Тип обладнання
(Кількість: > 9)
Тип обладнання
(Кількість: > 2)
Виробник:
(Категорія: 1406)
Transnorm curved belt conveyor right bend 125°-775-600 IR600 RA2012 Technical details:Manufacturer: TransnormType: Belt Curve 125° rightTS 1500-100 Curved belt conveyorYear of manufacture: 2001Angle: 125°Running direction: rightinner radius (IR): 600 mmbelt width (GB): 600 mmSpeed: please contact, motor not yet mountedBelt type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Scope of delivery: without supports & sideguide (please inquire if required)Optional: supports & sidequides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: condition: good (used)Nominal / inner radius in mm: 600Nominal / outside width in mm: 670Belt width in mm: 600angle: 109°Driven: YESRunning direction: RIGHTEngine type: SEW EurodriveConveyor speed m / s: 1,0scope of delivery: without supports and side guidesFür eine individuel ...
Transnorm belt curve conveyor left 90°-750-550-IR900 RA2007 Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data:Frame width (NB): 750 mmbelt width (GuB): 550 mmheight (BH): 210 mm height including motor (MH): 480 mm Inner radius (IR): 900 mmConveying angle: 90° degreesConveying speed (v m/s): contact usDrive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.55 / S1Belt:KT58, will be changedYear of construction: 1997 Optionally available:SupportsSide guide one and both sidesfrequency inverter Prices net plus VAT from cen ...
Transnorm belt curve conveyor left 90°-1000-800-IR900RA2001Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running.Technical data:Type designation: belt curve conveyorStand width (NB): 1000 mmBelt width (GuB): 800 mmMotor width (MB): +200 mmoverall height (BH): 210 mminner radius (IR): 900 mmConveying angle: 90° degreesConveying speed: Please contactDrive: SEW gear motor with Movi-MotElectrical data: 50Hz V230/400, kW 0,37 /S1Year of construction: 1992Included: Side guide on both sides and frameOptionally available:SupportsSide guide one- ...
Transnorm curved belt conveyor right 150°-780-600-IR600RA2002Technical data:Manufacturer: TransnormYear of manufacture: 1996Condition: good (used)Motor: will be changedconveying angle: 150°nominal/external width (NB): 780 mmbelt width (GB): 600 mminnerradius (IR): 600 mmoverall height (BH): 210 mmmotor height (MH): 450 mmMotor type: SEW gear motorMotor power: kW 0.55 230/400 V 50HzConveying speed: please contactScope of delivery: without supports (if required, please contact us)Optional: supportsSide guidesFrequency converter for stepless speed controlPrice plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: Construction year: 1996condition: gutNominal / inner radius in mm: 600Nominal / outside width in mm: 780Belt width in mm: 600angle: 150°Driven: YESRunning direction: RIGHTEngine type: SEW EurodriveKW: 0,55/S1scope of delivery: without supports and side ...
Transnorm belt curve conveyor left GF50°-740-550 IR700 RA1948 Technical data: Conveying length middle radius (NL): 851 mmFrame width (NB): 750 mmbelt width (GuB): 550 mmheight (BH): 200 mm Inner radius (IR): 700 mmConveying angle: 50° degreessupport feet: optionally availableConveying speed (V m/s): 0,045-1,3m/sDrive: SEW gear motor Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1belt: double layer, green, smoothYear of construction: 2001 Optionally available:Supports:Side guide one- and both sideds Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001condition: good (used)Nominal / inner radius in mm: 700Nominal / outside width in mm: 740Belt width in mm: 550angle: 50°Driven: YESRunning direction: LINKSEngine type: SEW EurodriveKW: 0,55/S1Ampere: 1,60Conveyor speed m / s: 0,8scope of delivery: without supports and s ...
Transnorm curved belt conveyor left 35°-780-600 IR600 RA1825 Make: TransnormRunning direction: 35° left runningbelt conveyor width (RB): 600 mmNominal/outer width (NB): 780 mmInner radius (IR): 600 mm 3x 300-500V Height frame: 280Scope of delivery:with motor, without supports (please enquire if required)Features: Construction year: 2001condition: gutNominal / inner radius in mm: 600Nominal / outside width in mm: 780Belt width in mm: 600angle: 35°Driven: YESRunning direction: LINKSEngine type: SEW Eurodrivescope of delivery: without supports and side guidesFor individual, expert advice, simply get in touch with us.Simply contact us by phone or email.We will be happy to help you plan and implement your projects.We look forward to hearing from you.With kind regardsYour team at Dr. Sonntag GmbH & Co. KGYour specialist and contact for intralogistics
Lippert Belt Conveyor Folding Switch track 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mmFrame width (NB): 750 mmbelt width (GuB): 600 mmheight (BH): 105 mmBelt height: 550 mm total height: 1070 mm basic dimensions: 1170x900 mmTilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/sDrive: SEW gear motor S37 DT71D4/MM03/BW1Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S1De ...
FAS belt conveyor 1090-630-500 RA2426 Manufacturer: FASMotor: without motor, driven by overdriveConveyor length (FL): 1090 mmNominal/outer width (NB): 630 mmBelt width (GB): 500 mm Profile height: 170 mmDrive roller: Head driveOptional: supportsSide guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: condition: gutConveying length in mm: 1090Nominal / outside width in mm: 630Belt width in mm: 500Driven: Übertriebscope of delivery: ohne Motor, without supports and side guidesFür eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KGIhr Spezialist und Ansprechpartner für Intralog ...
FAS belt conveyor 850-530-400 RA2427 Manufacturer: FASMotor: without motor, driven by overdriveConveyor length (FL): 850 mmNominal/outer width (NB): 530 mmBelt width (GB): 400 mm Profile height: 170 mmDrive roller: Head driveOptional: supportsSide guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: condition: gutConveying length in mm: 850Nominal / outside width in mm: 530Belt width in mm: 400Driven: Übertriebscope of delivery: ohne Motor, without supports and side guidesFür eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KGIhr Spezialist und Ansprechpartner für Intralogist ...
Transnorm conveyor belt GF 1000-600-500RA2423Technical data:Conveyor length (NL): 1000 mm frame width (NB): 600 mm, 800 mm with motorbelt width (GuB): 500 mmOverall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally availableConveying speed (v m/s): 0,85Drive: SEW gear motorElectrical data: 50Hz V380-500, kW 0,37 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmwelded again before saleOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 1999condition: good (used)Conveying length in mm: 1000Nominal / outside width in mm: 600Belt width in mm: 500Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 0,37/S1Conveyor speed m / s: 0,85scope of deli ...
Конвеєр стрічковий конвеєр стрічковий конвеєр 4500 мм довжина 100 мм ширина Стан: дуже хороший (б/в) Опис: Довжина транспортерної стрічки 4,5 метра Ширина стрічки 100 мм Габаритні розміри: 4500 х 270 мм х 1550 мм в т.ч. двигун Ідеальна функціональність
Transnorm belt conveyor 985-600-500RA2420The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a SEW gear motor. Supports are not included in the delivery. These are available as an option.Technical data:Manufacturer: TransnormType: TS 1100 belt conveyorYear of manufacture: 1999Condition: good (used)Motor: fully functionalconveying length (FL): 800 mmnominal/outer width (NB): 600 mmbelt width (GB): 500 mmoverall height (BH): 80 mmmotor height (MH): 545 mmMotor type: SEW Gear-driveMotor power: kW 0.55 230/400 V 50HzConveying speed: 0,8 m/sWeight: 60 kgScope of delivery: without supports (if required, please ask)Optional: supportsWe can also extend the conveyor to your needed dimensionPrice plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: Construction year: 1999condition: good (used)Conveying length i ...
Transnorm belt conveyor 1905-600-500 -- with new beltRA2422The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a SEW gear motor. Supports are not included in the delivery. These are available as an option.Technical data:Manufacturer: TransnormType: TS 1100 belt conveyorYear of manufacture: 1999Condition: good (used)Motor: fully functionalconveying length (FL): 1905 mmnominal/outer width (NB): 600 mmbelt width (GB): 500 mmoverall height (BH): 80 mmmotor height (MH): 545 mmMotor type: Van der Graaf drum motor TM 113 B25-434 ZMotor power: kW 0.55 230/400 V 50HzWeight: 60 kgScope of delivery: including new belt with order Optional: supportsSide guideFrequency converter for continuous speed controlWe can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeat ...
Transnorm belt conveyor 820-600-500RA2421The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option.Technical data:Manufacturer: TransnormType: TS 1100 belt conveyorYear of manufacture: 1999Condition: good (used)Motor: fully functionalconveying length (FL): 820 mmnominal/outer width (NB): 600 mmbelt width (GB): 500 mmoverall height (BH): 80 mmmotor height (MH): 545 mmMotor type: Van der Graaf drum motor TM 113 B25-434 ZMotor power: kW 0.55 230/400 V 50HzWeight: 60 kgScope of delivery: without supports (if required, please ask)Optional: supportsWe can also extend the conveyor to your needed dimensionPrice plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: Construction year: 1999condition: good (used)Conv ...
Transnorm belt conveyor 800-600-500RA1986The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option.Technical data:Manufacturer: TransnormType: TS 1100 belt conveyorYear of manufacture: 1999Condition: good (used)Motor: fully functionalconveying length (FL): 800 mmnominal/outer width (NB): 600 mmbelt width (GB): 500 mmoverall height (BH): 80 mmmotor height (MH): 545 mmMotor type: Van der Graaf drum motor TM 113 B25-434 ZMotor power: kW 0.55 230/400 V 50HzConveying speed: 2,8 m/sWeight: 60 kgScope of delivery: without supports (if required, please ask)Optional: supportsWe can also extend the conveyor to your needed dimensionPrice plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: Construction year: 1999co ...
Kannegiesser belt conveyor Belt conveyor GF 1000-680-600 RA1302 The Kannegiesser conveyor belt is from 2017 and is in good (used) condition. The belt conveyor has a 400V motor MKM TYPE-1 681.015 with frequency converter to regulate the conveyor speed. The shown supports are included in the delivery. Technical data: conveying length (NL): 1000 mmFramework width (NB): approx 680 mmbelt width (GuB): 600 mmHeight / Belt run (BH): 685 mm +/- 100 mmNumber of support feet: 2 piecesConveying speed (v m/s): adjustable up and down with frequency converterDrive: Normal MotorElectrical data: 400V / 50Hz / 0,37kWDeflection drum (UT): Ø = 60 mmBelt: 2-layer PVC belt, grey, smoothYear of construction: 09/2017 Special feature / accessories: 1x MKM TYPE-1 681.015/4 with frequency converter1x emergency stop switch on one side under scaffolding, center2x light barrier2x deflection drum cover All prices ...
Interroll Rising falling Incline belt conveyor with leading belt GF 4778 (3888+890)-690-580 RA2365Technical data:Conveyor length (NL): 4778 mm ( 3888 mm riser segment + 890 mm leading )frame width (NB): 690 mmbelt width (GuB): 6580 mmOverall height (BH): 120 mm, 360 mm with motorSupporting feet: optionally availableConveying speed (v m/s): 0.6Drive: SEW gear motorElectrical data: 50Hz V380-500, kW 0,75 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2022condition: AusstellungsstückConveying length in mm: 4778 (3888+890)Nominal / outside width in mm: 690Belt width in mm: 580Driven: YESEngine type: SEW Eurodrive Zentralantr ...
Interroll Rising falling Incline belt conveyor with leading belt GF 7028 (6138+890)-690-580 RA2366Technical data:Conveyor length (NL): 7028 mm ( 6138 mm riser segment + 890 mm leading )frame width (NB): 690 mmbelt width (GuB): 6580 mmOverall height (BH): 120 mm, 360 mm with motorSupporting feet: optionally availableConveying speed (v m/s): 0.6Drive: SEW gear motorElectrical data: 50Hz V380-500, kW 0,75 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2022condition: AusstellungsstückConveying length in mm: 7028 (6138+890)Nominal / outside width in mm: 690Belt width in mm: 580Driven: YESEngine type: SEW Eurodrive Zentralantr ...
Interroll Rising falling Incline belt conveyor with leading belt GF 19782 (810+175+17907+890)-690-580RA2363Technical data:Conveyor length (NL): 19782 mm ( 810 + 175 mm arch + 17907 mm riser segment + 890 mm leading )frame width (NB): 690 mmbelt width (GuB): 6580 mmOverall height (BH): 120 mm, 360 mm with motor Angle: 15°Supporting feet: optionally availableConveying speed (v m/s): 0.6Drive: SEW gear motorElectrical data: 50Hz V380-500, kW 0,75 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2022condition: AusstellungsstückConveying length in mm: 19782 (810+175+17907+890)Nominal / outside width in mm: 690Belt width in mm: ...
Interroll Rising falling Incline belt conveyor with leading belt GF (810+175+2800+890)-690-580RA2362Technical data:Conveyor length (NL): 4675 mm ( 810 + 175 mm arch + 2800 mm riser segment + 890 mm leading )frame width (NB): 690 mmbelt width (GuB): 6580 mmOverall height (BH): 120 mm, 360 mm with motor Angle: 15°Supporting feet: optionally availableConveying speed (v m/s): 0.6Drive: SEW gear motorElectrical data: 50Hz V380-500, kW 0,55 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2022condition: AusstellungsstückConveying length in mm: 4675 (810+175+2800+890)Nominal / outside width in mm: 690Belt width in mm: 580Driven: ...
FAS discharge flap belt conveyor GF 1380-800-600 RA2419 Technical data: Conveyor length (NL): 1380 mm (800 mm conveyor belt + 580 mm flap)Frame width (NB): 800 mmBelt width (GuB): 600 mmConstruction height (BH): 435 mmsupport feet: optionally availableConveying speed (v m/s): adjustable between 0,025 and 0,883 m/s with frequency converterDrive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.25 lifting and 0.37 conveyor beltSide guide distance: 655 mmMaximum recommended package size: 600 x 450 mm Optionally available:Supports to increase the delivery heightFrequency converter Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 WürzburgFeatures: condition: good (used)Conveying length in mm: 1380Nominal / outside width in mm: 800Belt width in mm: 600Driven: YESEngine type: SEW GetriebemotorKW: 0,25/S1, 0,37/S1scope of delivery: including side guides without suppo ...
Transnorm conveyor belt GF 14800-700-600RA2196Technical data:Conveyor length (NL): 14800 mm frame width (NB): 700 mm, 800 mm with motorbelt width (GuB): 600 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): 0,25 or 0,42Drive: SEW gear motor, R27 DT80N4/THElectrical data: 50Hz V380-500, kW 0,75 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2014condition: good (used)Conveying length in mm: 14800Nominal / outside width in mm: 700Belt width in mm: 600Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 0,75/S1Conveyor speed m / s: 0,25, 0,42scope ...
Supports for conveyor belt or roller conveyor RA2004Feet adjustable or made according to measure+/- 50-100 mm height adjustablePrice plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: For individual, expert advice, simply get in touch with us.Simply contact us by phone or email.We will be happy to help you plan and implement your projects.We look forward to hearing from you.With kind regardsYour team at Dr. Sonntag GmbH & Co. KGYour specialist and contact for intralogistics
Transnorm belt curve conveyor left GKF 90°-700-500-IR750 - NEW with STORAGE MARKS (RUST) RA2418 Technical data:Frame width (NB): 700 mmFrame width with Bearing cover and motor: 900 mmbelt width (GuB): 500 mmheight (BH): 220 mm height with motor (MH): 350 mmInner radius (IR): 750 mmConveying angle: 90° degreesConveying speed (v m/s): 0,25 m/sDrive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1Year of construction: 2017Condition: unused, but has marks from storage, as can be seen in the photos Optionally available:SupportsFrequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 WürzburgFeatures: Construction year: 2017condition: neu mit LagerspurenNominal / inner radius in mm: 750Nominal / outside width in mm: 700Belt width in mm: 500angle: 90°Driven: YESRunning direction: LINKSEn ...
Transnorm belt conveyor GF 25000-1000-900RA2416Technical data:Conveyor length (NL): 25000 mmframe width (NB): 1000 mm, 1100 mm with motorbelt width (GuB): 900 mmOverall height (BH): 80 mm, 430 mm with motorSupporting feet: optionally availableConveying speed (v m/s): 0,2Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 1998condition: good (used)Conveying length in mm: 25000Nominal / outside width in mm: 1000Belt width in mm: 900Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 2,2Conveyor speed m / s: 0,2scope of delivery: without supports an ...
Z455 Конвеєрна стрічка заготовки автоматичного токарного верстата з ЧПУ WEBO Довжина стрічки шириною 80 ммx, тканинна стрічка 450 мм відсутня Привід 380 В на двигуні з вимкненим і включеним тумблером Т-подібний паз з обох боків Розміри Д1550 х Ш300 х В150мм Вага приблизно 20 кг Ціна EXW без урахування ПДВ Попередній продаж та помилки за винятком 600 євро.--
Transnorm belt curve conveyor right 90°-885-700-IR400 RA1830 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data:Conveying length middle radius (NL): 1178 mmFrame width (NB): 885 mmbelt width (GuB): 700 mmheight (BH): 170 mm height including motor (MH): 370 mm Inner radius (IR): 400 mmConveying angle: 90° degreesConv ...
Transnorm belt conveyor hinged belt diverter 3000x1120x1000 RA2286 Technical data: Conveyor length (NL): 3000 mm Belt body (NB): 1120 mm Belt width (GuB): 1000 mm Overall height/transfer height (BH): 1050 mm +100 mm adjustment range Minimum transfer height: 500 mm Maximum transfer height: 1600 mm Basic dimensions: 3000x1300 mm Tilt height difference: 1100 mm Conveying speed (v m/s): 1.5 m/s Lifting/lowering speed: 1.8 s /1.2 s Drive: Nord geared motor Electrical data: Conveyor belt motor: 50Hz V380-500, kW 1.5 / S1 Tilting motor: 50Hz V220/400, kW 3.0 / S1 Idler pulley (UR): Ø = 80/120 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Optionally available: Frequency converter for stepless speed control Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 WürzburgFeatures: Construction year: 2020condition: newConveying length in mm: 3000Nominal / outside width ...
Transnorm conveyor belt GF 16950-900-750RA2213Technical data:Conveyor length (NL): 16950 mm frame width (NB): 900 mm, 1000 mm with motorbelt width (GuB): 750 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): 0,25Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LNElectrical data: 50Hz V380-500, kW 1,1 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2014condition: good (used)Conveying length in mm: 16950Nominal / outside width in mm: 900Belt width in mm: 750Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 1,1/S1Conveyor speed m / s: 0,25scope of de ...
Transnorm Rising falling Incline with arch belt conveyor GF 6000+800-700-600RA2181Technical data:Conveyor length (NL): 6800 mm (6000 mm incline + 800 mm arch)frame width (NB): 700 mm, 800 mm with motorbelt width (GuB): 600 mmOverall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15°Supporting feet: optionally availableConveying speed (v m/s): 0,42Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LNElectrical data: 50Hz V380-500, kW 0,75 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed controllAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2014condition: good (used)Conveying length in mm: 6800 ( 6000 + 800 )Nominal / outside width in mm: 700Belt width i ...
