dreher 板金加工 中古 販売のため

Capacity 20 kN, band width 500 mm, coil inner diameter 445-530 mm Coil outer diameter 1300-1400 mm Drive power 1.1 kW Rolling speed 16 U/min Manual spreading of the reel Crown with hydraulic unit complete documentation, operating instructions and manual

Bandwidth of 50-500 mm Band thickness 0.8 3.6 mm Belt speed 5-40 m / min Feed rollers 2 PCs Richwalzen (80 mm) - 11 PCs Working direction optional

Double coiler, coiler, decoiler, for sheet metal processing, punch, eccentric press, hydraulic press, punching machine -Handover in the current condition as seen -Drive: without -Max. Recording: Ø 590 mm -min Recording: Ø 250 mm - Recording width: 300 mm -Dimensions: 1460/1000/H1400 mm -Weight: 332 kg

Key data: 300 , 1 , 1300

Payload 1000 - 1250 kg Band width 305 and 505 mm Spreading range - 375 -520 mm Coil outer diameter 1300 mm without cabinet and control

material width:500 mm material thickness:0,2 - 3,8 mm feed length:0 - 9999,9 mm number of rolls:2 material cross-cut:128 mm² speed:60 m/min power requirement:2,0 kW dimensions (WxDxH):1,2 x 1,3 x 1,5 m roll feed:Servo control:Siemens S 7, modification 2002

material width:203 mm material thickness:0,1 - 1,9 mm feed length:101 mm weight:0,1 t dimensions (WxDxH):0,5 x 0,8 x 0,5 m

sheet width: 0500 mm coil outside dia.: 1400 mm weight max. in kg: 4000 kg plate thickness: 0,80 - 3,60 mm diam. of the rolls ca.: 80 mm feed rolls: 2 nomb. of straightening rolls: 7 exit pinch rolls: 2 speed: 5-30 m/min range of expansion ca.: 445 - 530 mm expansion: manuell total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control conversion to SIEMENS S7 in 2012 - pneumatic pressure roller on the side - pneumatically ventilated feed roller - Straightening rollers manually adjustable - lateral belt guide at the inlet - Large roller basket at the outlet - Ultrasonic transmitter for loop control - Roller feed type 1125 D - Bandwidth max. 510 mm - Band thickness max. 6 mm with full width 5.50 mm - Roll diameter 125mm - Feed speed: max. 100 m/min. - pneumatically ventilated top roller - Lateral tape guide with digital display - Inlet roller basket  ...

material width: 200 mm material thickness: 3 mm feed length: 999999 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW

Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 90 mm Material thickness: 0,8 - 5,0 mm Feeding speed: 3 - 30 m / min

sheet width - max.: 0800 mm coil weight: 3,50 t coil internal dia.: 460 -530 mm coil-outside of decoiler: 1400 mm total power requirement: 2,2 kW weight of the machine ca.: 1,95 t dimensions of the machine ca.: 1,60 x 2,20 x 2,60 m with hydraulic auxiliary drive, pneumatic lag brake, hydraulic centralized expansion, hydraulic snubber roll As is, without commissioning / without further work, Design as described in the technical data sheet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width:300 mm coil weight:2 x 1,25 t material thickness:0,4 - 1,2 mm coil internal diameter:320 - 420 mm coil external diameter:1300 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 roll diameter:30 mm speed:3 - 30 m/min feed length:0 - 9999,9 mm power requirement:3,0 + 2,5 kW weight of decoiler:0,7 t dimensions decoiler (WxDxH):2,1 x 1,4 x 1,5 mm weight of straightening machine:0,45 t dimensions straightener (WxDxH):1,5 x 0,8 x 1,1 mm weight of the feeder:0,4 t dimensions feeder (WxDxH):1,2 x 0,8 x 1,1 mm universal straightening machine:SC 12-FQ double decoiler:2352 B-FPS expansion:hydraulic lag brake:pneumatic electronic roll feed:WAV-RDS-2Z, Modell 1082 B intermittant lifting:pneumatic control:Siemens S 5

Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

Sheet width - max.: 200 mm Straightening roller diameter: 40 mm Number of leveling rollers: 5 Driven infeed and outfeed rollers Sheet thickness - min: 0.4 mm Sheet thickness - max.: 2.0 mm Weight: 170 Infinitely variable feed speed Clockwise and counterclockwise rotation Operating mode selector switch for manual and automatic operation Belt loop control very good condition

material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

guillotine shears AG TS 2 Working thickness 2mm Adjustable stop Hold Length 1.80 m Width 1 m Height 1.40 m Weight 300 kg

Line Salvagnini S4 P4 Year 2001/2003 S4 30 + P4 2220 + MD with unloading robot. Working line, regular assistance performed by the manufacturer

Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Inv. Num. : 1607 Type: CB90VZB SL 6600 Producer: DYNOBEND B.V. Created: 2011 Parameters: 3 CNC-controlled axes Programmable speed Network Connection Windows Novell and Linux Software for work preparation Standard Specifications: Bending angle max: 200° Adjustment accuracy: 1/10° Tube torsion: 360° Booster power: 70kN Software IGES Centerline without marking Pipe length max. 6.3m Tube pre- and post-carriage 300mm Max. tube diameter 90mm Crushed tubes twisted 100 x 12 x 1 5 Min. radius over rolling process with or without mandrel > 1000mm Smallest radius with fixed tool not running and not torsional > 1 5D Repeat accuracy of machine 0.1mm 3-D bends

Max plate size 1600x3000 mm Drilling heads 1 Drilling tools per head 6 Max drilling diameter 40 mm Max drilling thickness 130 mm Spindle speed 3000 rpm Plasma torches 1

Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Sheet metal splitting and cut-to-length line for processing sheet metal coil material Max. width: 1,250 mm Min. width: 250 mm Sheet thickness steel up to 400 N/mm²: 0.4 – 1.25 mm Sheet thickness stainless metals up to 550 N/mm²: 0.4 – 0.9 mm Sheet thickness aluminium and copper: 0.5 – 1.5 mm Min. sheet cutting width: 60 mm /15 mm from coil outer edge Max. cutting speed: 30 m/min adjustable Cutting accuracy: Class "m" DIN/ISO 2768 (± 0.8 mm/m) Current: 3PH 400-488V AC/n/PE-11kW/16A (300mA fuse) Compressed air: 25 l/min (short-term)-6 bar dry and filtered Dimensions: 1.6x2.5x1.3 m Weight: 1.5 t

Sheet metal processing system P 315 / 1991 105327 Ai P4-1812+HPT 2015 + R51 272/ 1991 S4.30 / 1998 Find more here - / Contact us at -

Qty. 1 Second-hand sheet metal processing machine Mfc.: Vernet Behringer Type: FG2005 CNC Built: 2012 Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm Max. section: 1340 x 1000 x 60 mm Electrical Cabinet Power supply: 3 x 380 V, 50 Hz, Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar

material width: 1015 mm material thickness: 1 mm speed: von Hand weight: 240 Kg dimensions: 1420 x 600 x 750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 305 mm material thickness: 1,0 mm speed: von Hand weight: 45 Kg dimensions: 500 x 340 x 420 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Bystronic Model: BLT 4000 Year of Manufacture: 2001 Type of Machine : C02 Laser Find more here - / Contact us at -

electric shears for metal sheets

Manufacturer: Morn Laser Condition : New Model: GH-S3015 GH-Series Type of Machine : High Speed Full Cover Fiber Laser Cutting Machine Condition : New Advantages: - High speed cutting efficiency - Safe and clean production - Zoned smoke exhaust system - High speed double platform exchanging Parameters: - Laser Power: 3000W / 6000W - Cutting Area: 3100 × 1600 mm Find more here - / Contact us at -

Manufacturer: Morn Laser Condition : New Model: MT-6000 N-6 Series Type of Machine : High Speed Tube Fiber Laser Cutting Machine Advantages: - Fast loading - High precision - Saves labor costs Parameters: - Laser Power: 3000W / 6000W - Tube Length: 6m / 9m Find more here - / Contact us at -

Inv. Num. : 8739 Type: TS 3006 Producer: HACO Created: 2004 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 6 mm

Manufacturer: Morn Laser Type of Machine : PROFILE STEEL LASER CUTTING MACHINE Condition : New Model : MT-H4510 / MT-H50120 HD Series Advantages: - Stable cutting of large-size profile steel - High-precision bevel cutting Parameters: - Profile Steel Processing Range (Customizable): 450×1000mm / 500×1200mm - Laser Power: 12000W–20000W Find more here - / Contact us at -

Inv. Num. : 8740 Type: VR 13-31 Producer: EHT Generated: Parameters: Maximum cutting length: 3100 mm Maximum cutting thickness: 13 mm

Manufacturer: Morn Laser Type of Machine : HEAVY DUTY TUBE LASER CUTTING MACHINE Conditon : New Models: MT-6000 / MT-9000 / MT-12000 X Series & L Series Advantages: - Intelligent 4-chuck technology - Truly zero tailing - Auto loading and unloading system Parameters: - Laser Power: 1500W – 20000W - Tube Diameter: Ø20mm–160mm / 200mm / 350mm / 500mm - Tube Length: Standard 6m / 9m / 12m Find more here - / Contact us at -

Manufacturer: SATO Model: DHDS 3100 Year of Manufacture: 2017 Estimated operating hours: 16,000 hours - Plasma cutting system with table and extraction system. - Cutting area: 2 x 6 meters. - Equipped with plasma unit and 2 oxy-fuel torches. Find more here - / Contact us at -

Finn-Power C5-25 - Sheet metal processing center / nibbler Siemens Sinumerik 840 D CNC control Extensive accessory package with approx. 400 tools Various spare parts included in the scope of delivery incl. enclosure of the system the machine is still in operation approx. 12000 operating hours Year of manufacture 2005 Technical data Capacity: - Max. sheet size (X x Y): 2530 x 1270 mm - Min. sheet size (X x Y): 300 x 100 mm - Max. sheet thickness: 8 mm - Max. sheet weight: 200 kg - X-axis length: 2584 mm (X-42... X2542) - Max. travel speed X-axis: 90 m/min - Y-axis length: 1317 mm (Y-25... Y1292) - Max. travel speed Y-axis: 60 m/min Lifting speeds: - High Light: 3000 rpm - Max. stroke rate (1 mm inseam length): 1100 rpm - Hole to hole (25 mm inseam length): 420 rpm - Distance (250 mm stride length): 150 rpm Punching: - Punching force: 300 kN - Punching stroke ...

Manufacturer: Amada Model: LST 3015-M2 Year of Manufacture: 2011 Power Required: 4 kVA Noise Level: 70 dB(A) Weight: 1950 kg Operating Hours: 30,000 hours Pallet Capacity: - Maximum sheet size: 3050 x 1525 x 25 mm - Maximum load: 920 kg Amada 4 kW laser cutting system including shuttle table and extraction system. Operated in single-shift production, no maintenance backlog. Find more here - / Contact us at -

5 processing stations, Production width: 230 - 1250 mm, Production length: 500 - 2400 mm, Material thickness: 0.63 - 1.0 (1.5)mm, Material type: Steel 1203 bare, Mains voltage: 400 V 50 Hz, Power: 150 kW, hydraulic pressure: max. 150 bar, Air pressure: max. 10 bar. The control system was renewed by SIEMENS.

older Gebr. Lever shears on base frame Technical data Knife length 500 mm Cutting range approx. 3-4 mm Dimensions 800 x 170 x 1300 mm dto. incl. base frame 1300 x 600 x 1780 mm Remarks / Accessories: Underframe, small damage to the knife Maschinenladen Oeben GmbH Krahnendonk 116 D-41066 Mönchengladbach Phone: + 49 2161 662701 maschinenladen.de InfoMachine Shop