Rösler C20.30/0,6/B/SOP/P/SOP

Belt washing system Rösler C20.30/0.6/B/SOP/P/SOP,, Year of manufacture: 2016, Serial No.: 72441,, Stainless steel, for container dimensions 400 x 600 mm, consists of the following work zones:, washing 1, blow off 1, washing 2, blow-off 2, Cooling with ambient air, The workpieces pass through the washing zones of the system continuously on a chain conveyor system., The drive is via a gear motor with speed control., The surface of the workpieces is first sprayed and cleaned on all sides using nozzles., The workpiece carriers then pass through the blow-off zone, where the workpieces are blown off with filtered ambient air via special nozzles., Analogously, the workpieces pass through another washing and blow-off zone (washing 2 + blow-off 2), To ensure the cleanliness of the workpieces and the washing liquid, each washing zone is equipped with a filter system., To improve washing and drying efficiency, the cleaning baths are heated by electric heating elements installed on the sides of the circulation tanks., The parts then pass through a cooling zone in which they are blown with filtered ambient air and thus cooled., -duty cycle-, Working zones | Time sec. | Temperature °C | Length in mm, Loaded: 500mm, Inlet: 40 sec | 400mm, Wash 1: 60 sec | 50 °C | 500mm, Dripping + blowing off: 60 sec | Ambient air | 600mm, Wash 2: 60 sec | 50 °C | 600mm, Dripping + blowing off: 60 sec | Ambient air | 400mm, Cooling via fan: 60 sec | Ambient air | 600mm, Unloading: 500mm, Total length (center distance of chain pulleys): 4400 mm, -Pumps-, Zone | Delivery rate | Pressure | Performance, Washing 1: 150 l/min | 5 bar | 3 kW, Washing 2: 150 l/min | 5 bar | 3 kW, -circulation tank-, Zone | Volume, Washing 1: 400 l, Washing 2: 400 l, -filtration-, 1 coarse filter in the suction line of each pump to prevent the ingress of foreign bodies, 2 basket filters 500 μm on the return line in each container, 1 piece. Bag filter 50 μm after the pump for washing 1, 1 piece bag filter 50 μm after the pump for washing 2, -Heating (designed for a heating time of 1.5 hours)-, Washing 1: Heating by means of electric heating elements on the side of the circulation tank; total output: 18 kW, Washing 2: Heating by means of electric heating elements on the side of the circulation tank; total output: 18 kW, -transport system-, The transport system consists of 2 parallel transport chains that run continuously. The chains are driven by a gear motor with speed control., - Power: 0.35 kW, - Nominal speed: 0.6 m/min, switching device, - Free-standing control cabinet with all operating and display elements with Siemens PLC type S7-1200 and KTP 700 operator panel for entering and monitoring all process parameters., - Automatic preheating of the washing bath possible via the PLC control, - Flashing light and horn for general disturbance, - Air conditioning unit for cooling the switching device (designed for ambient temperatures of max. 40°C), - Operating voltage: 400 V, 50, Construction year: 2016