engel victory 射出成形機 中古 販売のため

Key data: 800 kN

Engel Victory 500/80 Tech / Production line with the Engel Viper 12 robot Year of Make: 2011 Injection unit: Screw diameter: 45 mm Injection weight: approx. 295 g Spray pressure: 1598 bar Dosing volume: 318 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Hydraulic core pull x 3 Hardened injection unit - Bimetal Robot Angel Viper 12 Year of Make: 2014 5-axis robot: 4 axes are driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Purchase of the robot at an additional cost Dimensions: Weight: 5300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pumps/motor: 15 kW All off ...

Key data: 1100 kN

Engel Victory 500/110 Tech Ecodrive with the Sepro S5.15 robot / Hybrid machine / Operating hours: approx. in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 40 mm Injection weight: approx. 225 g Spray pressure: 2029 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 740x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 6 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Sepro S5.15 robot Year of Make: 2016 5-axis robot: ...

Key data: 1100 kN

Engel Victory 330/110 Tech / Production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of Make: 2004 Injection unit: Screw diameter: 40 mm Injection weight: 190 g Spray pressure: 1670 bar Dosing volume: 201 cc Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Hardened injection unit - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Dimensions: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 27.7 k ...

Key data: 1400 kN

Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 8,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2400 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 140 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition, the machine worked in a so-called clean room Operating hours: approx. 8,000 in automatic mode Total number of operating hours: 12,005 h Euromap 67 Robot interface Air Valve x 6 Hydraulic core pull x 5 Control with hot run ...

Key data: 1400 kN

Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimetal M ...

Key data: 1600 kN

Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2385 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 160 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimeta ...

Key data: 1800 kN

Engel Victory 200H/60W/180 combi / Production line with the Engel Viper 20 robot Year of Make: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Spray pressure: 2392 bar Dosing volume: 61 ccm Clamping unit: Clamping force: 180 t Spar spacing: 0x0 mm Size of the clamping plates: 1020x980 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced Injection Units - Bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter  ...

Key data: 2200 kN

Engel Victory 1050/220 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 55 mm Injection weight: approx. 480 g Spray pressure: 2053 bar Dosing volume: 511 ccm Clamping unit: Clamping force: 220 t Spar spacing: 0x0 mm Size of the clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Operating hours: 38,188 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 4 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 12 Injection unit is wear-resistant and resistant to ...

Key data: 2600 kN

Engel Victory 2460/260 Tech Ecodrive with the Engel Viper 20 robot / Hybrid machine / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2021 Injection unit: Screw diameter: 70 mm Injection weight: approx. 1100 g Spray pressure: 2000 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in perfect technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 10,000 in automatic mode Air Valve x 5 Hydraulic core pull x 2 on the side of the movable clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Injection unit is wear-resistant and resistant to corrosio ...

Key data: 3000 kN

Engel Victory 1050/300 Tech Ecodrive with the Wittmann W832 PRO robot / Hybrid machine / Operating hours: approx. 25,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 60 mm Injection weight: approx. 540 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 300 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 25,000 in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic core pull x 1 Control with hot runners x 18 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional ...

Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes

Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

Key data: 500 , 30

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Key data: 4200 kN

Machine in production !1

Key data: 700 kN, 35 mm

used injection moulding machines ENGEL VICTORY 200-70 Tech Stock No.: 503473 Manufacturer: ENGEL Type: VICTORY 200-70 Tech Control: CC100 Year of Make: 2004 Hours: 77192 h Technical data closing page Clamping force: 700 kN Panel size h x v: 670 x 420 mm Min. installation height: 150 mm Plate spacing max.: 600 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw speed: 400 min Plasticizing current: 21 g/s PS Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total Weight: 5200KG Equipment Screen text German Screentext English  ...

Key data: 750 kN, 40 mm

Engel - Injection Molding Machine e - Max - 310/75 ( No.:1 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 40 – diameter - Actual shot value: 40,069,660 pcs. - Operating hours: 105,347 h – In automatic: 63,211 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm

SPECIAL OFFER for renovation of warehouse space - Screw diameter: 25 mm - Injection rate: 109 cm?/s - Injection pressure: 2.400 / 2.000 bar - Injection volume: 59 cm? - Screw speed: 400 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 250 / 40,6 mm / kN - Ejector stroke / force max.: 100 / 40 mm / kN - Clamping force: 500 kN - Mould opening stroke max: 400 mm - Mould height max: 200 mm - Daylight between platens max: 600 mm - Heating zones: 4 - Platen size (h x v): 500 x 450 mm - Control: CC200 - Oil tank capacity: 135 l - Operating hours: 104.550 - Power: installed max: 5,45 + 7,5 kW - Dimensions (long x wide x high): 4.000 x 1.400 x 2.000 mm - Weight: 4.000 kg

double pump for high speed - Screw diameter: 30 mm - Shot weight max: 104 g - Injection pressure: 2.180 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Nozzle stroke max: 250 mm - Clamping force: 1.200 kN - Mould opening stroke max: 500 mm - Mould height max: n/a mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Heating zones: 2 - Ejector force: 47 kN - Oil tank capacity: 300 l - Power: installed max: 25 kW - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm - Weight: 7.300 kg

SPECIAL OFFER for renovation of warehouse space - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 102.273 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 101.636 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm

Key data: 20000 kN, 135 mm

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

Key data: 1200 mm, 141 , 35

Screw diameter: 35 mm Stroke volume: 154 cm³ Injection weight in polystyrene: 141 g/hp Injection pressure: 2,177 bar Clamping force: 120 t tie-barless Tool installation height min.: 300 mm Opening distance: 500 mm CONTROL: CC200 Screen text: german / german Operating instructions: german / german incl. ERC 23/1-F robot, with integrated storage belt Pump drive power: 15kW Total connected load: 24.2 kW Total weight: 7,300 kg Dimensions L x W x H: 4.4 x 1.5 (+0.8) x 2.0 m m m m Payment terms: 100 % before taking over the machine, net only

Key data: 280 kN, 30 mm

Injection moulding machine ENGEL Victory 200-28 Tech Stock No.: 503562 Manufacturer: ENGEL Type: Victory 200-28 Tech Hours: 31150 Control: CC200 Year of Make: 2011 Technical data closing page Clamping force: 280 kN Panel size h x v: 500 x 450 mm Min. installation height: 150 mm Plate spacing max.: 550 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 450 kg Technical Data Spray Side Screw diameter: 30 mm Displacement: 135 cc Spray pressure: 1065 bar Screw length: 17 l/d Screw stroke: 140 mm Screw speed: 480 min Injection flow to the outside: 78 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.2m x 1.35m x 1.85m Total Weight: 2900KG Equipment Screen text German Levelling elements Technic ...

A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible.

A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500ba ...

Key data: 2500 , 60

ENGEL 250T injection molding machine Reference : ES1800/250HL Clamping force : 250T Year : 1999 Working hours : 73 655 h Screw diameter : 60 mm Injectable volume : 763 cm3 Injection pressure : 1969 bars Platen dimensions : 1150 x 900 mm Mold thickness (min/max) : 350 mm x 850 mm Dimensions : 6,92 m x 2,08 m x 2,14 m + with 1 SEPRO robot

Injection molding machine ENGEL VC330 -110T Reference: VC 330 /110 Clamping force: 110 T Year: 2005 Number of working hours: 32,659 h Screw diameter: 30 mm L/D: 23.6 Maximum injectable volume: 113 cm3 Injection pressure: 2180 bar Overall platen dimensions : 740 x 470 mm Mold thickness: mini: 300 mm Weight: 7300 kg Dimensions: 4.36m x 1.48m x 2.04m + with 1 Sepro Robot and 1 conveyor belt

Key data: 1100 , 40

Machine de moulage par injection ENGEL VC330 -110T Référence : VC 330 /110 Force de fermeture : 110 T Année de fabrication : 2004 Nombre d'heures de travail : 84000 heures Diamètre de la vis : 40 mm Volume injectable maximum : 251 cm3 Epaisseur du moule : mini : 300 mm Poids : 7300 kg Dimensions : 4,36m x 1,48m x 2,04m 4,36 m x 1,48 m x 2,04 m

A two-component injection moulding machine Engel with piggyback configuration, including Engel Viper 40 robot and safety enclosure, is available. Clamping force: 1800kN, nozzle diameter: 35mm, min. mould installation height: 270mm, max. platen distance: 1020mm, tie bar spacing: 980mm, centering: 180mm. Screw diameter 1/2: 22mm/15mm, injection pressure 1/2: 2392bar/2203bar, injection weight 1/2: 66g/19.5g. Robot year of manufacture: 2014, robot travel X/Y/Z: 700mm/1300mm/2360mm. Machine dimensions X/Y: approx. 6700mm/2100mm, control: CC400, operating hours: approx. 38567h. The 22mm screw needs to be replaced. Without conveyor belt. Documentation available. An on-site inspection is possible.

Key data: 2000 kN, 562 g/PS, 55 mm

Specification Injection Moulding Machine Engel VC 1350/200 Tech General data Clamping force: 200 t Year of Make: 2007 Injection unit weight: 562 g Injection Unit .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 cm³ Injection unit weight: 562 g Tool clamping unit 200/... Clamping force: 200 t Dimensions of the tool plates: 860 x 570 mm Output force: 80 kN Tool height: 400 mm Opening travel: 750 mm Maximum panel spacing: 1150 mm Discharge stroke: 180 mm Other Specifications Weight: 14200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Year of Make: 2007 Equipment 2 x hydraulic core on the moving plate Pneumatic valve Integrated robot 8 zones for hot runners Rotameter 8-fold

ENGEL ES 1350/350 HL injection moulding machine was built in 1995 in Austria by ENGEL AUSTRIA GmbH. The machine, which is designed for the economical production of plastic parts, is distinguished by the use of many components with excellent technical parameters. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system, operating at a maximum force of 350 tonnes, guarantees high repeatability and quality of the manufactured parts. Once the production process is complete, the robot automatically transfers the finished products from the workspace to a conveyor belt. The ES 1350/350 HL injection moulding machine weighs 5000 kg. Technical specifications of the ENGEL ES 1350/350 HL injection moulding machine - CNC controller: ENGEL - maximum m ...

Key data: 800 kN, 239 g/PS, 45 mm

The machine is in good condition and has been maintained during operation at short maintenance intervals. The machine is connected and fully functional. A visit with a test is possible. All documents for the machine are available. The screw, heating cylinder tube and RSP were renewed in 2022 by Plasma Kunststofftechnik. Baseline: - No: 21953 - Year of construction: 1991 - Weight: 4000kg. - Clamping force: 800kn - Dimensions: 3910mm x 1380mm x 2050mm (LxWxH) - Control:CC100 Technical details: - Operating voltage: 400V 3~50Hz - Worm: 45mm - Screw geometry: 3-zones - Dosing distance max.: 160mm - Nozzle thread: M28x1.5 - Max. spray pressure: 1300 bar - Injection weight PS: 239g - Horizontal spar spacing: 405mm - Vertical spar spacing: 345mm - Opening travel max.: 430mm - Installation height min: 150mm - Installation height max.: 430mm - Centering: 125mm - Cooling  ...

Presse à injecter ENGEL VC 200/80 Année : 2005 Nombre d’heures : 79 000 h Force de fermeture : 80 T Course d'ouverture : 450 mm Epaisseur moule min : 250 mm Dimensions des plateaux : 670 x 600 mm Diamètre bagues de centrage : 125 mm diamètre de la vis : 35 mm Volume injectable : 154 cm3 COMMANDE : CC200 1 noyau hydraulique interface robot : Euromap 67 DONNÉES GÉNÉRALES : Puissance de chauffage installée : 6,8 kW Puissance d'entraînement de la pompe : 15 kW Puissance totale connectée : moteur + chauffage Poids total : 5.200 kg Dimensions totales L x l x H : 4,0 x 1,4 x 2,0 m

Key data: 5500 , 80

Presse à injecter ENGEL 550 T Type ES1800 Année : 1998 E parfait état de fonctionnement

Key data: 3000 , 702 , 60

Presse à injecter ENGEL 300 T Type : VICTORY 1800 / 300 POWER Année de fabrication : 2008 En bon état de fonctionnement Force de fermeture : 3000 KN / 300 T Diamètre vis : 60 mm Volume injectable : 763 cm3 Poids de l’injection en PS : 702 gr Pression d’injection : 1960 bars Vitesse d’injection : 284 cm3/s Course ouverture moule max : 900 mm Epaisseur min moule : 400 mm Dimensions des plateaux : 1100 x 1100 mm Nombre de litres d’huile : 870 L Dimensions : 7,2 x 2,0 x 2,50 m Poids machine : 20 000 kg

Presse à injecter ENGEL 180 T Type : VICTORY 500/180 POWER Force de fermeture : 1800 KN - 180 T Année : 2008 Diamètre de la vis : 45 mm Volume d'injection : 318 cm³ Pression d’injection : 2040 bars Épaisseur min/max moule : 300 750 mm Distance entre colonnes : 860 x 830 mm

Key data: 1500 , 220 , 40

Presse à injecter ENGEL 150 T type ES 500/150HL Année de fabrication : 2001 En bon état de fonctionnement Force de fermeture : 1500 KN / 150 T Diamètre vis : 40 mm Volume injectable : 251 cm3 Pression d’injection : 1300 bars Rapport L/D. : 20 Nombre de zones de chauffe : 4 Ouverture max des plateaux : 950 mm Course d’ouverture : 700 mm Course de l’ejection. : 150 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 820 x 750 mm Dimensions : 5,45 x 1,60 x 2,40 m Poids : 13 000 kg

Key data: 900 , 183 , 40

Presse à injecter ENGEL 90T type ES 330/90 HL Année de fabrication : 1995 En bon état de fonctionnement Force de fermeture : 900 KN / 90 T Diamètre vis : 40 mm Volume injectable : 201 cm3 Poids de l'injection en PS : 183 gr Pression d’injection : 1300 bars Nombre de zones de chauffe : 4 Ouverture max des plateaux : 950 mm Course d’ouverture : 500 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 710 x 420 mm Dimensions : 4,22 x 1,42 x 2,00 m Poids : 5 900 kg

Key data: 11000 , 1950 , 150

Presse à injecter ENGEL 1100 T Année 1999 Nombre d’heures : 85 000 h Force de fermeture : 1100 T - 11 000 KN Diamètre vis : 150 mm Volume injectable : 10950 cm3 Pression d’injection : 1330 bars Diamètre des colonnes : 230 mm Force d’éjection : 215 N Dimensions des plateaux : 1400 mm x 1150 mm Course d’ouverture : 1800 mm Poids : 77 Tonnes

Key data: 1000 kN

Engel Insert 80V/80V/100 2F/2-K Ti-bar-less Machine, Vertical / Perfect Technical Condition Year of Make: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Ti-bar-less machine with two vertical injection units, with turntable Air Valve x 6 Hydraulic core pull x 2 Control with hot runners x 12 Infrared protective curtains Thermoplastic and rubber injection units are available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by the authorized service provider Engel in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW All offered machines are started b ...

Key data: 1800 kN

Engel e-max 440/180 / Electric machine Year of Make: 2009 Injection unit: Screw diameter: 40 mm Injection weight: approx. 199 g Spray pressure: 1950 bar Dosing volume: 220 ccm Clamping unit: Clamping force: 180 t Tiebar spacing: 520x520 mm Size of the clamping plates: 760x775 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - touch screen Additional equipment: Machine in very good technical condition, worked in clean production Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 3 Hardened injection unit - Bimetal Parallel movements Central lubrication Automatic tool height adjustment Kistler Sensor - Tool Pressure Control Original Tool Crane Dimensions: Weight: 7200 kg Length/Width/Height: 5.87x1.42x2.00 m All offered machines are started by our service technicians before they are sold ...

Engel Victory Victory 1350/260 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 55 mm Injection weight: approx. 590 g Spray pressure: 2183 bar Dosing volume: 618 ccm Clamping unit : Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 8 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 18 Injection unit is wear-resistant and resistant to corrosion Main motor of the ma ...

Key data: 2750 kN

Engel ES 1350/275 HL with the Engel ERC 53/1-E robot / machine in very good technical condition Year of Make: 2001 Injection unit: Screw diameter: 60 mm Injection weight: 547 g Spray pressure: 1834 bar Dosing volume: 618 ccm Clamping unit: Clamping force: 275 t Spar spacing: 0x0 mm Size of the clamping plates: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-bar-less machine Hydraulic core pull x 3 Control with hot runners x 16 Hardened injection unit - Bimetal Machine has been regularly serviced by the authorized service Engel Dimensions: Weight: 20000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the tech ...

Engel e-Motion 740/280 T WP with the TecnoMatic robot / Electric machine Year of Make: 2016 Injection unit: Screw diameter: 50 mm Injection weight: approx. 360 g Spray pressure: 1900 bar Dosing volume: 393 ccm Clamping unit : Clamping force: 280 t Tiebar spacing: 780x780 mm Size of the clamping plates: 1100x1100 mm Ejector: electric Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: Production line with the TecnoMatic robot Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 4 Control with hot runners x 64 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication Parallel movements Aut ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...

Injection moulding machine Engel Insert 200H/70 BJ 2011

B&A REF:  9307 TON: 1100 SCREW DIAMETER:  105MM SHOT WEIGHT: 3075 STROKE VOLUME:  3380CM3 INJECTION PRESSURE: 1600AR PLATEN SIZES:  1850 X 1810MM DBTB: 1400 X 1150MM MIN MOULD HEIGHT:  600MM MAX MOULD HEIGHT: 1200MM MOULD OPENING STROKE:  1800MM MAX DAYLIGHT:  2400MM EJECTOR STROKE:  300MM CONTROLS: CC 200 TOUCH CORE PULLING: 4 AIR VALVES: 2 MOTOR: 75 HEATING CAPACITY: 72KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

Complete control CC 90 for ENGEL injection moulding machines

machine in stock!

Engel injection moulding machine old

Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.

PET Preform injection moulding machine Clamping force 320t Spray weight 6935gr. Snail 130mm Preform extraction system SERVO IV, TPS robot TRT-M4-72-E, 72-speed, 4-stage, incl. withdrawal kit, conveyor belt LT/h 1825, dosing Motan Minicolor PET

Hydro motor for screw cylinders Injection unit size ES3550 Hägglunds Drives type CA50 20 2 0 0 N 004

Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550

Hand Terminal KeTop Panel C 35 for ENGEL Robot Viper

clamping force: 1.750 kN injection volume: 318 cm³ screw diameter: 45 mm platen size: 700 x 700 mm daylight between platens - max.: 460 mm Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description New screw

Manufacturer/manufacturer: Angel Typ/type: 330/75 HL - V Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 750 kN Holmabstand/Dist.Betw.Tiebars: -. Disk size/platen size: 660 mm x 560 mm WZ height/mould hight: min 200 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 650 mm Auger/screw size: 40 mm Stroke volume/shot volume: 201 cc spec. Spritzdr / injection pressure: 1600/2180 bar General / General Engine power: 15 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 3.8 m x 1.3 m x 2 m Weight/weight: 4900 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robots / robotic interface

Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 1100 kN Holmabstand/Dist.Betw.Tiebars: Disk size/platen size: 730 mm x 600 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 50 mm Stroke volume/shot volume: 251 cc spec. Spritzdr / injection pressure: 1300/2050 bar General / General Engine power: 18.5 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 4.8 m x 1.4 m x 2 m Weight/weight: 6000 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 2 Robots / robotic interface

Used machine in good condition. Available for immediate delivery. - Screw diameter: 40 mm - Injection pressure: 1.211 bar - Injection volume: 201 cm? - Clamping force: 700 kN - Platen size (h x v): 590 x 340 mm - Dimensions (long x wide x high): 3.370 x 3.580 x 2.640 mm - Weight: 7.500 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Clamping force: 600 kN - Mould height max: 190 mm - Platen size (h x v): 910 x 400 mm - Control: CC220

- Including YUDO SIGMA 800cs robot - Clamping force: 3.000 kN

clamping force: 4.000 kN injection volume: 2.700 cm³ screw diameter: -- mm platen size: -- mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - ejection device: 2-layer - Brush system: 2-layer Injection unit: - Injection volume max.: 2,700 cm³ Two identical systems are available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 450 mm, 63 , 25

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Engel ES200/45VTHL-PRO-ELAST (2002) Clamping force: 45 t Type: Vertical Drive: Hydraulic

Description Integrated robot: X: 1000 mm Y: 1400 mm Z: 2360 mm ROTATION 90 ° 1 BLOW (forceps) 2 EMPTY switchable

Description ROTARY TABLE: DIAM. 700 mm

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description New screw

Description New screw