doosan エンジン 中古 販売のため

Model L126TI No. of Cyl. L6 Aspiration TI Displacement (Liter) 11.1 Bore x Stroke (mm) 123x155 Output (ISO 3046, 8528 kW(ps)/rpm) 265(360) / 2000 - Dimension (L×W×H) 1235x855x1073 Dry Weight (kg) 1,060 Emission TIER-2

Specifications Classification L136 Cylinder L6 Aspiration NA Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 118(160) @ 2200 kW(ps)/rpm Medium Duty - kW(ps)/rpm Light Duty - Dimension (L×W×H) (mm) 1266 x 875 x 937 Dry Weight (kg) 743 Emissions Tier 1 Power Range (kW) 118 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

Classification L136TI Cylinder L6 Aspiration TI Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 169(230) @ 2200 Dimension (L×W×H) (mm) 1364 x 911 x 937 Dry Weight (kg) 773 Emissions Tier 2 Power Range (kW) 169 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

DAEWOO MARINE ENGINE V180 TI + GEARBOX 1800 RPM 600 HP

DOOSAN PU126TI 395 HP - 2100 RPM / 0 HOURS AFTER OVERHAUL / NEW PISTON RINGS / CONNECTING RODS / BEARINGS

Key data: 48 KW, 60 kVA, 400 V

ON HAND STAGE V 30 months warranty Stamford Alternator ComAp Control Generator Set Specifications: Model: EQ-DSV4536 Primary power: 60 kVA / 48 kW Standby power: 60 kVA / 48 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine Make: Doosan Engine Model: D34 Displacement (L): 3.41 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Emissions: Euro Stage V Dimensions of the generator set: Length: 2430 mm Width: 1056 mm Height: 1600 mm Weight Open: - kg Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Preheater (or preheater) Lubricating oil and antifreeze Batteries and cables Elect ...

Key data: 268 KW, 335 kVA, 230 V

Produced in the EU 30 months warranty Generator Set Specifications: Model: EQ-H335268 Emergency power output: 335 kVA / 268 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Hyundai Engine Model: DP086CE Charging: Turbocharging & Intercooler Fuel System: In-line Injection Regulator Type: Mechanical Alternator Specifications: Alternator Brand: WEG Alternator Model: AG10-250MI10AI Generator dimensions (closed): Length: 3800 mm Width: 1300 mm Height: 2200 mm Weight open: 2950 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine WEG Alternator (Model: AG10-250MI10AI) ABB Circuit Breakers Protection system in manual operation Flexible oil pipes and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically painted, welded steel chassis Fuel tank housed ...

Listing ID: 22693 Brand Engine: Doosan Model: L126 TIM Power: 400 PS (294 kW) RPM: 2100 General condition: Very low hours only test hours Features: Flywheel housing: SAE-1 Flywheel: 14 inch Starter: 1 x 24V Governor: Mechanical Exhaust system: Water cooled Turbo: Water cooled Cooling system: H-E cooled Weight: 1060 kg Dimensions (cm) 150x90x130

Key data: 48 KW, 60 kVA

We currently offer: Number 47 Doosan generator set Type: G60 Engine John Deere Type: CD4045G Generator Leroy Somer Power 60.4 KVA / 48 KW Hz 50 RPM 1500 AVR control R438 Year of construction 2012 Hours: 17727 Diesel pump missing You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Engine Brand: DAEWOO, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Working Hours: 811 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 40 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 50 , Generator Hz: 60 , Generator Volts: 240 , Generator Amps: 120.2 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/daewoo-daewoo-po34ti-generator -50-kva-used/22423, , = More information =, , Empty weight: 2.000 kg, Width: 42 cm, Type number: DAEWOO PO34TI GENERATOR 50 KVA

Engine Brand: DOOSAN, Condition: CORE, Engine Cooling Type: Exchanger (on engine) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 230 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/doosan-gv158ti-used/731, , = More information =, , Type: Engine, Type of fuel: LPG, Type number: GV158TI; Transport weight [kg]: 1255

Key data: 439 , 1500

Engine is a general-overhaulted exchange engine with 12-month guarantee. 1x at stock one available. MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven Germany Tel:0049 (0)4281-950583 Fax:0049 (0)4281-950585 email:info@miw-zeven.de abc.miw-zeven.de

4 Cyl. Ford industrial engine, alternator, tractor Ford 5000, pass.f. New Holland Mähdr. 8030

772KW @ 1500 rpm

Yanmar 6N18AL

Torque: 12 Nm volt: 144 V ampere: 11 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Carbon fiber shaft for ALV brake 440kW of 1000Nm.Spezialwelle with Flaschstücken. 980 wave length D = 125 flange outer 150.Ohne adatper (photo-packed).Info 0170/2204056Mail fa.raupp@t-online

DEAR'S SALE, DEUTZ 6M540 2 CRANKSAFT STD 1 BLOCK COVER, LINER, CONROD, PISTON ANY PARTS Brgds Hakan KUSCU +905323642509 info@kscege

Dear's sale, Wartsila 16v25 engine complete spare parts inc block and cranksaft full cover, piston, liner, conrod, fuelpump etc... built 1997 brgds Hakan KUSCU info@kscege.com

power capacity: 0,38 kW volt: 0- V turning speeds: 2000 U/min turning speeds: U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOR SALE ... DEUTZ MWM TBD 620 V8 ENGINE 1997 YOB AT TURKEY HAVE A GDY SIR; WE VE 1 SET DEUTZ MWM TBD 620 V8 ENGINE AT STOCK . ENGINE WORKING HRS IS 2320HRS ENGINE IS READY TO LOAD ON TRUCK .. PLS FIND DTLS OF ENGINES AT BELOW TBD 620 V8 ENGINE NO 620.08 000166 YOB 1997 1500RPM 880Kw IF YOU VE ANY FURTHER QUESTIUONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba Best Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Dear's Sale, SKL 6NVD 48A-2U complete Engine...………….. 2 pc Piston head close type .. 10pcs Piston head open type ... 6 pcs Conrod... 6 pcs Piston .. 6 pcs Liner ... 10pcs Cranksaft 6cyl .. 2 pc Gavarnor 2 pcs Ready for transport Best Regards Hakan KUSCU info@kscege.com

Torque: 23 Nm volt: 146 V ampere: 20 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Now available: MaK M25 6 cylinder engine block in stock and ready to be sold. Ask us for more information and prices.

Torque: 12 Nm volt: 145 V ampere: 15 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0,38 kW volt: 174 V ampere: 3,3 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ABC ENGINE 8MDKC / 883 KW / RUNNING TAKEN OUT

ampere: 20 A volt: 146 V Torque: 23 Nm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crankcase (engine block) Deutz TBG 620V12K

power capacity: 63 kW volt: 380 V ampere: 204 A weight of the machine ca.: 0,76 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very Good Condition MAK 552 Spares 1.CON ROD-8 2.CYLINDER HEAD-8 3.FUEL PUMP-8 4.ROCKER ARM ASSEMBLY-8 5.CRANKSHAFT-1

power capacity: 2,09 kW Torque: 10 Nm ampere: 13,0 A volt: V Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1027 KW, 1805 1/min

TO WHOM IT MAY CONCERN ; WE VE 2 PCS USED PROPULSUION ENGINES DEUTZ MWM TBD 620V8 AT OUR STOCK. ENGINES WERE DISMANTLED FROM SUPER YACHT . ENGINES ARE FULL ORIGINAL MARINE ENGINES. ENGINES ARE IN GOOD WORKING CONDATIONS . ENGINE DETAILS ON BELOW TYPE. : DEUTZ MWM TBD 620V8 YOB. : 2002 KW. : 1027 RPM. : 1805 ENGINES NO. : 2203455 & 2203456 ENGINES READY TO INSECTIONS AT OUR WARE HOUSE AND READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. ENGINES HAS ALSO ZF GEAR BOXES ( THOSE CAN SELL SEPERATLEY ) ZF 4600 NR CAP. AYHAN UGURLUBAY With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

power capacity: 1,8 kW volt: 167 V ampere: 12,5 A Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 29 kW volt: 129 V ampere: 29 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 4,4 kW ampere: 26,0 A weight: 20 kg volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 23 kW volt: 127 V ampere: 33 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: . kW volt: . V ampere: . A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torque: 12 Nm volt: 144 V ampere: 11 A power capacity: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volt: 150 V ampere: 19 A weight: 20 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unbek. kW volt: unbek. V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unbek. kW volt: unbek. V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unbek. kW volt: unbek. V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unbek. kW volt: unbek. V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unbkt. kW volt: unbkt. V ampere: unbkt. A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unbek. kW volt: unbek. V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unbkt. kW volt: unbkt. V ampere: unbkt. A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unkbt. kW volt: unbkt. V ampere: unbkt. A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kW volt: 0 V ampere: 0 A new motor with options G45 und K42 Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 30 kW volt: 380 V ampere: 58 A new motor with options G45 und K42 Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 3 kW volt: 380 V ampere: 6,8 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kW volt: 0 V ampere: 0 A new motor with options G45 und K42 Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CAT C13 Oil Pan Part Number: 210-1745 Price/piece: 350,-€ (discount for larger purchase quantities)

Hello all, We have in our stock in Istanbul Turkey 3 Wartsila W32 Cylinder head covers in almost brand new condition (slightly used) Standart exhaust seat bores, No cracks or wielding Water pressure tested With reports available Please contact us at info@fin-marine.com Regards

ELECTRIC BOARDS GIFAS 63 Amp. 80 Amps And 32 Amp. (90% are 63 Amp.) All in compliance with C.E. In addition, about 20 pieces of West Electric 40 Amp panels, recent, without C.E.

MAN 16V32/40 Crankshaft 2 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition STD size Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine

Sulzer 8ZAL40 S Crankshaft Available in our stock in Turkey Came out of 2015 Sulzer ZAL40S engine Std sized main journals and crank pins Without any cracks or welding Please contact info@fin-marine

Side channel blowers See nameplate, All 8 are the same!

Key data: 337 KW, 1500 1/min

New engine block Scania DI/DC12 with OE number 2055383 at special net price Net/piece 12.595€ Price is subject to VAT Gross price: 17.381€ MIW Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone:0049(0) 4281-950583

Torque: 10 Nm ampere: 5,6 A weight: 20 kg power capacity: kW volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: Mak Model: 8M25C 8 cylinders n line IMO II Built year: 2014 Condition: New / Unused Output: Rated 2,666 kW at 750 rpm 2 Counter Clockwise rotation 2 Clockwise rotation Compressed air starting suitable for operation with MDO max. viscosity: 11 cST/40 C Fuel consumption: 187 g/kWH at 100% rated output 184 g/kWH at 85% rated output Quantity: 4 With ABS class certificate. Contact us at infoheeyas.co.uk #mak #engine #new #ship #vessel #boat #shipengine # caterpillar #makengine #power #energy #propulsion #sailing

Key data: 625 KW, 2 1/min

2x Jenbacher gas engines JMS 312 built in 2008, with brand new generator, exhaust gas heat exchanger next to the engine, additional oil tank. No NOX control. Modules are stored and preserved, location Schleswig, Holstein, modules immediately available, ideal as exchange modules in the event of inspections or fire damage.

Torque: 10 Nm volt: 24 V weight: 20 kg power capacity: kW ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 KW, 750 1/min

Make: MaK Four-stroke marine main diesel engine, to drive a propeller (2 CPP-rudder propeller) Model: 6M25C Built year: 2015 Condition: New / Unused Rated Output: 2000 kW at 750 rpm Design: 6 cylinders in line, IMO II 2 counter-clockwise rotation non-reversible. Compressed - air starting suitable for operation with gas oil max viscosity: 7 cST/40 c

Torque: 12 Nm volt: 145 V ampere: 15 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0,449 kW volt: 174 V ampere: 3,1 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: . kW volt: . V ampere: . A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Motor controlMLFB: 6 SC6612-0CA01Fabriakt Nr: T 317 M 033Product status : A The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions of business and sale apply.About usmore than 400 of our own machines in stockover 15,000 m² storage area, crane capacity 70 tmore than 10,000 items accessories for your workshopIf you want to sell machines production lines or your company, please contact us.You will find further offers on our website.Viewings are possible by arrangement.We look forward to your visit.Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 110 KW, 1500 1/min

Removed in very good condition rotating

power capacity: 1,54 kW volt: 165 V ampere: 10,7 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m ICE 50 IM B5 165 V max 3000/min 10,7A 1,54kW Mo= 6,0Nm Io=12,7A VDE0530 TH.CL.100K Mo max= 6,4Nm Io max= 14,7A TH.CL.F.130K Tacho 1HU1053 20MVMIN LOAD 13K OHM The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was crea ...

power capacity: 18,5 kW volt: 400 V ampere: - A total power requirement: 18,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: - m N0. 4700 Parallel shaft geared motor / geared motor NORD / Getriebebau NORD SK 6282 AZ - 180 M / 4 TF H2 n 155 min-1 / max. 2454 Nm / i = 9.39 / hollow shaft Drive: 18.5 Weight approx. 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An unused explosion-proof three-phase motor WEG is available. Power: 37kW, voltage: 380V-415V/660V/460V, frequency: 50Hz, number of poles: 2, size: 200M/L, degree of protection: IP56, explosion protection: Ex eb, zone: 1, group: IIB, temperature class: T4 (135°C), cooling type: TEFC (surface-cooled with closed fan), insulation class: E, temperature class: G, operating mode: S1. Documentation available. On-site inspection is possible.

Following Lub Oil Pump of MAK ENGINE is available for sale. Make ZPM GMBH Type WD5/WDU5-2-F Nr. 10010/6/2/2008 N 2000 1/min Q 685/780 L/min Bar 8/3

An explosion-proof high-voltage motor Loher is available. Mounting type: IM B3, voltage: 5000V, current: 61A, power: 400kW, power factor: 0.79, speed: 597rpm, thermal class: F, protection class: IP55, explosion protection type: EEx d e II C T4, weight: approx. 5670kg. Includes built-in resistance thermometers. Documentation available. An on-site inspection is possible.

Jenbacher 320 refurbished cylinder heads are available. 18 pcs - Quantity For pricing and information, contact us today to get a quote.