Availability= 032025, izes-max. 350 x 650 mm sizes-min. 70 x 90 mm smallest fold 15 mm Equipment: continuos suction feeder width: 35 cm folding unit 4 bags complete folding rollers neu 2025 Suction drum feeder for papers up to 30 - 180 g/m² Suction drum new in 2025 counter vertikal sheet delivery GUK stream delivery LOT Loaded in truck or container

Folding machine GUK K 49/4 FN-TH, feeder, 4 pockets, 1 bar, delivery, counter, machine number 36560, year of construction 1996, in good condition, immediately available

GUK Folding Machine Stand Alone FA 21/4 S2 SVA 730 Outdated Nominal voltage 380 V / Mp 50 Hz Nominal consumption 1.54 KW Rated current 4.6 A

1.4-pocket folding station 2. 4-pocket folding station 1 x Cross Break

Antike Falzmaschine - Antique Folding Machine Guk

on behalf of a customer GUK Folding Machine FA 21/4 Cartonac 2000-2 further information on request

Width 50 cm Year of manufacture 1997 Flexible sword folding unit Self-control Mobile substructure Delivery date: short-term Price on request. We supply and install worldwide.

Width 72 cm Year of construction 1992 Pallet feeder with suction head 4 fold pockets in the parallel fold section 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Noise Insulation Hood Downstream knife shaft Shed display Delivery date: immediately from stock Price on request. We supply and install worldwide.

Folding machine GUK FA 36/4 AS, machine number 49664, year of construction 2005, 4 pockets, speed controller, friction feeder, noise insulation cover, counter, delivery, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Flatpile Feeder, 4 Pockets, 1 Knife, Delivery

Flatpile Feeder, 4 Pockets, 1 Knife, Delivery

Standing sheet delivery GUK KS 430; cleaned and tested; Working width 430mm; Preparation for foosball; suitable for connection to GUK folding machines. Smal fold vertical stacker GUK KS 430; cleaned and checked; working width 430mm; control system for kicker; used for GUK folding machines.

max. format 74 x 104 cm Year of construction 2008 Pallet feeder with suction head Counting device L4 Upstream knife shaft 1st station: 8 fold pockets 74 cm Downstream knife shaft Transfer table for small format 2nd station: 6 fold pockets 74 cm Height adjustable Downstream knife shaft Roller diameter 42 mm / min. seam spacing 45 mm Window rebate bag Shed display Delivery date: short-term Price on request. Worldwide delivery & installation.

- Underfloor suction feeder - Infeed width max. 36 cm - GUK MCS-106 preselection counter - 4 parallel folding buckle plates - Belt delivery, Construction year: 2008

folder creaser gluing machine double crease head, 1 head to use for perforation as option 3 folding pockets + gate fold glue system Format 50x100cm up to 480 grams machine very well suited for covers with flaps, heavy stock gate fold brochures etc optional pocket folding possible MHGraphics is Fidia dealer. we can organise installation and instruction by trained mechanic Available: immediately/sofort

Equipment: Longitudinal seam, folding bottom, double edge, 4+6 point gluing, electronic gluing unit HHS X-tend² 8 channel with 6 application heads, Quality Assurance System HHS X-tend², BJ. 2014 with code reader, Bottom Glue Control, Nozzle Glue Control & Linear Ejectors, Belt crusher on the right, disc gluing unit on the left, electronic overhaul with servos, feeders with vacuum, Primary crusher left, kickers, counters, digital position indicators, Pressing device after folding, motorized threading station, Jagenberg DBS 01 Control, Video Surveillance Storage, pneumatic, clocked press belt. Overhaul 2024: cleaned, tested, new conveyor belts, new press belts at the top / bottom Other: The machine can be viewed while it is running by arrangement.

Format range: max. 620 mm, min. 54 mm Equipment: Longitudinal seam, Braille, Feeder with vibrator and blow nozzles, alignment station according to the feeder right / left, print image control with camera for max. 40 cm width, with vacuum conveyor belts and production report, manufactured by IYEC Germany, pre-crushing station right and left, Minimal folding device, Braille module with 4 and 5 sections, max. 2 parallel, max. machine speed 300m/min., Disc underglue unit left, quality assurance system HHS X-tend² with code reader, glue seam control, linear ejector, extended, pneumatic, intermittent press belt, IMPAC semi-automatic Packing aid with turning station and motorized height adjustment. Original price EUR 460.000,--. Other: The machine can be viewed in the production by arrangement.

Format Range: max. 2250 mm min. 340 mm Features: longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS XP-E08 with 6 application heads, Primary crusher left, counter, motorized format setting, Friction feeder with vacuum and cycle control, digital position indicators, motorized transfer station, Folding middle station, UV marker, 3 x cutting alignment on the press belt, extended press belt. Overhaul 2023: cleaned, tested, painted and with new conveyor belts, as well as equipped with new transport baths. Miscellaneous: The machine can be viewed while it is running by arrangement.

Diana Jagenberg 115-3 year:1990 -straightline -lockbottom -4 corner -6 corner -vibrator -kicker -Counter -pre breaker without electronic gluesystem

Format range: Max. sheet size opened: 2300 x 1000 mm Min. sheet size opened: 380 x 160 mm Min. sheet size folded: 185 x 130 mm Equipment: Longitudinal seam, folding bottom, double margin, 4 + 6 point gluing, electronic glue mill HHS XTS-E16 cold glue system, BJ. 2023 with 8 application heads, counters, fully automatic format setting, boxflow control with Touchscreen display, extended pressing station, ACE feeder with vacuum, material: Corrugated board with corrugated A, B, C, E, F, FE, EE, BE, BC, solid board: 800–1500 g/m², Maximum mechanical speed: 250 m/min, Bahmüller Retrofits 2025, including fully automatic SMB COR-Flex bundling machine. The machine is in very good condition and can be used by arrangement in production.

Lamina crash-lock gluer year: 2008 Technical Specification: max. thickness: 4mm for crash lock boxes 6mm for standard boxes Min. thickness: 1mm corrugated flute type: E, B, C For more technical data, please don't hesitate to contact us.

Reference ID PP56956 Category Folder Gluer Manufacturer Bobst Model MEDIA 100 II-A2 Year Built 1999 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Brand: BOBST Model: MEDIA 100 II-A2 Year of Manufacture: 1999 Origin: Switzerland Condition: 100% functional Machine Availability: Can be inspected on site in running condition Working Formats Maximum working width: 1000 mm Minimum working width: 126 mm Minimum board width before gluing: approx. 100 mm Maximum unfolded box length: 600 mm Minimum box length: 60 mm Maximum format: at least 600 mm Note: According to the operator, larger boxes may also be produced on this machine; final confirmation should be checked in the technical documentation. Example: A format of at least 600 mm can be processed, based on 150 mm x ...

agenberg Diana 145-4 Type: Folder Gluer Year Built: 2000 Condition: Good Availability: May 2026 General Machine Configuration Jagenberg Diana 145-4 Large format folder gluer in the 145 cm class Suitable for corrugated box production, especially for large-size and heavy-duty boxes Main Units Identified from the Photos 1. Feeder Section Automatic feeder unit Suitable for large-format corrugated board feeding Adjustable side guides 2. Folding and Transfer Section Extended and wide transfer section Multi-belt transport system Stable sheet transport for large box formats 3. Gluing System Cold glue (PVA) infrastructure available Valkomelt gluing system 3/4-point gluing capability Multiple glue gun connection infrastructure 4. 4-Point Folding Unit Suitable for crash-lock bottom / 4-point carton production Important feature for value-added box styles 5. Pr ...

Folder Gluer Jagenberg Simplex Universal 875 Baujahr/ Year 1982 - Serial-No. 8128 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Material 160 - 600 g/m2, Vollpappe und Wellpappe bis 4mm Format max. 600mm x 875mm / 24" x 34" Format min. 70mmm x 55mm / 2.75" x 2.25" Maschinenabmessung BxL 1500mm x 6800mm / 59" x 268" Länge Pressband 2600mm / 102" Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

- max. open blacnk width 800 mm - straigh line - automatic crash lock bottom - gluing system with discs - machine in production

Format range: max. 1000 mm, min. 56 mm Equipment: Longitudinal seam, folding floor, double edge, 4-point gluing, motorised format adjustment, servo overhaul folding with program memory, Robatec electronic top gluing unit with 4 application heads, disc bottom gluing unit on the left, feeder with vibrator, belt crusher on the right, left up to max. 30 mm, additional central transport, folding floor module A2 with additional upper and lower centre transport, additional central transport in folding station, pneumatic kicker, counter, Bobst CUBE control, camera surveillance, Small box equipment, pneumatic press belt. Overhaul in 2026: cleaned, checked, painted and with new press belts as well as new feeder and transport belts. Other: Machine can be viewed by appointment while running.

Format range: max. 680 mm min. 126 mm Equipment: Longitudinal seam, disc underglue unit left, Vibrator & dental gauge on the feeder, Bobst CUBE control, primary crusher right and left, kicker, counter, fully automatic format setting with program memory, pneumatic, intermittent press belt. Overhauled 2022: cleaned, checked, painted, new jetty and Transport belts.

Faltschachtelklebemaschine / Folder Gluer Bernhardt FKB 700 Baujahr/ Year 2010 - Serial-No. 300310/86/FKB/700 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Grammatur 200 - 600 g/m2, E-Welle Materialien festes Papier ab 200 g/m2, Karton Plastik / Materials: strong paper from 200 g/m2, cardboard plastic Format offener Zuschnitt 500 x 700mm Luftanschluss benötigt / Air required min. 6bar Maschinengeschwindigkeit / Machine Speed max. 400 m/min. Die FKB 700 ist eine multifunktionale Faltklebemaschine für das Falten und Kleben von: Mappen, CD-Hüllen, DigiPacks und Faltschachteln. The FKB 700 is a multifunctional folding and gluing machine for folding and gluing: Folders, CD cases, DigiPacks and folding boxes.

Manufacturer: Petratto Model: SC 10 Year of Manufacture: 2006 Type of Machine : Folder Gluer Find more here - / Contact us at -

Format range: max. 940 mm, min. 50 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-pect, 8 channel with 3 application heads, disc underglue unit left, Pre-crusher right and left, kicker, counter, vibrator on the feeder, digital Position indicators, threading station, lower center feed in folding, pneumatic, intermittent press belt, cleaned, tested.

Format range: Box length: 80-535 mm Box width: 50-400 mm Equipment: motorized right turn / back dust margin, laser counter, speed infinitely adjustable via potentiometer. Packing scheme: 1–4 rows / layers, results in 16 possibilities. Overhaul 2025: cleaned, checked, painted, new belts. Machine can be viewed by appointment while running.

Reference ID: PP-56048 Category: Folder Gluer Manufacturer: Bobst Model: DOMINO 145 II Matic Year Built: 1996 Condition: Good Location: Europe Availability: Immediately Price: 85.000€ LOT Key Features & Equipment • Longitudinal seam configuration • Automatic bottom system (3-point) • 4/6-point gluing capability • Cold glue system by Valco (Year 2019) with 5 nozzles • Hot melt gluing system by hhs-Xmelt (Year 2017) with 3 nozzles • Integrated handle applicator • CoroPack 125 Bobst included (Year 1996) – electronics renewed

Reference ID: PP-56409 Category: Folder Gluer Manufacturer: Jagenberg Model: Diana 165-4 Year Built: 1999 Color: - Impression: - Working Hours: - Speed: - Max. Size: 1650 mm Min. Size: - Condition: Good Location: Europe Availability: Immediately Machine Description: Automatic feeder unit Extended folding and transfer section Press/delivery section Conveyor-type delivery Linear rail-based manual adjustment elements Top control panel / operator panel Safety equipment (protective guards, emergency stop, etc.) Gluing line (glue application infrastructure available)

Bobst Media 100 II A2 year 1999 HHS gluing system 6 guns cold glue 1 gun hot glue Disc Gluing

Format 700 x 385 - 140 x 210 mm Speed : up to 6000 A4 sheets/h Up to 9 creases and 2 folds per document

Format range: Box length: 80-535 mm, Box width: 50-500 mm, Equipment: standard, right/left curve, Packing scheme: 1-5 rows next to each other, 1-5 layers on top of each other, on creasing line 2 or 4 as well as on closure caps, Output more than 200,000 boxes per hour. Cleaned / checked / new wear parts.

Format range: max. 680 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-pect, 4 channel with 2 application heads, disc undergluer on the left, Bobst CUBE control, vibrator, cleaning brushes in the feeder, primary crusher on the right and left, kicker, counter, digital position indicators, folding floor module A2, pneumatic, intermittent press belt. Overhaul in 2026: cleaned, checked, painted, new press belts as well as feeder and transport belts.