| Cabine |
Full protection cabin |
| Motor spindle 20,000 rpm |
Motor spindle speedMASTER® HSK-A 63 Spindle speed
20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm /
86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| Taper cleaning brushes |
Taper cleaning unit with rotating brushes for
spindle taper HSK |
| NC swivel rotary table DirectDrive |
NC swivel rotary table direct drive Table plate: d
650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table
centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible
load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive
Swivel-a |
| Kinematics axis A / C for swivel rotary
table |
Axis kinematics A/C for swivel rotary table Axis
designation swivel axis: A Axis designation rotary axis: C 0°
position A axis: table vertical Rotary axis setting: modulo Machine
datum: In table center on the table top Not compatible with monoBLOCK
kinem |
| Tool magazine, wheel, 273 pockets |
Tool magazine wheel magazine (3 wheels) with 273
tool pockets HSK-A63 or optionally chosen spindle taper |
| Coolant tempering/internal coolant
supply |
Coolant tempering for internal coolant unit 980 lt
/ 259 gallon Heating capacity max.: 3,000 W / 4 hp Cooling capacity
max.: 3,800 W / 5.1 hp |
| ICS unit frequency controlled 80 bar 980
l tank |
Internal coolant supply unit: 980 l / 259 gallon,
paper band filter Internal coolant supply, frequency controlled 10
bar/37l/min - 80 bar/31 l/min - 145 psi/9.7 gpm - 1,160 psi/8.2 gpm
through spindle centre (AD) External coolant supply 4 bar / 58 psi -
4 |
| Rotating clear-view window |
Rotating clear-view window cabin door |
| Cooling |
Cooling by air blast through spindle centre,
selection with M function |
| Infrared measuring probe Renishaw HSK-A
63 |
Infrared measuring probe Type Renishaw OMP 60
HSK-A 63 |
| Tool measuring in machining area Blum
Laser |
Tool measuring in machining area Blum Laser
DIGILOG Tool length and diameter measurement vertically |
| Tool breakage control mechanical |
Tool breakage control mechanical version |
| 3D quickSET extension package |
3D quickSET extension package for each further
machine: software / password (only together with option measuring
probe and existing set of measuring tools) |
| Maintenance Package I4.0 |
Maintenance Package I4.0: - measurement of tool
pull-in force - autom. lubrication of tool clamp - monitoring of
pneumatics |
| Sensorpaket i4.0 |
Sensor package i4.0: MPC Machine Protection
Control SGS Spindle Growth Sensor ICS flow sensor |
| proTIME |
proTIME Visualisation of the remaining runtime,
remaining workpieces and the machine state |
| Rotary Pallet Storage RPS 9 incl. 9
pallets |
Rotary Pallet Storage RPS 9 incl. adaption of
swivel rotary table and 9 pallets 500 mm x 500 mm / 19.7 in x 19.7 in,
T-slots D4452871 following DIN 55201-A2 (9 pallets in total for
machine with storage) Automatic front door Operation panel for loading
station |
| Laminated safety glass |
Laminated safety glass for window in right cabin
door |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area
Release after completed check list |
| IoTconnector |
IoTconnector The IoTconnector allows the use of
online services of DMG MORI (e.g. NETservice) |
| ATC (Application Tuning Cycle) |
ATC (Application Tuning Cycle) programmable feed
parameter selection for machining task: accuracy/ surface/ speed |
| MDynamics package |
Deckel Maho package MDynamics Improved surface
quality combined with reduced machining time |
| NETservice |
NETservice Qualified support by Internet-based
remote diagnostics |
| Machine Data Connector |
Machine Data Connector (MDC) Uniform machine data
interface. |
| Messenger V4 |
Messenger V4 Clear presentation of the machine
live status. |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |
| Special equipment |
- Exhibition Design - Mode 4, deselection via
machine constants - Lighting in tool magazine room - Painting cover -
Interface to TDM system including Datamatrix scanner in external
Tool quiver, tool input station. Siemens not Omron - VCS Complete
ex |
| Special equipment |
The delivery of the machine is in standard
accuracy according to DECKEL MAHO test protocol. Position uncertainty
Pmax=0,012mm Cooled feed drives, cooled ball screws ball screws,
additional cooling unit and coolant temperature control system
remained in th |