Good, working condition | Control: Multipulse 64 | Photo details: INGERSOLL GANTRY 400 wire EDM / machining system. Multipulse 64 control visible. Machine plate: serial number 574347, year of manufacture 2003, type Gantry 400 HSJ, made in Germany. Electrical data: 400 V 3-phase, 50 Hz, control voltage 24 V DC, power input 14.8 A, maximum fuse 25 A. Operator, training and programming manuals are present. Auction-ID: A1-51094-3
Machine is sold expressly with defects! * Service brake must be checked *Bowden cable bonnet defective *Engine wiring harness defective Year of Make: 2013 Operating hours approx.: 8370 h Equipment: . Individual operating permit . Photo Weidemann hydr. . Lighting according to StVZO . Cab Comfort . Tyres: 12.5-20 MPT ET0 . Turbo diesel engine 74.5 kW . Adjustable steering column Auction-ID: A7-51138-9
Mobile blue roll dispenser with integrated serrated cutting bar and a white roll of protective paper/foam material. Visible label indicates approximately 241.87 mm width; exact material and remaining roll length are unknown. Auction-ID: A1-51094-57
ControDECKEL MAHO DMU 50T Machine Type / Model: Dmu 50t 3 + 2 axis. Year of Manufacture: 2000. Total Power Requirement: 17 kVA. Current Ratings: 25 A (jn max) and 35 A. Main Supply Voltage: 400 V, 50 Hz (3-phase). Secondary / Control Voltages: 230 V (AC) and 24 V (DC). Technical: X-axis Travel: 500 mm Y-axis Travel: 400 mm Z-axis Travel: 400 mm Table Type: Swivel rotary table (3 + 2 axis configuration) Table Size (Clamping area): Approx. 700 mm x 500 mm B-axis (Swivel/Tilt range): -10° to +95° C-axis (Rotation range): 360° Spindle Speed: Standard max. 9,000 RPM Tool Taper: SK40 Tool Magazine Capacity: 16 positions Rapid Traverse: 12 m/min l: Heiden Auction-ID: A1-51094-13
Excelent like new, working condition | Control: Siemens | Photo details: DECKEL MAHO DMC 635 V vertical machining centre. Siemens 840D / ERGOline control with ShopMill visible. Original operating, mechanical and electrical documentation/manuals are present. Machine enclosure, worktable, spindle and Siemens SINAMICS electrical cabinet shown in the photos. Auction-ID: A1-51094-2
Large assortment of used CNC tool holders, collet chucks, drill chucks, arbors, collets, adapters and clamping accessories stored in a mobile SUSTA tool trolley. Visible signs of use and discoloration. Auction-ID: A1-51094-30
Good, working condition | Control: Heiden TNC | Photo details: Metaflux Spray 70-02 label visible; warning to use only balanced tools; maximum speed indicated as 18,000 rpm (G 6.3) and 24,000 rpm (G 2.5). Internal tool/spindle setting table visible. Auction-ID: A1-51094-1
Red mobile steel dispenser with a large rotating reel, central spindle, adjustment mechanism and upper storage tray. Intended for unwinding or handling cable, hose or similar roll material; exact application is unconfirmed. Used condition. Auction-ID: A1-51094-60
Compact JPC KV12 crawler excavator with diesel engine, dozer blade, trench bucket and additional hydraulics on the excavator arm. The auxiliary hydraulics are operated via a foot pedal and allow the connection of suitable hydraulic attachments. Technical data Manufacturer: JPC Model No.: KV12 Type: Mini Excavator / Crawler Excavator Year of manufacture according to nameplate: 2025.12 Operating weight: approx. 1,070 kg Engine: HPR Diesel Power: 12 hp / approx. 8.8 kW Bucket capacity: approx. 0.025 m³ Travel speed: max. 5 km/h Dimensions L×W×H: approx. 2,500×950×2,200 mm Features & Features Rubber track chassis Dozer blade / dozer blade front Mounted trench shovel Additional hydraulics on the excavator arm Operation of the auxiliary hydraulics by foot pedal Lifting or supporting via dozer blade and excavator boom possible Open driver's platform with canopy Work light on the b ...
Powerful professional wood chipper for forestry operations, contractors and professional wood chip production. The machine has been extensively overhauled. Numerous components relevant to wear and drive have been renewed. Extensive overhaul: • Machine sandblasted, primed and two-tone repainted • Counter blade incl. carrier plate and counter knife comb renewed (multi-part version) • Pull-in chain conveyor including drive, deflection shaft and bearing renewed • All bearings of the machine renewed • Power belt/belt package renewed • Knife holder and counter-knife plates incl. screws and blades renewed and adjusted • Cross screw conveyors incl. drive chain renewed • Lighting system renewed • Changed all filters and oils Technical data: • Manufacturer: Heizohack / Heizomat • Model: HM 10-500 KF • Year of construction: 2007 • Device number: 105007 • Operating hour ...
• Manufacturer: CASE Construction • Model: CX50B ZTS • Machine Type: Hydraulic Excavator / Crawler Excavator • Year of construction: 2014 • Serial number / PIN: NSUC50BCNELN03656 • Operating weight: approx. 5 tons • Operating hours read: 5,275 hours • Engine: Yanmar Diesel 4TNV88-XYB • Engine power: 31.5 kW at 2,400 rpm. • Engine number: Q3407 • Tilt: Rädlinger JR-Tilt 90 • Hydraulic quick coupler: Lehnhoff HS 03 • Swing boom • Dozer blade • Hydraulic piping for hammer operation • Hydraulic piping for grabs • Proportional control on the right joystick • Front and rear working lights on the cab • Rubber track chassis • Enclosed driver's cab • Inspections every 500 hours according to the manufacturer's maintenance schedule • Signs of wear due to age and durability Auction-ID: A1-51207-6120
General information • Brand: Kubota • Type: U55-4 (Chinese import) • Year of manufacture: unknown (probably 2017) • Serial number: 85007 • Engine brand: Kubota • Engine number: CA1822 • Engine power: approx. 33.8 kW (46 hp) • Number of cylinders: 4 • Fuel: Diesel Technical data • Operating weight: approx. 5,500 kg • Net weight: approx. 5,200 kg • Operating hours according to the speedometer: approx. 800 h (probably not real, reset) • CE certificate: available • Cabin: yes, closed cabin • Caterpillars: steel chains with rubber plates (protects the ground) • Engine: recently completely overhauled, runs perfectly (documented) • Boom length: approx. 2,500 mm • Max. working range: approx. 5,500 mm • Max. digging depth: approx. 3,600 mm Equipment / Accessories • 1 large shovel • 1 smaller shovel • 1 digging bucket • Pliers Condition • Mach ...
1.500 €
