| Опис: |
Фрези з тонким ударом HERBOLD Complete milling line for plastic - Fine Impact Mi
вживана машина
General SKULU005 LocationNetherlands MakeHerbold Main Features
Motor110 KW Specified Features - Fine Impact Mill MaterialMild
steel, Stainless steel Information With control cabinetcheck Floor
space10,9x7,3 m Total height7,3 m CEcheck Extra SpecificationsThe
system comprises a range of specialized machinery tailored for plastic
processing and material separation: 1. Granulator (Type SMS
45/60-H5-3): This machine is equipped with a cutting chamber, rotor,
and high-quality blades for size reduction. It also includes an
extraction system for efficient operation. 2. Air Separation Unit
(Type SZS2 450/150): Featuring an air stream separator and adjustable
air flow, this unit efficiently separates light materials. It is
complemented by a rotatory lock and a suction unit for enhanced
performance. 3. Buffer Bunker with Screw: Serving as a material
buffer, this component has indicators for monitoring material levels
and uses a screw conveyor for controlled feeding. 4. Pulverizer (Type
PU 800): Designed for processing rubber materials, the pulverizer is
equipped with a powerful motor and a metal separator for precise
material refinement. 5. Screening Machine (GTS 2000): This machine,
driven by a 4 kW motor, is optimized for generating fine powder. It
incorporates a rotatory lock for efficient material flow. The system
comprises a range of specialized machinery tailored for plastic
processing and material separation. For more detailed information
about each machine, please refer to the following expanded
descriptions: The Granulator Type SMS 45/60-H5-3, SN: 21569, built in
2021 with CE certification, boasts a cutting chamber opening of
600x578 mm and rotor measurements of 450 mm in diameter and a cutting
width of 580 mm. It features 5 rotor blades and 3 stator blades, all
crafted from high-quality D2 chrome-nickel tool steel. Powering this
machine is a 75 kW motor operating at 400/690 Volts and 1500 rpm.
Additionally, it includes an extraction system: Type MFR 35/300 with a
7,5 kW motor, operating at 400/690 Volts, and a maximum air flow of 35
m³/min. The Air separation unit, Type SZS2 450/150, SN: 21571,
features an air stream separator channel designed in a zig-zag pattern
for easy maintenance. The separation of light materials is achieved
through a suction blower, drawing air counter to the material flow
within the channel. The air stream can be adjusted using a frequency
converter. The channels cross-section measures 450x150 mm.
Furthermore, it comes equipped with a rotatory lock, Type ZSL 315-400,
SN: 21572, CE certified, with a maximum RPM of 38. It also features a
suction unit, Type MFT 30/300, with a 4 kW motor, operating at 400/690
Volts, and a maximum air flow of 30 m³/min. The Buffer Bunker with a
screw has an approximate volume of 1 m³ and serves to buffer
pre-ground material. It includes indicators for both full and low
levels and employs overload-controlled feeding to supply material to
the pulverizer via a transport screw. The screw conveyor, Type RS170,
SN: 21575, is 4650 mm long, driven by a 1.5 kW motor at 45 rpm, with a
capacity of F4652068 0.3 t/h (EPDM SG 0.4 t/m³, inclined at
approximately 50°). It also features the same rotatory lock, Type ZSL
315-400, SN: 21572, CE certified, with a maximum RPM of 38. The
Pulverizer Type PU 800, equipped with a screen, bears the SN: 21577
and was produced in 2020. It features a 110 kW motor operating at
400/690 Volts, designed for processing rubber materials. Additionally,
it includes a metal separator, Quicktron 03 R, SN: 21578. This machine
also incorporates a suction unit, MFT 100/1000, SN: 21579, CE
certified, with a 30 kW motor operating at 400/690 Volts, and a
maximum air flow of 100 m³/min. The Screening machine, GTS 2000, SN:
21581, is equipped with a 4 kW motor operating at 400/690 Volts,
designed for generating powder in the range of 0,4 to 1 mm. The screen
diameter measures 1600 mm. Similar to the previous equipment, it is
also equipped with a rotatory lock, Type ZSL 315-400, SN: 21572, CE
certified, with a maximum RPM of 38.Fine Impact MillsHerboldMills >
Fine Impact MillsBrand > Herbold What you can expect from Foeth: --
Machine is in working condition -- At a reduced price compared to new
-- Ready for shipping to any destination worldwide -- You are welcome
to inspect the machine in Barneveld, The Netherlands. Please visit us
in Barneveld for many more machines!
seller offer No. resale LU005
|