Виробник:
(Категорія: 102)
Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide-Tool slide: Support slide lower part support carrier-Dovetail: 90 to 73 mm 12 mm high-Dimensions: see photos-Quantity: 5x bottoms available-Price: per piece-Dimensions: 210/180/H25 mm-Weight: 4 kg/piece
Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: VDF Heidenreich & Harbeck, Leadscrew and Feedscrew Lathe Type V3 -Machine bed: hardened -Turning length: 1700 mm -Turning Ø over bed: 500 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 57 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Bezel: 150 mm -Drive: 7.5 kW -Accessories: Keyless collet, tool holder, tools see photos -Dimensions: 1440/3370/H1515 mm -Weight: 2510 kg
chuck flange, flange holder, lathe chuck flange, driving flange, lathe chuck faceplate-Manufacturer: Röhm, chuck flange for three-jaw chuck, four-jaw chuck, faceplate-Type: 55021/22-6 Ø 220 mm-Bolt circle: Ø 134 mm-Hole: Short taper 6, cone Ø 103 - 106 mm-Dimensions total Ø 220 x 190 mm-Weight: 20.1 kg
Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier-Tool carriage: support carriage support carrier-Support plate: 265 x 180 mm-Dimensions: see photos-Dimensions: 290/280/H70 mm-Weight: 21.1 kg
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg
Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed-Feed size: Ø 250 mm-Weight: 35.5 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 130 mm -Bolt circle: Ø 75 mm -Hole: short cone 3, cone Ø 51 - 53 mm -Dimensions total Ø 130 x 50 mm -Weight: 1.4 kg
Precision lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: WEILER, lead screw lathe type commodor 42 -Machine bed: hardened -Turning length: 900 mm -Turning Ø over bed: 400 -Turning Ø over support: 190 mm -Spindle bore: Ø 56 mm -Spindle speeds: 45 - 2000 rpm -Three-jaw chuck: Röhm Ø 200 mm -Four-jaw chuck: Röhm Ø 200 mm -Tailstock mount: MK3 -Drive: 4 kW -Accessories: 18x Multifix tool holder with rotating center see photos -Lathe dimensions: 2200/1300/H1410 mm -Weight of lathe: 1380 kg
Upper support, upper slide, dovetail guide, tool slide, cross table-Tool slide: from automatic lathe SUGA type STS-2-Measurements: see photos-Dimensions: 1080/530/H290 mm-Weight: 121 kg
Upper support, upper slide, dovetail guide-Rezess: Ø mm-Hole circle: Ø mm-Dimensions: 121/295/H200 mm-Weight: 12 kg
tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Sauter, tool changer type 0.5.675.112 from vertical lathe Scherer VDZ 80 DS -Tool turret: Type 0.5.901.012 for max. 12 tools -Servo motor: Siemens type 1FK7063-2AC74-1SB0 -Individual components: see photos -Dimensions: 560/450/H300 mm -Weight: 117 kg
Tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Swedturn, Type ST12 CNC 300 tool changer -Tool turret: for max. 12 tools -Tool holder: Ø 60 mm -Individual components: see photos -Dimensions: 565/470/H565 mm -Weight: 319 kg
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 220 mm-Inside: Ø 100 mm-Dimension: Ø 220 x 70 mm-Weight: 6.1 kg
Three-jaw chuck, three-jaw lathe chuck-Chuck size: Ø 165 mm-Passage: Ø 47 mm-Weight: 7 kg
Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks-Manufacturer: Röhm, chuck flange for power chucks, three-jaw chucks, four-jaw chucks, faceplate-Type: 55021/22-6 Ø 210 mm-Bolt circle: Ø 133 mm-Dimensions total Ø 210 x 170 mm-Weight: 12.4 kg
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 210 mm-Inside: Ø 76 mm-Take: short taper 6, cone Ø 105 mm-Dimension: Ø 210 x 65 mm-Weight: 3.5 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 30-39 mm-Type designation: not available-Dimensions total Ø 180 x 75 mm-Weight: 5.9 kg
Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe-Manufacturer: WMW, automatic lathe type DRT 50m-Turning length: 550 mm-Turning Ø over bed: 530 mm-Spindle bore: Ø 63 mm-Spindle speeds: 9 - 450 rpm-Three jaw chuck: Ø 200 mm-Turret: with accessories, see photos-Drive motor: 5.3 / 6.8 kW-Dimensions: 2420/1040 / H1460 mm-Weight: 2200 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 50-60 mm-Type designation: not available-Dimensions total Ø 180 x 90 mm-Weight: 8 kg
Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 300 mm -Reference: Short cone 8 (139.8 mm) -Dimensions: Ø 300 x 100 mm -Weight: 14 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 213 mm-Mounting: Hole shaft cone Ø 56-59 mm-Type designation: not available-Dimensions total Ø 260 x 120 mm-Weight: 14.3 kg
spindle head for lathe, lathe spindle head, lathe spindle head-Manufacturer: Scherer, spindle head from vertical lathe VDZ 80-Clamping head: Hainbuch SK80BZIG SP.0219.0034.00-Clamping device: SMW Autoblok Cil.85 SIN-S no-cc-Individual components: see photos-Price/Delivery: complete-Dimensions: 1350/560/H495 mm-Weight: 330 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 49-64 mm-Type designation: not available-Dimensions total Ø 210 x 125 mm-Weight: 10.9 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 163 mm-Mounting: Hole shaft cone Ø 44-54 mm-Type designation: not available-Dimensions total Ø 220 x 85 mm-Weight: 8 kg
Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 210 mm-Inside: Ø 50 mm-Take: cone Ø 138 mm/short cone 8-Dimension: Ø 210 x 85 mm-Weight: 5 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 213 mm-Mounting: Hole shaft cone Ø 44-54 mm-Type designation: not available-Dimensions total Ø 230 x 85 mm-Weight: 10.3 kg
Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 280 mm-Inside: Ø 105 mm-Take: cone Ø 138 mm/short cone 8-Dimension: Ø 280 x 35 mm-Weight: 13 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 260 mm -Adapter: short cone size 6 (Ø103-105 mm) -Bolt circle: Ø 133 mm -Dimensions: Ø 260 x 140 mm -Weight: 11.2 kg
Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate, mounting flange -Muck flange: Mounting flange for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 162 mm -Socket: Short cone 5, cone Ø 79 - 82 mm -Hole circle: Ø 105 x 10 mm / Ø 62 mm M10 -Passage: Ø 41 mm -Dimensions: Ø 162 x 48 mm -Weight: 4.7 kg
Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm -Weight: 19 kg
