cutting diameter: 185 mm saw band length: 2.085 x 20 x 0,90 mm table height: 915 mm band speed: 35/70 m/min capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150 mm capacity 90 degrees: flat: 220 x 150 mm connected load frequency: 400 V total power requirement: 0,8 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 220 mm saw band length: 2450 x 27 x 0,9 mm table height: 915 mm band speed: 35 + 70 m/min connected load frequency: 400 V capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use. ...
砂带尺寸：150x2000 毫米 ：1400/2800 U/min 带速：16.5/33 m/s 总功率要求：2.6/3.37 kW 重量：190 公斤 标准特性： - 无振动运行平稳 - 工作高度可调 - S1 电机具有 100% 占空比 - 可 进行表面和接触磨削 - 用于表面研磨 的可拆卸保护罩 - 双吸 连接件 - 按照 CE 标准 制
砂带尺寸：150x2000 毫米 ：1400/2800 U/min 带速：16,5 / 33 m/s 总功率要求：3,4/4,5 kW 重量：190 公斤 可以最大地研磨管道： 90 度时最大 150 毫米 60 度时 127 毫米 最大 45 度时 100 毫米 30 度时最大 70 毫米
砂轮尺寸：200 x 25 mm 轴径：20 mm 车削速度：2.800 U/min 锯带速度：20 m/s 总功率要求：0.75 kW 机器重量：17 kg
切割直径 220 mm 锯片长度：2450 x 27 x 0.9 mm 颜色：灰色 总功率要求：1.2 kW 锯带宽度： 0.9 mm 切割速度：35 + 70 m/min 90 度切割范围：约 220 mm 90 度切割范围：方形 220 mm 90 度切割区域：平面 230 x 185 mm 60 度切割范围：方形 90 x 90 mm 45 度切割范围：约 150 mm 45 度切割面积：方形 150 x 210 mm 机器编号4777230
新机
capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 mm : 165 x 310 mm saw band length: 2.725 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1 kW weight of the machine ca.: 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 400 x 32 mm capacity 90 degrees: round: 145 mm capacity 90 degrees: square: 130 x130 mm capacity 90 degrees: flat: 300 x 80 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 115 x 115 mm capacity 45 degrees: flat: 250 x 60 mm total power requirement: 1,8 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 105 mm saw band length: 1140 x 13 x 0,65 mm cutting width: 100/100x105 mm capacity 60 degrees: round: mm capacity 45 degrees: flat: 55 x 55 mm capacity 45 degrees: round: 60 mm total power requirement: 0,18 kW weight of the machine ca.: 18 kg dimensions of the machine ca.: ca.400 x 300 x 350 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...
: 32 bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 105-2.650 UpM total power requirement: 0,75 kW Overall size: 750x450x1745 mm weight of the machine ca.: 192 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 400 V sawband speed: 35 + 70 m/min. : 230 mm total power requirement: 0,75 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTec ...
capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm Motor output: 1,2 kW : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 36 + 72 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210x210 mm capacity 90 degrees: flat: 230x185 mm : 150 mm : 150x150 mm : 150x210 mm : 90 mm : 90x90 mm : 90x100 mm dimensions of saw-band: 2450x27x0,9 mm cutting speed: 35/70 m/min work height max.: 915 mm : 265 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 1550x870x1740 mm Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position. Standard features: - Hydraulic cylinder - emulsion pump - Eccentric tensioner - Underframe - saw blade - 400V plug 16A The data for this ad was created with ModulMWS - the software solution of LogoTec ...
90 度切割范围： 圆形： 250 mm 切割范围 90 度： 正方形： 210 mm 切割面积 90 度： 矩形： 290 x 210 mm 锯带长度： 2，965 x 27 x 0.9 mm 工作台高度： 940 mm 皮带速度： 35 / 70 m/min 总功率要求： kW 机器重量 约： 0.35 t 动作弹簧 2022！！ Z252/DG具有以下设备： - 液压缸， - 乳化泵， - 偏心张紧器， - 底架， - 带锯， - 400V插头 -16A-机器 交付时已完全组装好，可立即使用。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
皮带速度：33 m/s 砂光带尺寸：75 x 2000 mm 总功率要求：3 kW 机器重量约：75 kg 速度：2800 rpm 标准设备： - 可拆卸除尘器箱 - 皮带微调 - 砂光带 - 护目镜 - 电机保护开关 - 操作说明 - 磨削支撑台 - 工作高度调节 - 表面研磨支架 ! !为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
: 32 bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 150-2.500 UpM Power requirement: 16 A total power requirement: 1,5 kW Overall size: 750x450x1745 mm weight of the machine ca.: 187 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Standard features: - right and left miter - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
砂光带尺寸：75 x 2000 mm 皮带速度：33 m/sec 机器重量约：90 kg 电机功率：4 kW 速度：2800 rpm 设备： - 无振动平稳运行 - 工作高度可调 - S1 电机具有 100% 占空比 - 表面和接触回路- 表面研磨保护罩可拆卸 - 双吸 连接喷嘴- 根据 CE 标准制造 ! !为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 16,5/33 m/sec engine output: 2,6/3,37 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
砂光带尺寸：150 x 2000 mm 皮带速度：16.5/33 m/sec 电机功率：3.4/4.5 kW 电机转速：1400/2800 rpm 机器重量约：105 kg 设备： - 无振动平稳 运行- 工作高度可调 - S1 电机具有 100% 占空比 - 表面和接触回路- 表面 研磨保护罩可拆卸 - 双吸 连接喷嘴- 符合 CE 标准 ! !为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
砂光带宽度：150 mm 砂带长度：2000 mm 皮带速度：33 m/sec 电机功率：3 kW 电机速度：2800 rpm 机器重量约：105 kg 设备： - 无振动平稳运行 - 工作高度可调 - S1 电机具有 100% 占空比 - 表面和接触磨削是可能的 - 表面研磨保护盖可拆卸 - 用于双吸 的连接喷嘴- 根据 CE 标准制造 ! !为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Standard features: - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
输送带宽度：150 mm 输送带长度：2000 毫米 输送带速度：16.5/33 米/秒 总功率要求：2.6/3.37 千瓦 速度：1400/2800 rpm 机器重量约：95 kg 设备/配件： - 可拆卸集尘器箱 - 皮带调节 微调- 砂光带 - 护眼 - 电机保护开关 - 操作说明 - 研磨支撑台 - 工作高度调整 - 表面研磨层 ! !为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 20 - 85 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Motor output: 1,2 kW Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 23 thread capacity: M10 bore stroke: 90 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 150-1.250/350-3.000 UpM total power requirement: 0,75 kW Overall size: 735x470x1080 mm weight of the machine ca.: 106 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 230 V sawband speed: 30-75 m/min. : 230 mm total power requirement: 2,35 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech ...
: 20 bore stroke: 80 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 210-2.500 UpM total power requirement: 0,38 kW Overall size: 620x470x1050 mm weight of the machine ca.: 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
砂光带尺寸：150 x 2000 mm 皮带速度：33 m/sec 机器重量约：105 kg 电机功率：4 kW 速度：2800 rpm 设备： - 无振动平稳运行 - 工作高度可调 - S1 电机具有 100% 占空比 - 表面和接触回路可能 - 表面研磨保护盖可拆卸 - 用于双吸 的连接喷嘴- 根据 CE 标准制造 ! !为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
