buzuluk ゴム製機械 中古 販売のため

pneumatic Bale cutter max. Width 550 mm max. Length 800 mm Blade stroke 280 mm

Tangential nett volume 70 l drop door AC motor 320 kW / 380 V / 50 Hz, 1483 RPM Year 1987

Tangential Chamber volume 70 l, hydraulic drop door AC motor 320 kW / 380V / 50 Hz, 1483 RPM Year 1987 Previously used for PVC.

Input pinion Drawings Nr. 20015-76D2

Central gear Drawing no. 20015-97

Side wheel Drawing no. 20015-81, 20015-82D2

1 x Buzuluk 240 litre Internal mixer Model: 14630, year: Dec 2008 (body and hopper), Batch size: 200 kgs, Drilled sides, Self sealing type dust seals, Oil injection, Hydraulic drop door with linear actuator and toggle latch, Stellite faced drop door, Two wing tangential rotors. 20in pneumatic hopper. 3 zone TCU Full unidrive gearbox (Make Skoda), with 630kW, 6000V, 739rpm, 73.5A slip ring motor and Oil filled starter. In very good condition.

big wheel Drawing no. 20015-19

Screw (small) Drawing no. 14203-461D1

NIP adjustment screw with more grooves

1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.

Bull gear

Pinion Drawing No. 14240-113 z=26

front roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) Unused

rear roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) unused

NIP adjustment nut Drawing No. 14240-216E3

NIP adjustment screw Drawing no. 14240-517

Worm gear (small) Drawing no. 14240-546D1

Key data: 300 , 600

Rollers: dia. 300 x 600 mm Roll surface: smooth Rollers type: hollow bored NIP adjustment: Manuel Engine: 22 kW

Bull gear z=82

Seal Drawing No. 14430-2815C2

NIP adjustment screw Drawing No. 14204-1168D1

Seal Drawing No. 14430-2818C2

Seal Drawing No. 14430-2824C2

Gearbox TSA 031 370-1-07 Manufacturer VSS Kosice for mixing mill Buzuluk 660x2100 mm , Type 14821 for right side i = 10:1

Bull gear Drawing No. 14272 -161 C1 z = 113

Pinion Drwaing No. 14272 - 167 C1 z=20

Pinion Drawing No. 14821- 167 C9 z = 23

Break

Knife Drawing No. 05714-223C1

Drive 210 kW / 985 rpm, 380 V, with starter

Covers for bull gear and friction wheels

Guided from bronze Drawing No. 05714 -227D1

front roll 560x1500 for mixing mill Buzuluk 14823

rear roll 560x1500 for mixing mill Buzuluk 14823

Key data: 560 , 1500

Mixing mill 560 x 1500 mm Buzuluk Type 14203 Roller bearing Motor: 132 kW Motorized NIP adjustment

3 to 5-Roll calender Buzuluk Number of rolls: 4 pcs. Roll diameter: 150 mm Roll length: 400 mm

Key data: 400 mm, 1000 mm

Buzuluk 14231 CE conversion in 2010 Antifriction bearing Motor: 55 kW Motorized NIP adjustment Baseplate

roll diameter: 660/700 mm roll length: 2100/1800 mm rolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kW Condition: used Specification: 4-Roll L-Calender - Line - second-hand 4-roll Buzuluk L-calender 700x1800 Mixing mill Buzuluk 660x2100 Complete 4-roll L-calender line. The line was used for the production of transparent PVC. However, the basic machines can also be used for rubber. The most important machines in the line: Pos. 8: Liquid mixer make Trusionma hot and cold Pos. 10: KO Kneader make BUSS Item 12: Buzuluk 660x2100 mixing roller mill Item 14: 4-roll L-calender make Buzuluk 700x1800 Items 15-19: Tempering and basin equipment behind the calender Roller conveyor Item 20: Layer thickness profile measuring device Item 23: Rewinding device The system was used for transparent soft PVC. Machines are still installed. The data for this ad was  ...

The main machines in the line: fluid mixer Trusioma hot and cold KO-kneader BUSS Mixing mill Buzuluk 660x2100 mm 4-roll calender Buzuluk 700x1800 mm, inverted "L" tempering and stretching device behind the calender – roller track film thickness profile measuring device winding device

Key data: 660 mm, 2100 mm

4 nos. Buzuluk 84" Mills available! Drilled Rolls, Rollerbearings, electrical Nip adj., Bullgear Drive 2 x left Hand Drive 2 x Right Hand Drive Description attached!

roll diameter: 700 mm roll length: 1800 mm rolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kW Condition: used Specification: 4-roll L-calender 700x1800 - used - BUZULUK 4-roll L-calender 700x1800 Type: 04706/P1 - Reverse L-shaped roller arrangement - The system was used for the production of PVC films - Film thickness: 0.05 - 1 mm - Can also be used for rubber - Maximum product width: 1,600 mm - Working speed: 6 - 60 m/min - System features roll bending and cross axis - BUZULUK temperature control and stretching device behind the calender - Year of manufacture: 1996 - Consists of 13 stretching and pulling rollers behind the last roller of the calender - The device is supplemented by 4 polishing rolls, - these 4 polishing rolls are temperature-controlled, - all rolls are driven via cardan joints, - all rolls can be temperature-controlled and  ...

Key data: 300 mm, 600 mm

Diameter: 300 mm Length: 600 mm Surface: smooth NIP setting: manual Motor: 30 kW Siemens Dimensions: approx. 1700 x 1560 x 1635 mm Weight: approx. 3000 kg CE marked from 2018 (engine with reverse gear, knee emergency stop)