costa 粉砕機 中古 販売のため

SPECIFICATIONS: Grinding/calibration line Editing: from above and below 2 motors with 18.5 KW each Cardan drive Sanding belt dimensions mm: 2,620 x 1,180 Vacuum carpet

Catalog No. 6809 TECHNICAL DATA - track width 350mm - roller width 370mm - max cutting height 200mm - max disc diameter 300mm - disc hole diameter 80mm in advance: - repellants - pressing sliding shaft - repellants - 2 smooth sliding shafts - repellants - shaft with saws 75kW - 3 smooth sliding shafts - repellants - smooth sliding shaft from down: - sliding roller - repellants - caterpillar - shaft with saws 95kW - caterpillar - 1 output shaft, toothed, pulling - rollers pressed pneumatically - max disc diameter 300mm - electric lifting of the upper body up/down 1.1 kW - automatic central lubrication - smooth adjustment of the feed speed 3kW - diameter of the exhaust connection 190mm, 200mm - feeding table with guide and pneumatic clamp rolls in the feeder: - 1 sliding, 9 pulling - dimensions of the feeder length / width / height 6520x1300x1050mm - dim ...

SECOND-HAND WIDE BELT SANDER COSTA MOD. 60 CC/2 1150 - CE RULES - Working width 1150 -Volt. 380/50 - S/N 951121/DR3 - Year 1996

CATALOG NO. 6911 TECHNICAL SPECIFICATIONS - track width 350mm - shaft width 370mm - max cutting height 200mm max dial diameter: - on the upper shaft 340mm - on the bottom shaft 300mm - disc bore diameter 80mm in advance: - repellers - 2 pressure sliding shafts -Pressure - shaft with saws 37kW - 2 smooth sliding shafts from below: - introductory table + guide strip - repellers -caterpillar - shaft with saws 37kW -caterpillar - 1 output shaft, slip, smooth - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the upper body up / down 1,1kW - automatic central lubrication - electrically adjustable smooth regulation of the feed speed 3kW - diameter of extraction connection 230mm, 250mm - dimensions length / width / height 3000x2300x1900mm - weight about 5000kg ADVANTAGES – Italian production – two-shaft – used multi-saw, very good condition Net price: 19890 ...

SPECIFICATIONS: Processing width: max. 1400 mm 2 adjustable speeds Motor 1: 30 kW Motor 2: 22 kW COMPOSITION: Group I: Steel roller Ø 400 mm Group II: 2 steel rollers of Ø 130 mm each

SPECIFICATIONS: Sanding belt size: 1380 x 2620 mm Max. working height: 160 mm Diameter of the rollers: 250 mm 3 independent motors total KW 36.0 Electronic Band Oscillation Front and rear support rollers Speed variator Pneumatic Shoes Hardness of the rubber rollers Reel I: 90 sh Reel II: 75 sh III Reel: 55 sh

Multi-Blade Saw Costa Leopard S Year: 1981 Cutting height 220mm 2x75hp new conveyor belt, replaced in 2015 Width chain: 370mm Cross conveyor 5 strands

For sale is an entire fully CNC-controlled planing mill. The planing mill can be visited during operation. A visit training is possible when buying before dismantling. The system has been in reliable operation since 1981 and has always been professionally maintained. Equipment: 1. Stacking Task 2. Rupa vacuum lifter - Age: approx. 1.5 years 3. Cross Conveyor 4. Canali Cut-off Band Saw - 2 band saws 5. Longitudinal/transverse conveyor incl. roller conveyors 6 Costa planing machine with 10 spindles - Fully CNC controlled Spindle configuration: 1 spindle horizontal 2 Lifting spindle right vertical 3 Lifting spindle left vertical 4 Lifting spindle horizontal 5 Lifting spindle right vertical 6 Lifting spindle left vertical 7 Lifting spindle top horizontal 8 Lifting spindle bottom horizontal 9 Lifting spindle at the bottom horizont ...

Satin sander COSTA LEVIGATRICI model S A2 TS 1350 : – with electronic PCM control and touch-screen video – useful working width 1350mm – useful working thickness from 3 to 160mm – variable feed speed from 5 to 25 m/min – with perforated belt and depressor – n° 1 belt unit with pad, 2620mm belt development, with air blowers belt cleaning – n° 1 scotch-brite group (inside the machine) Year 2000, CE regulations

1. Dear Ladies and Gentlemen, I refer to your mail to Mr. Schmidt and send you information about the sawmill for sale as requested. I would like to sell the system completely to a buyer and then agree on a package price for the following parts of the system after viewing. The plant is located at the site and is still fully connected. It consists of: 2. 1. Log feeding (cross conveyor, EWD step pusher, block hoist with 2 ejectors) 2. Creel system, Esterer HD 30, with splitting wedge (Arta), outfeed roller conveyor with liftable cross conveyor, and roller conveyors for recutting with lifting cross conveyor to the Costa plant 3. Separation step to the Costa feeding, with infeed roller conveyor to the Costa Mamut cross-cut saw, incl. metal detector 4. Costa Mamut model cross-cut saw, for cutting from 800 to 3000 m, with transfer to Costa double shaft saw "Leone"  ...

Manufacturer: Costa, Type: KA CCC 1350, Year: 2003, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 1350 X 2620, Rollers: 3, Längsschleifaggregate: 3, Bürstenaggregate: 1, Steel roller: 2+1 Gummi, Bürstenaggregate: 1, Band 1 Leistung kW : ca.20, Band 2 Leistung kW : ca.20, Band 3 Leistung kW : ca.20, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 2,2, Constant table hight: yes, Brushing unit: yes, Year :2003

Manufacturer: Costa Inert Trocknung, Type: C X C 1350, Year: 2011, Work piece width min-max mm: 50-1350, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Gesamtlänge UV Modul mm: 1300, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Position of lamps: gerade, Power per lamp watt UV: 60-120, Feeding speed m/min: 5-20, Conveyor: Band, Exhaust air diameter mm: yes, Feedin speed m/min: 6-25, Belt conveyor: yes, Year :2011

Manufacturer: Costa, Type: Strettoio, Year: 1999, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 2200, Stages: 5, Year :1999

Manufacturer: Costa, Type: SbF , Year: 1999, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Rubber roller: yes, Band 1 Leistung kW : 15, Transportbandantrieb kW: 1,1, Brushing unit: yes, Year :1999

Manufacturer: Costa, Year: 1999, Foil stations: yes, Shrinking tunnel mm: 1700, Year :1999

Manufacturer: Costa, Type: Lince, Year: 1999, Cutting widht mm: 300, Power engine kW: 58, Year :1999

Manufacturer: Costa, Type: Nastro, Year: 1999, Length mm: 2300, Working widht mm: 400, Drive power kW: 0,3, Year :1999

Manufacturer: Costa Breitbandschleifmaschine, Type: CCT/1350, Year: 1995, Monting of the machine: Stahlwalze/Gummiwalze/Schuh, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Steel roller: yes, Band 1 Leistung kW : ca.30, Band 2 Leistung kW : ca.30, Band 3 Leistung kW : 17, Continous adjustable feeding speed m/min: 10-25, Transportbandantrieb kW: ca.3, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Weight in kg: ca.8000, Year :1995

Manufacturer: Costa, Type: T 1350, Year: 1998, Monting of the machine: schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Längsschleifaggregate: ca.17, Bürstenaggregate: yes, Band 2 Kombiaggregat Walze/Schuh: 10-20, Belt 4 pressure segment belt: yes, Belt 4 synchronous and reverse run: 32, Elektronische Tastung mm: yes, Table hight adjustment by engine: ca.1,5, Transportbandantrieb kW: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Year :1998

Manufacturer: Costa Giardina Tomanin, Type: Hochglanzlackierstrasse, Finished product: Hochglanz und Glaslackierung, Work piece width min-max mm: 150-1300, Min.-max. workpiece height in mm: 3-80, Min.-max. workpiece length in mm: 150-2800, Feeding speed min-max m/min: ca.10, Inlet conveyor: yes, 2 paint roller: 2 Stück Tomanin Lackwalze, 2 UV dryer lamps/Watt: 1 Lampen Giardina 80 Watt, 3 UV dryer lamps/Watt: 2 Lampen UV<CRLF>Giardina 80-120 Watt, Sanding machine: Costa Lackschleifmaschine Quer/längs, Available: sofort,

Manufacturer: Costa Lackschleifmaschine, Type: C 1350, Year: 1999, Control: Costa, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Rubber roller: yes, Shore roller 1: 40, Band 1 Leistung kW : 36, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Noise enclosure: yes, Workpiece emitting device nozzles: yes, Year :1999

Key data: 1350 mm, 2 st.

CALIBRATING SANDING machine with 2 belts (2 independent motors) model COSTA series SK 5 CC 1350 second-hand machine working conditions Excellent , machine as new machine with inverter on the belts and on the carpet fixed table, moving head machine with CE regulation: YES instruction booklet, CE declaration of conformity: YES for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various technical data : max. working width mm. 1350 max working height mm. 160 min working height mm. 4 dimensions of abrasive belts mm.1380 x 2620 advancement speed belt , with inverter , from 3 to 15 m/min (motor power Kw 1.1) automatic centering perforated carpet (there is no vacuum group) composition (2 belts, 2 independent motors) : 1st unit : rubber calibrating roller - diameter mm 200 - shore 85 - motor power Hp 10. with inverter  ...

Manufacturer: Costa, Type: SbF, Year: 1999, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Shore roller 1: ca.35, Längsschleifaggregate: 11, Belt 1 shoe unit: regelbar, Band 4 Schleifbandgeschwindigkeit m/s : yes, Table hight adjustment by engine: yes, Elektronische Tastung mm: 5-25, Separation of sampling in mm: 0,25, Continous adjustable feeding speed m/min: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Constant table hight: yes, Year :1999

Manufacturer: Costa, Type: CCC + CCC 1150, Year: 1998, Monting of the machine: obenWalze/Walze/Walze , Equipment of machine 2: untenWalze/Walze/Walze, Double sided sanding line: yes, Sanding width mm: 1150, Sanding hight mm: 120, Number of sanding belts: 6, Sanding belt dimensions: 2620 X 1150, Table hight adjustment by engine: yes, Rubber roller: 3 +3, Shore roller 1: 70, Shore roller 2: 70, Walze 3 Shorehärte : 60, Längsschleifaggregate: ca.34, Belt 2 shoe unit: ca.22, Belt 2 synchronous and reverse run: ca.17, Belt 3 synchronous and reverse run: 34/22/17, Table hight adjustment by engine: yes, Combi unit roller/shoe: 8-20, Table hight adjustment by engine: ca 3 + 3, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Pressure pads for short workpieces: 150, Year :1998

Manufacturer: Costa Kalibrieranlage, Type: KA CC 1350, Year: 2007, Control: Siemens/KEB, Monting of the machine: 2x Stahlwalze geriffelt, Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1380, Table hight adjustment by engine: yes, Steel roller: 2, Längsschleifaggregate: 30, Belt 2 shoe unit: 22, Band 2 Schrägstellbar Grad : no, Band 2 Innenliegendes Drucklamellenband : nur Gegenlauf, Table hight adjustment by engine: yes, Elektronische Tastung mm: 8-20, Separation of sampling in mm: 2,2, Table hight adjustment by engine: variabel, Continous adjustable feeding speed m/min: yes, Constant table hight: no, Brushing unit: yes, Werkstück-Abstrahleinrichtung: 3400, Diameter/ brush bristles: yes, wast cleaning: Pneumatische Absaugvorrichtung dabei, Oszilation dabei, Year :2007

Hersteller : Costa, Type: Optima 2000 CNC, Year: 1993, Control: CNI, Positioning of CNC axis: yes, Double edge bander: yes, Hand-over: yes, Longitudinal edge banding: yes, Sanding machine: no, Tool exchange places: yes, Working width min-max mm: 320-4000, Arbeitshöhe min-max mm: 30-100, Saw Units: 1, Double edge bander - milling units/side total: 1, Spindle length of double edge bander mm: 620, Double edge bander with stoppers: yes, Longitudinal milling units total: 5, Längsprofiler Fräsaggregate linke Seite: 2, Längsprofiler Fräsaggregate rechte Seite: 2, Längsprofiler Fräsaggregate linke Seite: 2, Longitudinal milling units horizontally: 1, Spindle length - longitudinal milling mm: 320, Spindle diameter - longitudinal milling mm: 50, Feeding speed min-max m/min: 2,5-23, Vorschub stufenlos: yes, inkl Werkzeuge, Year :1993

Various old sawmill machines are available. 1) Double shaft saw Costa Leonard, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Step feeder Esterer WD, max. log length: 6000mm. 3) Frame saw Esterer HD 30, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Multi blade saw Costa Multiprisma 35, max. log length: 6000mm. 5) Drum chipper Zeno, drive power: 55kW. 6) Board stacking machine Zimac, working length range: 800mm-3000mm. 7) Steel chimney stack Schicks, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on site inspection is possible. Individual sale possible by arrangement.

CATALOG NO. 6985 TECHNICAL DATA - max width of the workpiece 300mm - height of the workpiece 200mm - unit: corrugated rubber roller + shoe + metal roller - working table 1230x440mm - belt 300x1900mm in advance: - rubber roller, sliding - aggregate about 7.5 kW - sliding roller, rubber from down: - pulling tape - pneumatic oscillation - 2 types of feed speed - feed motor 0.85 kW - diameter of the exhaust connection 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530 kg – unpainted – used grinder - very good condition Net price: PLN 13900 Net price: 3124EUR Net price calculated according to the exchange rate of 4.45 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Vollmer CHHF 21 H - Machine for single-sided grinding Year of construction: 1989 S/N 907 Make: Vollmer Germany in good working condition The technical data of the CHHF 21H at a glance: Circular saw blades Outer diameter 80 to 700 mm Bore diameter 20 to 105 mm Tooth pitch from 8 mm Hook angle up to 30° Radial clearance angle -7° to +3° Tangential clearance angle up to 5° Connected load approx. 0.52 kW Weight approx. 85 kg Dimensions: 70 x 50 x 80 cm Cisei8tfrg This machine has been specially designed for the repair of lack of carbide teeth. Newly inserted tips are used in the existing teeth. With this tabletop version, VOLLMER offers a a particularly economical, space-saving solution. The CHHF 21 H works according to the wet grinding process. During the grinding process, the grinding unit manually moved over the tooth flanks, with the saw blade Saw blade ...

Grinder for bucket seats with 2 air bellows

Orbital sander Comec LC/15AV Element diameter min/max 10-100mm 4kw main motor 2×0.25kw feed motor Sanding belt dimensions 1220x70mm CE Certified

Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg

Grinding machine (lower grinder) Heesemann type LSM 8 – U Specifications: • Cutting width (mm): 1300 • Workpiece thickness max. (mm): 3 -140 • Brushing device: brush roller diameter 150 mm • Drive for brushing device (kW): 1.5 • Transport bed: 3.0 kW FU 4.0 kW • Feed speed (m/min.): 5 - 25 • Workpiece conveyor belt suction clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total electricity connection (kW): approx. 73

oscillating belt sanding machine model VOLPATO NTS 150/C for wood edges, panels, furniture, doors, window frames and various second hand machine , like new , used very little working conditions : Excellent , like new CE regulation : Yes 45° tilting work table possibility of sanding curved pieces using the driven roller + small radius supplementary rollers diam.mm.25-30-35-40-45 mechanical oscillation with a dedicated motor via a connecting rod/crank system Technical data : Worktop mm.280 x 1000 Tiltable worktop mm.300 x 950 Sanding belt development mm.150 x 2580 Driven roller diam. mm.75 Additional worktop mm.300 x 300 Abrasive rolls available diam. mm.25-30-35-40-45 main motor power Hp 4 Motor for oscillation Hp 0.5 Oscillating stroke mm.20 Overall dimensions cm.182x105 H=cm. 150 volt. 380/50 Machine weight kg.400

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1500 Technical data: Power supply: 380-400 V Engine power (hp): 3 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x 16 Grinding Angle (degrees): 0-50 Dimensions (mm): 2310 x 790 x 1810 Max. sanding length (mm): 1500 Weight (kg): 775 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage space LED lighting for a good view of the gr ...

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1000 Technical data: Power supply: 380-400 V Engine power (hp): 1.5 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x16 Grinding Angle (degrees): 0-50 Dimensions (mm): 1810 x 700 x 1810 Max. Grinding Length (mm): 1000 Weight (kg): 500 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage ...

Grinding machine Kündig type BOTOP-4 1100 RP RP Specifications: • Grinding from above and below: with roller and pneumatic sanding shoe unit • Machining of parts on both sides: in one pass • Above-average working speed, reduced workload, excellent surface finish • Working width (mm): 1100 • Feed: 1.5 kW each over FU • Height adjustment: 0.75 kW each • PLC Omron • Vacuum: 1.5 kW • Enormatic: Automatic measurement of workpiece thickness, automatic adjustment and automatic start of feed and grinding process

Grinding machine Löwer type HBS 400 Technical data: - Grinding width max. (mm): 390 - Grinding height max. (mm): 390 - Sanding shoe from above: 1 - Grinding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Transport carpet: for material feed - Feed speeds (m/min.): 6/11/16 - Connection for suction diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic abrasive belt clamping - Special HBS sanding shoe: for conforming grinding with thickness differences of up to 4 mm or crooked workpieces - Selector switch adaptation grinding / calibration - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness scanning - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant