Виробник:
(Категорія: 102)
workpice diameter max.: 90 mmforward bearing diameter: 140 mmTurning speeds mainspindle: 4.200 U/minPower: 35,5 KWControl: INDEX C 200-4 travel -x axis: 1.500 mmtravel -z axis: 340 mmtravel -y axis: 180 mmb-axis: 360 °CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis.Further information:- direct measuring system on X + ZThe machine is in good condition.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: V-300 | V 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0390 мм: 240 мм: 1250 мм: 190 мм: 54 мм: 5,5 кВ
Керування Fanuc 18i-TB Діаметр повороту. [мм] 130 Довжина повороту [мм] 110 Загальне: Рік побудови 2008 Керування Fanuc 18i-TB Діаметр токарної обробки 130 мм Довжина повороту 110 мм Окружний діаметр 200 мм Висота деталі не більше 110 мм Шпинделя: Технологія шпинделя двигуна Частота обертання 7 500 об/хв Потужність 24 кВт Крутний момент 158 Нм Вісь C 0,001 Затискні циліндри Повнозатискні циліндри Тримач інструменту (X/Z): Технологія Зоряна Башта Кількість станцій 12 штук Тримач інструменту VDI 40 Привід інст ...
Circulation/rotation Ø over bed: 475 mmRotation/rotation Ø via cross slide: 260 mmSledge path plan: 260 mmcentre distance: 1000 / 1500 / 2000 mmpower capacity: 22 kWGear stages. m= manual / e= electric.: 2 e Spindle head DIN 55026 / DIN 55027: A6 / 6 Spindle Ø in front bearing: 115 mmspindle bore: 78 / 70 mmturning speed range (V-constant): 1 - 3.000 U/minfeed range flat: 1µ - 1.000 mm/Ufeed range lengthwise and thread: 1µ - 2.000 mm/URapid traverse plan/longitudinal: 5 / 10 m/mindiameter of quill: 70 mmquill travel: 120 mmquill inner cone: 5 MKThis machine is used for the production of individual parts and small batches from simple to the most complex contours.It is characterised by:--> Ease of operation Precision Working range
turning speeds: 6000 U/minx-axis: 550 mmz-axis: 200 mmrapid traverse: 30/20 m/minfeed: 11 m/mincontrol: Siemens 840 C total power requirement: 35 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: m- speeds: [1/min.] : 6.000- torque [Nm]: 480- swing diam.: 290 mm- power: [kW] 34- chuck diam. 200 mm- turret: 12-fach, VDI 40, Sauter- driven tools 7,8 KW,- x -travel: 550 mm- z- travel: 200 mm- rapid travel: (X/Z) [m/min] 30 / 20- feeds: (X/Z) [m/min.] 11 KN- connected load: [KW] 36 kW- machineweight: [kg] 6.500- chip conveyor, pick up conveyor links,300mm wide, Auswurfhöhe 800mm- Messsystem direkt-linear, Glasmaßstäbe in allen Achsen, Heidenhain- parts conveyor for feeding parts into the machine- Specification:- Overhauled in 2007 for approx. €50,000, complete headstock replaced.- Feed unit replacedThe data for this ad was created with ModulMWS - the software solution of ...
: 0400 mm: 1250 mm: : 200 mm: 80 mm: 315 mm: 2700 U/min : D1-8 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.666h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Висота по центру: 102 ммМіжосьова відстань: 450 ммОтвір під шпинделем: 25 ммШвидкість обертання шпинделя: 220 - 2600 Вага машини Ca.: tГабаритні розміри машини Ca.: mАксесуари не перевірялися на комплектністьШафи не входять в комплект поставк
swing dia.: 600 mmturning diameter: 310 mmturning diameter over slide: 355 mmspindle bore: 53 mmbar capacity: 45 mmturning speed range: 6000 U/minturning length: 388 mmtravel -z axis: 400 mmtravel -x axis: 220 mmturret (x-stations): 12 control: SIEMENS 828D (Touch) c-axis: 0,001° 0total power requirement: 20 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: LTH 3,7 x 2,0 x 2,0 mIncludes preparation for automation (loading robot)Year of manufacture: 11/2017, delivery: 2018- Automatic door- 12-station tool turret, driven at 5,000 rpm- Workpiece catcher- RENISHAW touch probe, automatically retractable- Tailstock- Chip conveyor- Coolant pumpAccessories:Including collet chuckIncluding 2 x driven tool holders (radial + axial)Including 9 x fixed tool holdersIncluding USB & LAN interfaceIncluding manualsThe data for this ad was created with ModulMWS - the software solution of Lo ...
turning diameter: 700 mmturning length: 1250 mmcontrol: TX8_i total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: 6,0 x 2,5 x 2,2 mCNC control TX8_i9 CNC axes (X1, X2, Z1, Z2, Y1, B1, B2, C1, C2)Software functions:Tool life monitoring,Polyform, 3D-Helical IP, synchronous threads without L compensation,WOP Traub Win_Flex IPS incl. Mouse,MAIN SPINDLE (direct drive, adjustable hollow shaft motor)Spindle connection A-11 > DIN 55026/ 55021Alignment and switching deviceHollow clamping cylinder > spindle passage max. 102 mm speed max. 3,000 rpmFront bearing dm170 mmDrive power 100/40% ED 53 / 68 kW, torque 675 / 900 NmC-axis resolution 0.001 °Spindle locking for extreme roughing work 2.5 °Counter spindle (direct drive, adjustable hollow shaft motor)Spindle connection A-11 > DIN 55026/ 55021Alignment and switching deviceFull clamping cylinder SINS-140 > Sp ...
number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 6.944h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.650h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1250 mmturning diameter over slide rest: 1000 mmturning length: 11000 mmtotal power requirement: kWweight of the machine ca.: 49 tdimensions of the machine ca.: mCenter height 720 mmCenter distance 11000 mmTurning diameter over bed 1250 mmTurning diameter over slide 1000 mmWorkpiece weight max 12 toSpeed 3-315 rpm - steplessMotor power 55 kW (DC)Equipment1 position indicator HEIDENHAIN | Type ND 780 for 1 axis1 four-jaw faceplate Ø 1000 mm1 fixed steady rest1 ring steady rest with four-jaw faceplate Ø 920 mm1 Autom. 4-pos. tool holder1 Chip conveyor1 Machine lamp1 Coolant device Operating key | operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 400 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 70 - 2000 U/mincentre height: 195 mmspindle bore: 54 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0.85 tdimensions of the machine ca.: 1,95 x 1,0 x 1,75 mProfessional industrial machine3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 0 mmturning diameter over slide rest: 900 mmturning length: 1.000 mmtotal power requirement: 25 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mHeight of centres 550 mmMax. turning Æ 1200 mmMax. turning Æ over slides, approx. 900 mmMax. turning length, approx. 1000 mmSpindle bore, approx. 90 mm24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/minTotal load, approx. 25 kW - 380 V - 50 HzWeight, approx. 8000 kgAccessories/specialitiesTwo separate slides, each equipped with 2-coordinate copyingequipment, program controlled by plugboard, strengthened bearingsand spindle, hardened an ...
turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 1,1 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,3 x 0,6 x 0,65 mBenchtop lathe 3-axis LCD digital display system fully assembled.Longitudinal feed.3-jaw chuck 125 mm.4-jaw chuck 125 mm.Clamping plate.4-way steel holder.Clock for thread cutting.Drip trayHardened bed tracks.Emergency stop switch.Forage protectionSet of wheels.Appropriate tools.Base cabinet is optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Діаметр повороту: 250 ммДовжина повороту: 450 ммУправління: TX8D Отвір: 80 ммШвидкість обертання шпинделя:: 3150 Од/хв.Токарний верстат з ЧПУ з подачею стрижня та 3 револьверними головкамиДуже великий отвір шпинделя з пристроємдля завантаження штанги Будь ласка, запитайте додаткову інформацію.
turning diameter: 250 mmturning length: 400 mmcontrol: C 200 / 8 total power requirement: 60 kWweight of the machine ca.: 8,5 tSwing Ø above bed, max. 300 mmMax. turning Ø for chucking work, approx. 250 mmTravel of Slides:Turret 1, X / Z travel 163 / 550 mmTurret 2, X / Z / Y travel 140 / 250 / 260 mmSpindle bore, approx. 65 mmTool holder bore 30 mmSpindle speeds 25 - 5,000 rpmFeed range 0 - 15,000 rpmSpindle drive 0.5 - 40 kWTotal electrical load 60 kW - 380 V - 50 HzWeight, approx. 8,500 kgAccessories / Special Features SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. Spindle indexing and pos ...
turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 20 mmtailstock quill taper MT: 2 tailstock quill stroke: 60 mmmetric threading: 0,4 - 3,0 mmthread - inch: 10 - 44 TPIthread - module: 0,2 - 12,5 mmconnected load frequency: 230 Vtotal power requirement: 1,0 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,09 x 0,59 x 0,45 mEquipped with- 20 mm spindle passage- adjustable guideways- Powerful 1.0 kW motor- continuously variable speedScope of delivery:- 3-jaw chuck 100 mm,- 4-jaw faceplate chuck 125mm- standing and rotating bezel- Splash guard- Feed protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 25-90 mmthreading length: 3000 mmthread pitch: 2-16 mmtotal power requirement: 25 kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 250 mmturning length: 100 mmcontrol: SIEMENS 840 D total power requirement: 35 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mE M A G (Germany)Vertical CNC Controlled Hard Turning and Grinding machinewith tool turret and workpiece handling SystemModel VSC 250 DS Year 2004 # M7 28.69324_______________________________________________________Turning Ø, max. 250 mmTurning length internal / external 100 mmWorkpiece length min./max. 29 – 100 mm6-positon tool turret Ø / swing-Ø 480/790 mmWorkpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mmFeed rate / Quick feed X/Z 45/30 m/min.Feed force X/Z ...
turning diameter: 400 mmturning length: 915 mmcontrol: NUM Type 1062 T total power requirement: 12,5 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 300 mmturning length: 710 mmcontrol: SIEMENS SINUMERIC 840 total power requirement: 40 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mI N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstockand INDEX CNC Control C 200 – 4 (SIEMENS)Model G 300 Year 1995 S/N 5000 65_____________________________________________________________Turning - Ø, with chuck, max. 300 mmSpindle bore 90 mmMax. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mmTurret head slide cross movement (Z-Axis) max. 140 mmTurret with 12 tool holder positions DIN 30 mmFeed range of turret slide / ...
turning diameter: 150 mmturning length: 500 mmcontrol: total power requirement: 4 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 200 mmturning length: 400 mmcontrol: SIEMENS SINUMERIC 840 C total power requirement: 40 kWweight of the machine ca.: 6.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 125 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,135 tdimensions of the machine ca.: 1,25 x 0,6 x 0,6 mSpeed in 6 levels 125 - 2000rpm.3-jaw chuck 125 mm.4-jaw chuck 125 mm. (Independent)Fixed bezel.Revolving bezel.4-fold steel holder.chip tray.back panel.spindle protection.Hardened bed rails.Longitudinal feed with left / right switching.Set of change gears.Associated Tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: 320 mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 connected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,75 x 1,7 mSINO digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 250mmbezel fixedQuick-change steel holder with 4 pcs. steel holdermachine lightChip tray, chip protection wallHardened and ground bed trackslining protectionmachine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ми продаємо токарний центр Haas ST-20 від імені замовника. Машина була встановлена і ніколи не використовувалася продуктивно., - Можливості управління, - пакет опцій, - потік охолоджуючої рідини під високим тиском, - пакет аксесуарі
Діаметр повороту: 60 ммДовжина повороту: 200 ммКількість слайдів: Загальна потреба в потужності: 20 кВтвага машини приблизно : tРозміри машини Бл.:
turning diameter: 42 mmturning length: 250 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC-lathe with bar feedwith Sameca bar feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
