altendorf のこぎり 中古 販売のため

CIRCULAR SAW Mod ALTENDORF F45 second hand machine CE mark . with Use and Maintenance Booklet and Declaration of Conformity digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control Technical data : anodized aluminum carriage mm. 3000 max. blade mm.400 blade group inclinable at 45° saw blade self-braking power motor Hp 7.5 telescopic aluminum pole suspended "bridge" protection on the blade cutting width on the parallel rail mm.1300 n.02 additional aluminum frames fixed table dimensions mm.1200x750 blade rotation speed g / min.3000 / 4000/5000/6000 net weight kgs. 1000 Volt. 380/50

Altendorf WA6 Format circular saw new Format sliding table: 2600mm Engine power: 400V 4 KW (5.5 hp) Saw blade: 315mm swivel: 90°-45° Pre-scoring unit: with engine 0.37 KW (0.5 HP) For wood, plastic and non-ferrous metal G&AL-WA6-2600 ASSEMBLED CHECKED AND MEASURED! SPECIAL PRICE Format sliding table:also in 1600mm SPECIAL PRICE Accessories: Saw blade pendulum protection (upper protection) for saw blade 350mm

CIRCULAR SAW model ALTENDORF F45 with 2 axes by CNC second hand machine in excellent working condiiton CE mark . with Use and Maintenance Booklet and Declaration of Conformity 2 CNC controlled axes: 1st axis: blade lifting 2nd axis: blade inclination digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control electric movements of scoring unit , from the control panel technical data : anodized aluminum carriage mm. 3000 max.diam. blade ( with scoring blade ) mm.350 max.diam. blade ( without scoring blade ) mm. 450 blade rotation speed g/min.3000/4000/5000/6000 with scoring unit : Yes blade group inclinable at 45° cutting width on the parallel guide mm.1350 main saw blade . motor power 7.5 Hp scoring unit motor power Hp 1 machine equipment: aluminum telescopic rod n.01 DIGIT L digital disp ...

Operating voltage: 400 volts, power: 4 kW, speed: maximum 6,000 rpm, saw blade diameter maximum: 400 mm, work table with 2 T-slots width: 2500 mm, adjustable with depth stop: 0 - 800 mm, with suction device Errors excepted!

CATALOGUE NO. 7015 TECHNICAL SPECIFICATIONS - max diameter of the main disc with undercutter 350mm - max cutting height 100mm - main dial adjustable up / down - spindle diameter 30mm - spindle locking - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1030mm - with sidecar - with undercutting machine - max diameter of the scoring machine 100mm - spindle diameter 22mm - scoring motor 0,75kW - main motor 5,5kW - 4 types of rotation speeds 3000, 4000, 5000, 6000, rpm - diameter of extraction connection 120mm, 60mm - table top dimensions 1220x730mm - table top dimension with widening 1220x1150mm - shield cover - dimensions length / width / height 2880x2800x1100mm, - weight 961kg – German production – unpainted – used saw, very good condition Net price: 16900 PLN Net price: 3798 EUR depending on the price 4.45 EU ...

SPECIFICATIONS: Sliding table saw with 45° swiveling saw blade Diameter saw blade mm: 400 Diameter of the scorer mm: 120 Length of carriage mm: 3800 cutting width mm: 1600 Motor power KW: 5,5 Motor with brake Complete with: - 01 pneumatic presser - Digital control panel - Duplex continuous inclined cutter 0°-90°

Key data: 45 °, 2800 mm

Sliding Table Saw Main motor 5.5 KW Scoring saw

Sliding table saw Altendorf TRK 45 Year of construction: 1986 S/N 86-9-209 checked in our workshop for normal operating condition Carriage length: 1350 mm Height and swivel adjustment manually with handwheel Motor power: 5.5kW Cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, Blade diameter max mm: 450 ( without scoring machine ) with scoring Automatic engine brake Weight approx. 1100 kg Technical specification subject to change + 2 additional saw blades

Sawblade tiltable: 45 ° Length of the rolling table: 3000 mm cutting width: 1000 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table saw Altendorf TKR 45 (Ref. No. 183-2712) with spec. Stroke, digital display/operation max. saw blade diameter 450 mm Built in 1990 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Sliding table saw Altendorf Type F90 Machine No. 66-9-135 Sliding carriage length 2200 mm Cutting width 800 mm Motor power 5.5 kW Flat belt drive, 2 speeds Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge 500 mm Cutting height maximum 165 mm Maximum saw blade diameter with splitting wedge 400 mm Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm Saw blade cannot be swivelled Extraction connection diameter 120 mm + 80 mm Packaging dimensions approx. 2200 mm x 1400 mm x H 1500 mm Weight approx. 855 kg

F 45 EvoDrive: The new F 45 is a masterpiece in terms of technology and design. The one from the ground up on newly designed machine stands exceeds all previous values in the points torsional stiffness and low vibration. The smooth front and the legroom on the ground let you get closer to the sliding table saw and stand on the workpiece. The design-adapted, legendary smooth-running double trolleys is still the measure of all Things when it comes to precision cuts and zero maintenance. In addition comes the control at eye level, with which you can adjust the height and swivel of the saw blade plus, depending on the choice of the control package, the speed and more functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: With this sliding table saw characterful design meets timeless aesthetics. 7" touchscreen with separate keyboard Au ...

Swivelling sliding table saw Altendorf F45 with ELMO IV-plus package with 2-axis scorer, 3m table and Control-Plus control Sliding table length 3000mm Saw blade swivel from 0 to 45 degrees 3000, 4000, 5000 and 6000 rpm speeds with electric speed display Drive motor 5.5kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC-controlled Cutting of chain dimensions and grooves on the rip fence and length stop Cutting width correction at the rip fence and length stop when the saw blade is swivelled 600 editing programs Calculator function with result transfer to the corresponding axis. Tool management Saw blade diameter up to 450mm Cutting height max. 150mm Cutting width up to 1040mm electrically adjustable Swivel angle and height adjustment electrically adjustable Cut-to-length stop ruler electrically adjustable up to approx. 3210mm ...

Sliding table saw Altendorf WA 80 Digital display angle and cutting height Motor power 5.5 kW Scoring 0.75 kW Carriage length 3200 mm Saw blade diameter max. 500 mm, can be lowered below table height Cutting height max. 125 mm, at 45° max. 87 mm Cutting width at the rip fence 1350 mm Height adjustment electromotive Swivel angle adjustment electromotive 0 – 45° Angle stop, cutting to length up to 3200 mm Table extension 840 mm Machine weight approx. 1100 kg Work table height 910 mm Top condition

Sliding table saw Altendorf WA 80 Digital display angle and cutting height Motor power 5.5 kW Scoring 0.75 kW Carriage length 3200 mm Saw blade diameter max. 500 mm, can be lowered below table height Cutting height max. 125 mm, at 45° max. 87 mm Cutting width at the rip fence 1350 mm Height adjustment electromotive Swivel angle adjustment electromotive 0 – 45° Angle stop, cutting to length up to 3200 mm Table extension 840 mm Machine weight approx. 1100 kg Work table height 910 mm Top condition

Key data: 45 °, 1350 mm, 850 mm

Altendorf TKR45 Brand: Altendorf Type: TKR45 M-No.: 79-11-204 Year of Make: 1979 Cutting length 1350mm Surface-mounted table Yes Cutting width 850mm Cutting height (max) 155mm Saw blade (max): ø450 Main saw shaft ø30 Saw blade inclination: 0-45° Motor 5.5 kW Speed 3000/4000/5000 omw/m Weight 910KG

Sliding table length: 2800mm, Cutting width: 1000mm, Saw blade tilting: 45°, Saw blade diameter min./max.: 250mm/450mm, Motor power: 5.5kW, Weight: approx. 1250kg. An on-site inspection is possible.

Length of the rolling table: ca. 2280 mm Saw blade diameter: ca. 400 mm weight: ca. 900 kg Parallel stop: Stop sliding table: 1550 mm with mitre rail incl. side stop extension to 1000 mm Star delta circuit has been renewed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sliding table saw Altendorf Type: F 90 Machine No. 81-12-195 Built in 1981 Sliding carriage length 2500 mm Motor power 4 kW Extraction hood from above Table extension and Table extension Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge 500 mm Cutting height maximum 165 mm Maximum saw blade diameter with splitting wedge 400 mm Saw blade speeds 3000/4000/5000/6000 rpm. Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm Saw blade cannot be swivelled Extraction connection diameter 120 mm + 80 mm Weight approx. 800 kg with pallet

Length of the rolling table: ca. mm Saw blade diameter: ca. 400 mm weight: ca. 900 kg Parallel stop: Stop sliding table: 1460 mm with stop extension to 2840 mm Star delta circuit has been renewed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter: 450mm, Cutting height: 150mm, Bore: 30mm, Swivel: 45°, Cutting width: 1000mm, Machine dimensions X/Y/Z: approx. 3300mm/2000mm/1600mm, Weight: approx. 1200kg. An on-site inspection is possible.

Panel saw Type: F45 EvoDrive Manufacturer: Altendorf Year: 2019 Control: Evo Drive Sliding table 3200 mm CNC controlled parallel ruler, electrically adjustable 0 - 1300 mm Miter ruler extendable up to 3200 mm Main motor power 5.5 kW / speed 3000/4000/5000 rpm Max. blade Ø: 500 mm (without pre-cut) Max. cutting length: 3200 mm Automatic calculations for oblique and bevel cuts Simple, intuitive, with quick access to functions Machine equipment: 2-axis pre-cutting unit (0.75 kW motor) Increase in main motor power to 5.5 kW CNC parallel ruler - cutting width 1300 mm Extension of sliding table to 3200 mm CLIPBOARD cutting plan holder Angle ruler - bevel cuts up to 49° Start/Stop switch directly on the carriage Machine in good condition, fully functional Find more here - / Contact us at -

Sawblade tiltable: 45 ° Length of the rolling table: 3.200 mm cutting width: 1.250 mm Motor output: 5,5 kW Saw blade diameter: 350 mm Scoring unit: 0,75 kW Altendorf F45 sliding table saw for precise rip, cross, and miter cuts in solid wood, panel materials, and coated materials. The machine enables accurate and repeatable cuts thanks to its smooth-running sliding table, motorized adjustment, scoring device, and sturdy cast iron construction. Ideal for carpentry, furniture making, and interior design. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sliding table length: 1500 mm; cutting width at the fence: 700 mm; cutting width at the cross cut: 2200 mm; cutting depth: 100 mm; scoring unit: no; adjustment sawblade height: manuell / Kurbel; adjustment sawblade tilting: manuell / Kurbel; adjustment fence: manuell; read out sawblade tilting: Digital; read out cutting height: -; read out fence: Scala; read out crosscut: Scala; saw blade diameter: 315 mm; number of speeds: 1; motorpower: 4 kW; motor brake: ja - automatisch; suction connection: 80 mm und 120 mm; machine length: 3000 mm; machine width: 1700 mm; weight: 900 kg;

Key data: 45 °, 2800 mm, 800 mm

Sliding Table Saw Table Saw Circular Saw Carpenter Saw Altendorf Type: F45 Year: 1978 Sliding table length: 280 cm Trimming width/ rip fence approx.: 80 cm Parallelogram Guard with Top Extraction Hood Boom table with cut-to-length stop Miter stop Motor power: 5.5 KW Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. the indicated shipping costs are an approximate price, depending on the distance and unloading option, they may vary. Please inquire. The item offered is offered with differential taxation. The sales price shown is the gross final amount. An invoice with VAT will not be issued.  ...

Carriage length: 2800 mm; Cutting width at the width stop: 1250 mm; Cutting width at cut-to-length fence: 2800 mm; Cut depth: 145; Scorer: no; Height adjustment saw blade: manual / hydraulic; Swivel adjustment saw blade: manual / hydraulic; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: Speeds: 4; Motor power: 5.5 kW; Engine brake: yes; Extraction connection: 80 mm and 120 mm; Machine length: 3000 mm; Machine width: 1700 mm;

Carriage length: 3000 mm; Cutting width at the width stop: 1000 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 150 mm; Vorritzer: yes; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: manual; Display Saw Blade Angle: Digital Display; Display Cutting Height: Digital Display; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: max. 450 mm; Speeds: 4000rpm; Motor power: 5.5kW; Extraction connection: 120 mm and 80 mm; Machine length: 3200 mm; Machine width: 2000 mm;

Carriage length: 3200 mm; Cutting width at the width stop: 1300 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 145 mm; Vorritzer: yes; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: electric; Adjustment of cut-to-length stop: manual; Display Saw Blade Angle: Digital Display; Display cutting height: -; Display Width Stroke: Digital Display; Display cutting ruler: Scala; Saw blade diameter: 450mm; Speeds: 4; Motor power: 5.5kW; Suction port: 80 and 120mm; Machine length: 4000mm;

Carriage length: 2250 mm; Cutting width at the width stop: 1040 mm; Cutting width at cut-to-length fence: 2900 mm; Cut depth: 154 mm; Vorritzer: yes; Height adjustment saw blade: electric / position control; Swivel adjustment saw blade: electric / position control; Adjustment width stop: electric / position control; Adjustment of cut-to-length stop: manual; Display Saw Blade Angle: Digital Display; Display Cutting Height: Digital Display; Display Width Stroke: Digital Display; Display cutting ruler: digital display; Cut-to-length ruler with mitre function: yes;

Carriage length: 3400 mm; Cutting width at the width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 170 mm; Vorritzer: yes; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: manual; Adjustment of cut-to-length stop: manual; Display Saw Blade Angle: Digital Display; Display Cutting Height: Digital Display; Display Width Stroke: Digital Display; Display cutting ruler: Scala; Saw blade diameter: 500mm; Speeds: 4; Motor power: 5.5kW; Suction port: 80 and 120mm; Machine length:

Carriage length: 3000 mm; Cutting width at the width stop: 1300 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 154 mm; Vorritzer: yes; Height adjustment saw blade: electric / position control; Swivel adjustment saw blade: electric / position control; Adjustment width stop: electric / position control; Adjustment of cut-to-length stop: manual; Display Saw Blade Angle: Digital Display; Display Cutting Height: Digital Display; Display Width Stroke: Digital Display; Display cutting ruler: digital display; Cut-to-length ruler with mitre function: yes;

Carriage length: 3000 mm; Cutting width at the width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 170 mm; Scorer: no; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: manual; Adjustment of cut-to-length stop: manual; Display Saw Blade Angle: Digital Display; Display Cutting Height: Digital Display; Display Width Stroke: Digital Display; Display cutting ruler: Scala; Saw blade diameter: 500mm; Speeds: 4; Motor power: 7.5kW; Suction port: 80 and 120mm; Machine length:

Machine to the dowel, drill and saw the company EKM spezialmaschinen connection value: 4,4 kW 1 pneum. Workpiece clamping system 1 drill head with 5 spindles in row spacing 25 mm / 40 mm / 40 mm / 25 mm 4 piece glue - and plugs Tools 4 piece adjustable on width 220 mm Under table saw Control PLC Siemens Simatic Fully functional replacement for PLC program on CD,. Shipping dimensions: L 1500 mm x W 1500 mm x H 2400 mm Machine weight: 1000 kg Condition good, fully functional

C.T.S. Gemini 8002 with simens Simatic and bar feeder The C.T.S. Gemini 802 is an industrial machine designed for precision cutting and processing of materials such as metal or plastic. Manufactured by C.T.S. (Cutting Technology Systems), the Gemini 802 model is known for its efficiency and accuracy in various industrial applications. Key Features: - Cutting Capacity: The Gemini 802 is equipped to handle a range of material sizes, providing versatility in cutting operations. - Automation: Incorporates automated features to enhance productivity and reduce manual intervention. - Precision: Designed to deliver high-precision cuts, ensuring minimal material waste and adherence to specified dimensions. Find more here - / Contact us at -

Manufacturer: Koch, Type: SBD - 320 , Year: 1994, Control: Programm, Working widht max mm: 1500, Arbeitstiefe max mm: 320, Working thickness max mm: 10 - 32, Saw diameter mm: 350, Work piece transport: Kette, Drilling support horizontal: 2, Drill gearings: 7, Drill gearings: 7, Drill support from top: 5, Drill gearings: 7, Belt conveyor: yes, Gluing: yes, Re-charging: no, Dovel insertion: yes, Raster 32 mm: yes, Horizontal drilling from both sides: yes, Wight approx. kg: 6000, Year :1994

Manufacturer: Koch, Type: Compact, Year: 1991, Control: Programm, Working widht max mm: 150-2500, Arbeitstiefe max mm: 200, Working thickness max mm: 80, Schwenkbereich Grad in X: +30-90, Dovel units: 3, Dovel diameter mm: 10-12, Drill gearings: 2, Drill gearings: 2, Drill gearings: 2, Drill spindles per support: 5, Gluing: yes, Dovel insertion: yes, Raster 32 mm: yes, Compressed air bar: 6, Wight approx. kg: 3000, Year :1991

I.T.E.C GmbH Cold circular saw Find more here - / Contact us at -

Manufacturer: FORMAT-4 Model: Kappa V60 Type of Machine : vertical panel saw Condition: Used. In operation for approx. 6 months Max cutting length: 4200 mm Max cutting height: 2200 mm Max horizontal cut height: 2080 mm Max cutting depth: 60 mm Motor power: 4 kW Saw blade diameter: 250 mm Speed: 5300 rpm Weight: 910 kg Installation dimensions (LxWxH): 5600 x 1700 x 3000 mm Find more here - / Contact us at -