Гнучкі машини для труб LANG EL-HY168F CNC

металообробні станки / обробка листового металу / Гнучкі машини для труб

Виробник: LANG

Модель:EL-HY168F CNC

Тип техніки: Гнучкі машини для труб

Номер позиції: 167413946

Кількість: 1

Дата: 23.07.2025

Рік випуску: 1994

Місцезнаходження: Eilenburg

Ціна:


Машина в наявності:Так

Seller-item-No.:2084-1062

tube diameter: 168,3 x 11 mm
tube: 6000 mm
bending radius max.: 700 mm
Control: Siemens 840 D
bending radius min.: 80 mm
bending angle max. +/-: 190 °
connected load: 400 V / 50 HZ /85A
Dimensions (L/W/H): 11,9 x 2,7 x 2,45 m
weight of the machine ca.: 33 t
- CNC control system MMI Multicontrol 2000
- NCU control system Siemens 840D
- SPS PLC Siemens Simatic S7
- electr. connected load 400V / 50 Hz / 85 A

The machine is fully automatic and equipped with a tool changer.

The following tools are available:

Pipe Ø 48.3 mm, Radius 105 mm
Pipe Ø 60.3 mm, Radius 120 mm
Pipe Ø 63.5 mm, Radius 150 mm
Pipe Ø 76.1 mm, Radius 190 mm
Pipe Ø 88.9 mm, Radius 222 mm
Pipe Ø 114.3 mm, Radius 285 mm
Pipe Ø 139.7 mm, Radius 350 mm
Pipe Ø 141.3 mm, Radius 700 mm
Pipe Ø 168.3 mm, Radius 420 mm

There were a few mandrels that had a marking engraved directly on them.

These had the following specifications:

88.9 x 8 mm, 88.9 x 4.5 mm, 114.3 x 8.8 mm, 139.7 x 8.8 Z5728996 mm,
168.3 x 12.5 mm, 168.3 x 8.8 mm

The following outer diameters of the mandrels were measured:

23.2 mm, 32.3 mm, 37.1 mm, 41.5 mm, 59.3 mm, 70.3 mm,
77.7 mm, 80.9 mm, 88.7 mm, 93.2 mm, 94.7 mm, 103.0 mm,
112.8 mm, 118.8 mm, 128.9 mm, 138.5 mm, 147.2 mm, 153.6 mm

The accessory package has a value of around €150,000



The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Розповісти про цю машину на Facebook:

Запит

Ви дилер техніки?

Будь ласка, виберіть опціонально

Відправити запит пошуку?

Копію для вас?

Save input data

tube diameter: 168,3 x 11 mm
tube: 6000 mm
bending radius max.: 700 mm
Control: Siemens 840 D
bending radius min.: 80 mm
bending angle max. +/-: 190 °
connected load: 400 V / 50 HZ /85A
Dimensions (L/W/H): 11,9 x 2,7 x 2,45 m
weight of the machine ca.: 33 t
- CNC control system MMI Multicontrol 2000
- NCU control system Siemens 840D
- SPS PLC Siemens Simatic S7
- electr. connected load 400V / 50 Hz / 85 A

The machine is fully automatic and equipped with a tool changer.

The following tools are available:

Pipe Ø 48.3 mm, Radius 105 mm
Pipe Ø 60.3 mm, Radius 120 mm
Pipe Ø 63.5 mm, Radius 150 mm
Pipe Ø 76.1 mm, Radius 190 mm
Pipe Ø 88.9 mm, Radius 222 mm
Pipe Ø 114.3 mm, Radius 285 mm
Pipe Ø 139.7 mm, Radius 350 mm
Pipe Ø 141.3 mm, Radius 700 mm
Pipe Ø 168.3 mm, Radius 420 mm

There were a few mandrels that had a marking engraved directly on them.

These had the following specifications:

88.9 x 8 mm, 88.9 x 4.5 mm, 114.3 x 8.8 mm, 139.7 x 8.8 Z5728996 mm,
168.3 x 12.5 Z5728996 mm, 168.3 x 8.8 mm

The following outer diameters of the mandrels were measured:

23.2 mm, 32.3 mm, 37.1 mm, 41.5 mm, 59.3 mm, 70.3 mm,
77.7 mm, 80.9 mm, 88.7 mm, 93.2 mm, 94.7 mm, 103.0 mm,
112.8 mm, 118.8 mm, 128.9 mm, 138.5 mm, 147.2 mm, 153.6 mm

The accessory package has a value of around €150,000



The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

seller offer No. resale 2084-1062
Розповісти про цю машину на Facebook:
TOP
Seller
затверджений
дилер

Продавець

logo dealer

ZOMA Maschinenhandel

пан Gerd Zogbaum
04838 Eilenburg
Germany

RESALE член з 2008

  • список машин (217)

Запит

Ви дилер техніки?

Будь ласка, виберіть опціонально

Відправити запит пошуку?

(всім дилерам для такої машини)

Копію для вас?

(копія вашого запиту буде відправлена на вашу адресу електронної пошти)

Save input data

(Save input data for further inquiries)

більше LANG EL-HY168F CNC + similar LANG-Модель

2002 LANG120 CNC
LANGEL-HY 168 F CNC