Inv. Num. ： 8662 型号：Rondamat 960 监制：威尼格 生成时间：2000 年 参数： 速度：1500-3000 1/min 砂轮直径：150/225 mm 砂轮钻孔：60 mm
Inv. Num. ： 8653 类型：水垫 23 监制：威尼格 生成时间：2000 年 参数： 最大垂直主轴转速：6000 1/min 主轴数量：8 主轴直径：50 mm 机器高度： 1740 mm 机器长度： 3900 mm 机器宽度： 1900 mm 机器重量：4600公
Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm - Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5 -20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed ...
中间输送带 / 输送带 LTB 250-3500型，序列号81005,1997年制造 长度：3500毫米 宽度：250毫米 高度：820-1000毫米 进给速率20米/分钟。 带滑板3000毫米 2个气泡。玻璃珠抛射器 状况：技术和光学上功能性都非常良好 交付：EXW 交付时间：临时安排 观影方式：安
Second-hand automatic planing and grooving machine, part of a Weinig Hydromat 2000 pre-planing line, with feed mechanism (tilting destacking). The machine has already been dismantled and is ready for loading. The images contain AI-generated sample images for illustrative purposes. The illustration may contain errors. Technical data: Spindles: 5 Spindle 1: Bottom / 11 kW / 50 mm / 6,000 rpm Spindle 2: Left / 11 kW / 50 mm / 6,000 rpm / Jointer Spindle 3: Top / 18.5 kW / 50 mm / 6,000 rpm / Jointer Spindle 4: Bottom / 11 kW / 50 mm / 6,000 rpm / Jointer Spindle 5: Right / 11 kW / 50 mm / 6,000 rpm Working width: 175 mm Working height: 80 mm Feed: 15 kW / 100 m/min Control: CNC memory system Max. workpiece length: ~ 6,000 mm Condition: Gebraucht Location: Prag, Tschechien
Second-hand Weinig Profimat 23 E automatic planing and moulding machine for four-sided planing and profiling of timber, with a long dressing table. Technical data: Spindle 1: Bottom / 4 kW / 40 mm Spindle 2: Right / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 5.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Spindles: 5 Working width: 230 mm Working height: 120 mm Feed: 2.2 kW Planing table length: 2,500 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Second-hand Weinig high-performance planer, model Hydromat 17BL, for professional woodworking. The machine has ten spindles and is suitable for industrial planing and profiling of timber. With a working width of 170 mm, a working height of 120 mm and a feed rate of 60 m/min, it is designed for high-performance continuous processing. Technical data: Spindles: 10 Spindle 1: Bottom / 7.5 kW / 50 mm Spindle 2: Right / 7.5 kW / 50 mm Spindle 3: Left / 7.5 kW / 50 mm Spindle 4: Right / 7.5 kW / 50 mm Spindle 5: Left / 7.5 kW / 50 mm Spindle 6: Top / 11 kW / 50 mm Spindle 7: Bottom / 7.5 kW / 50 mm Spindle 8: Top / 7.5 kW / 50 mm Spindle 9: Bottom / 7.5 kW / 50 mm Spindle 10: Universal / 7.5 kW / 50 mm Working width: 170 mm Working height: 120 mm Feed rate: 60 m/min Feed motor: 15 kW Table: Hard-chromed Condition: Gebraucht Location: Tauberbischofsheim, Germany
Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and marking defects (using fluorescent chalk). The separate measuring station records the lengths and marked defects. Technical data: Cutting height: 260 mm Saw blade diameter: 500 mm Input length: 400 6,300 mm Input thickness: 12 80 mm Feed rate: max. 250 m/min Cycle time: approx. 1 sec Saw motor: 7.5 kW Marking station: 5,000 mm Outfeed conveyor: 7.5 m with 1 pneumatic ejector Control system: OptiCom Pro Condition: Gebraucht Location: Tauberbischofsheim, Germany
Key data: 4 , 230 mm, 150 mm
四面刨床魏尼希 类型：Q 22 Quattromat（四重装） 制造年份：1990年 刨削宽度：230毫米 滑行高度 150 毫米 梳妆台长度 1960毫米 4个井道： 1 底部4千瓦 右侧为2，且 剩下3台，由1台5.5千瓦电机驱动 4台功率超过5.5千瓦 进给速度为6 - 22米/分钟。 供电开心板，供电电机2.2千瓦 润滑油泵手册 带隔音罩 包括刨床头 两件长230毫米 两件长150毫米 含基结构重量1,620公斤 尺寸 3350毫米 x 1450毫米 x 高1600毫米
The Weinig Unimat 23 SP automatic planing and splitting machine is designed for the precise planing or pre-planing and splitting of solid timber in a single operation. With four spindles, a working width of 230 mm and a working height of 120 mm, the machine is suitable for efficient processing in the timber industry. Technical data: Spindles: 4 Working width: 230 mm Working height: 120 mm Spindle 1: Bottom (5.5 kW) Spindle 2: Top (5.5 kW) Spindle 3: Right (11 kW) Spindle 4: Left (11 kW) Feed: 5.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany
Weinig Unimat 23E automatic planing and profiling machine for four-sided planing and profiling of timber, featuring a mobile spindle for automatic adjustment and a grooving bed (optionally available without the grooving bed) for short and curved workpieces, as well as a long dressing table. Technical data: Optional: Conversion to a conventional smooth table, on request. Spindles: 5 Spindle 1: Bottom / 40 mm / 5.5 kW Spindle 2: Right / 40 mm / 7.5 kW Spindle 3: Left / 40 mm / Shared motor with spindle 2 Spindle 4: Top / 40 mm / 7.5 kW Spindle 5: Bottom / 40 mm / 5.5 kW Working width: 230 mm Working height: 160 mm Feed: 4 kW / 524 m/min Condition: Gebraucht Location: Tauberbischofsheim, Germany
Key data: 7 , 170 mm, 140 mm
四面刨床魏尼希 类型：U 17 A 制造年份：1979年 滑行宽度 170 毫米 滑行高度 140 毫米 梳妆台，长1960毫米 7波： 1. 最低4千瓦功率 2. 右功率3千瓦 3. 左侧4千瓦 4. 右4千瓦 5. 顶级5.5千瓦功率 6. 最低4千瓦 7. 通用4千瓦 最大进给速度：18.5 m/min。 配备手动蜡光泵 功能良好的状态
For profiling and edge-milling windows doors individual components and similar items with all-round profiles, including return feed Units: Technical data: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Condition: Gebraucht Location: Tauberbischofsheim, Germany
