Перевірений дилер
Детальніше
GLEASON - PFAUTER G 320
Зубошліфувальні верстати
KLINGELNBERG PFSU 1600 HP
вживанийПеревірений продавець
Запитати ціну
Безпосередньо продавцю
1 / 4
Технічні характеристики
· ID 170033642Вживані машини
- Стан
- вживаний
- Рік випуску
- 1985
- Місцезнаходження
- ab Lager Süddeutschland
Identifikation
ВиробникKLINGELNBERG
МодельPFSU 1600 HP
Номер позиції1020-09135
Technik
Кількість1
Опис
max. wheel diameter: 1600 mm
gear width: 250 mm
max. module: 20
min. module: 1,5
base circle dia. - max.: 1450 mm
base circle dia. - min.: 150 mm
specimen weight from/to: 4000 kg
feeler adjustment movement - parallel: 1400 mm
max.helical angle: 0 - 90 °
wheel diameter with counterstay: 1000 mm
feeler adjustment movement - parallel: 800 mm
centre height: 1150 mm
electrics - voltage/frequency: 400 / 50 V/Hz
dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m
total power requirement: 2 kW
weight of the machine ca.: 3 t
Universal Involute and Helix Testing Machine - modernized 1995
Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and
shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle,
Profile corrections, Helix angles and leads, Lines of contact, Surface roughness, Concentricity of teeth, Tooth to tooth pitch error, Tooth thickness and tooth width over several teeth, Lots of other measuring possibilities.
Accesories / Special Features:
+ Optical setting of base circle and optical angle settings without the use of base circle plates
+ Heavy workpieces can be tested on the machine. Motor-driven testing process, or manual control using
hand wheels.
+ Auxiliary rotary table, dia. 480 mm, for mounting larger gears, with 2 sets of extending supports
400 and 470 mm long
+ Counter bracket Model AV 17 with maximum mounting length of 1150 mm
+ Separate electric cabinet for controlling manual movements, in conjunction with...
+ GFM Computer, Model ZMP 20 e with software for automatic dressing of gears,for the production of modern measuring printouts with graphics. The graphics are also displayed on a monitor. Various sub-programs and HP printer
+ Varous probe inserts and small parts, as well as a height adjustable holder for an indexing device, mounted
on the back of the machine (but without the indexing device) Levelling feet
in very good working condition - Machine can be inspected under power - Serial-Number B 2281
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
gear width: 250 mm
max. module: 20
min. module: 1,5
base circle dia. - max.: 1450 mm
base circle dia. - min.: 150 mm
specimen weight from/to: 4000 kg
feeler adjustment movement - parallel: 1400 mm
max.helical angle: 0 - 90 °
wheel diameter with counterstay: 1000 mm
feeler adjustment movement - parallel: 800 mm
centre height: 1150 mm
electrics - voltage/frequency: 400 / 50 V/Hz
dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m
total power requirement: 2 kW
weight of the machine ca.: 3 t
Universal Involute and Helix Testing Machine - modernized 1995
Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and
shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle,
Profile corrections, Helix angles and leads, Lines of contact, Surface roughness, Concentricity of teeth, Tooth to tooth pitch error, Tooth thickness and tooth width over several teeth, Lots of other measuring possibilities.
Accesories / Special Features:
+ Optical setting of base circle and optical angle settings without the use of base circle plates
+ Heavy workpieces can be tested on the machine. Motor-driven testing process, or manual control using
hand wheels.
+ Auxiliary rotary table, dia. 480 mm, for mounting larger gears, with 2 sets of extending supports
400 and 470 mm long
+ Counter bracket Model AV 17 with maximum mounting length of 1150 mm
+ Separate electric cabinet for controlling manual movements, in conjunction with...
+ GFM Computer, Model ZMP 20 e with software for automatic dressing of gears,for the production of modern measuring printouts with graphics. The graphics are also displayed on a monitor. Various sub-programs and HP printer
+ Varous probe inserts and small parts, as well as a height adjustable holder for an indexing device, mounted
on the back of the machine (but without the indexing device) Levelling feet
in very good working condition - Machine can be inspected under power - Serial-Number B 2281
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Запитати про цю машину
Ваш запит надійде безпосередньо продавцю цієї машини.
