eckold 板金加工 中古 販売のため

Lg.Nr. 25062 Specifications: - with pressure joining pliers ECKOLD, type MZ + hole punching device - Working pressure infinitely adjustable max. up to 500 bar - Compressive force joining pliers 25 Kn - Single cycle or continuous cycle - Cycle rate infinitely adjustable - Hose package unit – pliers approx. 4 m - Hydraulic oil capacity 15 ltr - Drive 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

- Diameter 130 mm - Weight 18,4 Kg - Steel 400 N/mm2 = 6,0 mm - Inox   600 N/mm2 = 4,0 mm - Alu 250 N/mm2 = 7,0 mm

- Diameter 130 mm - Weight 18,5 Kg - Steel 400 N/mm2 = 6,0 mm - Inox   600 N/mm2 = 4,0 mm - Alu 250 N/mm2 = 7,0 mm

- Reforming Tool type WT/NFW - Diameter 150 mm - Weight 16.9 Kg - Steel 400 N/mm2 = 6,0 mm - Inox 600 N/mm2 = 6,0 mm - Aluminium 250 N/mm2 = 6,0 mm - For finish forming and calibrating of preformed components. - It consists of a tool carrier WT 80 S and forming inserts N NFW 102  - The forming inserts NFW in steel quality are designed forone single radius and one single thickness of material only. - Different forming inserts can be put into the sametool carrier WT 80 S. - But with one set of forming inserts only one single radius in one single thickness of material can be reformed.Inserts are available different shapes

Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T

- Speeds 150 strokes - Hand ram adjustment 0 - 60 mm - Large tooling package ca 12 units  - Wheeling tooling set (englisch wheel) - Vertical troath 250 mm - Horizontal Troath 400 mm

Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T

            …the one with the continuously adjustable working speed. Depending on the workpiece or other job requirements the operator of the ECKOLD Kraftformer KF 340 can easily adjust the working speed between 220 and 600 strokes per minute. The powerful machine can form sheet metal and profiles up to 3.0 mm (m.s.) material thickness. The KF 340 Kraftformer is one of the medium-sized motor driven machines. The steplessly adjustable lifting speed ensures optimal working. A slow speed is selected to form thicker material, for flattening, straightening or very precise finish forming. A high number of strokes facilitates and speeds up stretching, doming (dishing), planishing and planing. Like with all other ECKOLD Kraftformer machines the large number of tools available makes the KF 340 power hammer the perfect “all-rounder” in the shee ...

ECKOLD KF 653 C - Force former -Projection - horizontal approx. 600mm -Projection - vertical approx. 480mm -Working stroke 8mm -Plunger adjustment approx. 80mm -Footswitch -1xTool -Formable sheet thicknesses: -Steel (400 N/mm2) max. 6mm -Aluminium (250 N/mm2) 8mm -Stainless steel ( 600 N/mm2) 4mm Dimensions: LxWxH 1.6x0.7x1.9 meters / Weight 1770Kg

A total of 10 mobile Eckold clinching pliers, eight of them originally packaged, are available. Stroke frequency: single stroke, input pressure range: 5bar-16bar, max. operating pressure: 500bar, max. pressing force at 500bar: 30kN, max. joining part thickness: 3mm, reach horizontal/vertical: 25mm/15mm, opening dimension: 6mm, working width: 50mm, machine dimensions X/Y/Z: approx. 260mm/60mm/215mm, weight: approx. 6kg. Including pneumohydraulic pressure intensifier and tail insert. Documentation available. An on-site inspection is possible.

Max. forming force: 80t, connected load: 3.5kW, current type: 3 phases, frequency: 50Hz, operating voltage: 380V, control voltage: 24V, rated current of the machine: 10A, rated current of the supply fuse fast-blow: 25A, slow-blow: 15A, weight: 1.79t. With documentation, without accessories or spare parts. Regularly maintained, machine has a defect, the speed adjustment no longer functions fully. An on-site inspection is possible.

material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

guillotine shears AG TS 2 Working thickness 2mm Adjustable stop Hold Length 1.80 m Width 1 m Height 1.40 m Weight 300 kg

Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Inv. Num. : 1607 Type: CB90VZB SL 6600 Producer: DYNOBEND B.V. Created: 2011 Parameters: 3 CNC-controlled axes Programmable speed Network Connection Windows Novell and Linux Software for work preparation Standard Specifications: Bending angle max: 200° Adjustment accuracy: 1/10° Tube torsion: 360° Booster power: 70kN Software IGES Centerline without marking Pipe length max. 6.3m Tube pre- and post-carriage 300mm Max. tube diameter 90mm Crushed tubes twisted 100 x 12 x 1 5 Min. radius over rolling process with or without mandrel > 1000mm Smallest radius with fixed tool not running and not torsional > 1 5D Repeat accuracy of machine 0.1mm 3-D bends

Max plate size 1600x3000 mm Drilling heads 1 Drilling tools per head 6 Max drilling diameter 40 mm Max drilling thickness 130 mm Spindle speed 3000 rpm Plasma torches 1

Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Sheet metal splitting and cut-to-length line for processing sheet metal coil material Max. width: 1,250 mm Min. width: 250 mm Sheet thickness steel up to 400 N/mm²: 0.4 – 1.25 mm Sheet thickness stainless metals up to 550 N/mm²: 0.4 – 0.9 mm Sheet thickness aluminium and copper: 0.5 – 1.5 mm Min. sheet cutting width: 60 mm /15 mm from coil outer edge Max. cutting speed: 30 m/min adjustable Cutting accuracy: Class "m" DIN/ISO 2768 (± 0.8 mm/m) Current: 3PH 400-488V AC/n/PE-11kW/16A (300mA fuse) Compressed air: 25 l/min (short-term)-6 bar dry and filtered Dimensions: 1.6x2.5x1.3 m Weight: 1.5 t

Sheet metal processing system P 315 / 1991 105327 Ai P4-1812+HPT 2015 + R51 272/ 1991 S4.30 / 1998 Find more here - / Contact us at -

material width: 1015 mm material thickness: 1 mm speed: von Hand weight: 240 Kg dimensions: 1420 x 600 x 750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Bystronic Model: BLT 4000 Year of Manufacture: 2001 Type of Machine : C02 Laser Find more here - / Contact us at -

Qty. 1 Second-hand sheet metal processing machine Mfc.: Vernet Behringer Type: FG2005 CNC Built: 2012 Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm Max. section: 1340 x 1000 x 60 mm Electrical Cabinet Power supply: 3 x 380 V, 50 Hz, Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar

material width: 305 mm material thickness: 1,0 mm speed: von Hand weight: 45 Kg dimensions: 500 x 340 x 420 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8739 Type: TS 3006 Producer: HACO Created: 2004 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 6 mm

Inv. Num. : 8740 Type: VR 13-31 Producer: EHT Generated: Parameters: Maximum cutting length: 3100 mm Maximum cutting thickness: 13 mm

Manufacturer: SATO Model: DHDS 3100 Year of Manufacture: 2017 Estimated operating hours: 16,000 hours - Plasma cutting system with table and extraction system. - Cutting area: 2 x 6 meters. - Equipped with plasma unit and 2 oxy-fuel torches. Find more here - / Contact us at -

Finn-Power C5-25 - Sheet metal processing center / nibbler Siemens Sinumerik 840 D CNC control Extensive accessory package with approx. 400 tools Various spare parts included in the scope of delivery incl. enclosure of the system the machine is still in operation approx. 12000 operating hours Year of manufacture 2005 Technical data Capacity: - Max. sheet size (X x Y): 2530 x 1270 mm - Min. sheet size (X x Y): 300 x 100 mm - Max. sheet thickness: 8 mm - Max. sheet weight: 200 kg - X-axis length: 2584 mm (X-42... X2542) - Max. travel speed X-axis: 90 m/min - Y-axis length: 1317 mm (Y-25... Y1292) - Max. travel speed Y-axis: 60 m/min Lifting speeds: - High Light: 3000 rpm - Max. stroke rate (1 mm inseam length): 1100 rpm - Hole to hole (25 mm inseam length): 420 rpm - Distance (250 mm stride length): 150 rpm Punching: - Punching force: 300 kN - Punching stroke ...

Manufacturer: Amada Model: LST 3015-M2 Year of Manufacture: 2011 Power Required: 4 kVA Noise Level: 70 dB(A) Weight: 1950 kg Operating Hours: 30,000 hours Pallet Capacity: - Maximum sheet size: 3050 x 1525 x 25 mm - Maximum load: 920 kg Amada 4 kW laser cutting system including shuttle table and extraction system. Operated in single-shift production, no maintenance backlog. Find more here - / Contact us at -

older Gebr. Lever shears on base frame Technical data Knife length 500 mm Cutting range approx. 3-4 mm Dimensions 800 x 170 x 1300 mm dto. incl. base frame 1300 x 600 x 1780 mm Remarks / Accessories: Underframe, small damage to the knife Maschinenladen Oeben GmbH Krahnendonk 116 D-41066 Mönchengladbach Phone: + 49 2161 662701 maschinenladen.de InfoMachine Shop

Manufacturer: Durma Model: MS 2003 Type: Guillotine shear Year of Manufacture: 2014 Find more here - / Contact us at -