balkancar クレーン 中古 販売のため

Wire rope hoist, hoist, electric wire rope hoist BALKANCAR T 0243 MA ( T0243MA ) year: 1982 Load capacity: 2000 kg Lifting height: 12 m Lifting speed: 1.1.06 4 / 8 m/min 380 V 3AC 50 Hz approx. 10 m control cable New !' Dimensions: 1100 x 560 x 460 mm Dimensions(wooden box): 1200 x 800 x 600 mm

Electric chain hoist, crane, indoor crane, assembly crane, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Manufacturer: Balkancar, electric chain hoist with trolley -Load capacity: 125 kg -Main stroke 8 m/min -Delivery head: 12 m -Protection class: IP44 -Dimensions: 320/250/H660 mm -Weight: 31 kg

Electric chain hoist, crane, indoor crane, assembly crane, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Electric chain hoist with: chassis -Load capacity: 250 kg -Main stroke: 8 m/min -Fine stroke: 2.4 m/min -Hakenweg: 3.4 m -Dimensions: 385/500/H800 mm -Weight: approx. 40 kg

Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Balkancar, electric chain hoist with driven chassis -Crane chassis: Width 65 to 90 mm, see photos -Chain hoist: Type BO 91M -Load capacity: 125 kg -Main stroke: 8 m/min -Fine stroke: 2.4 m/min -Pumping height: 6.7 m -Travel speed: 20 m/min -Protection class: IP44 -Dimensions: 430/360/H630 mm -Weight: 40 kg

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Electric chain hoist without hand control -Load capacity: 250 kg -Main stroke: 8 m/min -Fine stroke: 2.4 m/min -Delivery height: 6.4 m -Dimensions: 260/380/H560mm -Weight: 23 kg

Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Balkancar, crane chassis type T 10232 with electric cable winch -Cable winch: Load capacity 0.5 t -Hook path: 12.0 m -Dimensions: see photos / technical drawing -Lifting speed: 8 m/min -Travel speed 20 m/min -Transport dimensions: 830/550/H860 mm -Weight: 142 kg

Crane hook Capacity: 0,7 tons Crane hook is fully functional, but not suitable for our requirements.

Crane hook Capacity: 80 tons Crane hook fully functional, but not suitable for our use.

2 pieces of crane bottles

weight max.: 100 t clamping width: 9500 mm height: 990 mm Width: 300 mm weight of the machine ca.: 5,6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 10000 kg weight: 10 kg dimensions: 700 x 300 x 300 mm with power supply and remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transport carriage IVG, built in 2020, craneable, load capacity 3to, unused. Transport carriage IVG, YOC 2020, unused, load capacity 3to, for the transport of turbine shafts or other objects, craneable, with reinforced attachment points for slipping or for safe transport with a forklift. Multiple presents. Dimensions approx. 2,400x750x500mm Dimensions approx. 2,400x750x500mm Dimensions approx. 2,000x750x500mm

DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Headliner (2x3m) The Manulift DCM-Pro has been developed for safe and fast load handling with one-handed operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit, which is rigidly connected to the load handling device, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane Chain Hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: laterally 3 meters and forward/backward 2 meters Steel beams: included in the offer Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Su ...

TECHNICAL SPECIFICATIONS Manufacturer: PFEIFER Seil- und Hebetechnik GmbH Description: Two-crane crossbeam, crane crossbeam, pipe crossbeam Type: 270092 Year of construction: 2015 Load capacity: 40,000 kg Weight: 3,150 kg Working length/gripping range: 1,920 - 7,250 mm SPECIFIC COMMENT - Variable anchor points - Ideal for transporting heavy concrete segments - Last inspection in accordance with BetrSichV 09/2023

Specifications: - Load capacity 8 t - Usable height 620 mm - Total height 780 mm - 4 pieces of load pick-up double hooks adjustable - Grid distance adjustment double hoes 100 mm - Truss beam IPE 240 - Total length approx. 2000 mm - Total width approx. 1050 mm - Weight approx. 350 kg

weight max.: 3 t clamping width: 3000 mm total power requirement: kW weight of the machine ca.: 0,110 t dimensions of the machine ca.: 3x0,3x0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: Favelle Favco Cranes PTY LTD Model: PC200 Mfg year: 2018 Condition: Unused. Crane Performance Data Main Hoist (Six Fall): 300.0 Tonne 0-5.0 m/min Auxillary Hoist (Two Fall): 30.0 Tonne 0-30 m/min Main Power Supply: 690 VAC / 3ph / 60 Hz (3 wires)

Tiger Sick Hook Traverse TA-SN-SZV-25-36 Load Capacity 2500Kg - For information see pictures -On hand

weight max.: 250 kg throat: 2.500 mm weight of the machine ca.: t height: 3000 mm Column-mounted slewing jib crane from DEMAG Load capacity 250kg Outreach: 2,500 mm Floor operation Console fixing plate 600 x 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: DEMAG : . : 20 Euro . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Tiger cassette lifting beam is available. Pick-up width: 2090mm, load capacity: 2500kg, machine dimensions X/Y/Z: approx. 800mm/700mm/650mm, weight: approx. 250kg. Documentation available. On-site inspection is possible.

Single-girder overhead crane Manufacturer: Demag Lifting capacity 8to Average track approx. 19.5m Lifting height min 6m With built-in crane scale / lifting weighing device. Hoist runs on the side of the beam so that the crane hook can be lifted to the lower edge of the beam. Crane system has already been dismantled. Optionally with approx. 2 x 50m crane rails.

lifting force: 5,0 t height: 585 mm width: 230 mm weight of the machine ca.: 25 kg Furnishing: - high precision according to the OIML R 76 standard - calibratable - Tare over the full range - works via direct display operation as well as via the remote control - Including remote control up to 10 m range and calibration function - bright and easy to read LED display with 30 mm high digits - Value can be held and frozen - The net weight can easily be determined using the tare function - Totalizing function for series weighings0 - automatic shutdown function - Overload warning on the display - Power supply via internal battery 6V / 10Ah, included in delivery, easy to swap and charge Model with 10 to. Lifting capacity also available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25153 Specifications: - Load capacity 12.5 t - Truss length 2900 mm - Truss height 350 mm - Truss beam consisting of 2 x UNP 200 - 2 x sling chains with ring + shekel L 1400 mm - Anchor points with spacing 1400 mm - left + right 4 pcs double load handling hooks each - Distance between the mounting hooks 300 mm each - Space requirement approx. L 2900 x H 350 x D 500 mm - Net weight approx. 500 kg

weight max. in kg: 10000 kg weight: 10 kg with power supply and remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3 t clamping width: 480 / 880 mm adjustment range - horizontal: 400 mm adjustment range - vertical: 600 mm total power requirement: - kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,60,41,1 m Shipping weight: 300 kg Packing: ca. 1,2 x 0,7 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double T beam / I 260 profile / crane rail 6 beams available, each approx. 10 meters long Price per carrier 500 Euro net Weight per carrier is approx. 500 kg I 260 Profiles with square solid material welded on it ( 4 x 3 cm ) Shipping available for an extra charge VAT can be declared

weight max.: 500 kg throat: 5.000 mm base plate: 0,7 x 0,7 m dimensions of the machine ca.: 5,14 x 0,70 x 4,75 m Crane DEMAG - DC-COM 1/1 H5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data : - Load capacity approx. 30 t - 2 crane mounting holes with through bolts 80 mm - Distance between the mounting bolts 100 mm - 2 stop extinguishers with a diameter of 65 mm - Distance between stop openings 235 mm - Stop height 800 mm - Overall height 990 mm - Truss beam HEM 360 - Truss dimensions approx. L 3150 x W 400 x H 480 mm - Weight approx. 450 kg

Offer 25429 Technical data : - Load capacity 1 t - Crane attachment eye in the middle - Suspension height approx. 500 mm - 2 adjustable stop eyes adjustable 1000 to 2500 mm - Adjustable distance 150 mm - Truss cross-section W 100 x H 100 mm - Overall dimensions approx. L 2650 x W 170 x H 500 mm - Weight approx. 70 kg

weight max.: 32 t clamping width: 4000 mm total power requirement: - kW weight of the machine ca.: 1 t dimensions of the machine ca.: 4 x 0,6 x 0,5 m Adjustable spreader beam for 32-tonne cranes - Central crane attachment point - Additional/alternative crane attachment points on the outer sides - 2 individually adjustable load attachment points Spreader beam length: 4000 mm Spreader beam width: 300 mm Weight: 980 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Knuckle Boom Crane Available – National Oilwell Varco (NOV) High-quality offshore lifting equipment ready for deployment: Make: National Oilwell Varco (NOV) Crane Type: Knuckle Boom Crane Model: OC2599KCE-15-25(18) Manufactured: 2011 Condition: Excellent Origin: Removed from FPSO vessel Safe Working Load (SWL) & Radius: • 1 Fall: 7.5T 25.4m • 2 Fall: 15T 24.9m ⚖️ Weight: 47.1T (excluding pedestal) Location: Europe Ideal for offshore, marine, and heavy lifting operations.