saw blade diameter: 450 mm capacity 90 degrees: round: 130 mm capacity 45 degrees: round: 100 mm capacity 90 degrees: flat: 210 x 170 mm capacity 45 degrees: square: 145 x 170 mm turning speeds: 2900 U/min total power requirement: 2,3 kW weight of the machine ca.: 600 Kg dimensions: 4,0 x 1,5 x 1,5 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic machine - Pneumatic workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 16.0 - 90.0 mm width of the strips: 100 mm band length: 1250 mm grinding band dimension: 100 x 1250 mm total power requirement: 2.2 kW weight of the machine ca.: 180 kg. range L-W-H: 1200 x 600 x 1150 mm The TUGRA TT 90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery incl. storage area - rear of the machine - easy manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
스트립 너비: 200 mm 밴드 길이: 1600 mm 튜브 직경: 38 - 170 mm 연결된 부하 주파수: 400V 총 전력 요구 사항: 3,0kW 기계 무게 ca.: 0,25 t 기계 치수 ca.: 1,4 x 0,8 x 1,35 m 11개의 샌딩 롤러가 있는 파이프 연삭기: 38 - 42 - 48 - 52 - 60 - 74 - 90 - 102 - 116 - 138 - 170mm 파이프 클램핑 영역 170mm 문서(영어)
width of the strips: 100 mm band length: 1250 mm band speed: m/sec tube diameter: 16,5 - 90 mm angle adjustable from - to: 0 - 65 Grad connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0,18 t dimensions of the machine ca.: 1,2 x 0,6 x 1,3 m ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm Documentation (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mm band length: 2000 mm band speed: m/sec tube diameter: 16,5 - 76 mm angle adjustable from - to: 0 - 65 Grad connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0,17 t dimensions of the machine ca.: 1,3 x 0,7 x 1,1 m ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
단단한 둥근 재질 : 30 / 900 mm 정사각형 재질 솔리드 : 30 / 900 mm 앵글 스틸 : 35X35X5 / 600 mm T - 스틸 - 바깥쪽으로 웹 : 50x6 / 600 mm 축 직경 : 40 mm 작동 속도 : 4.5 m / min 롤 직경 : 148 mm 총 전력 요구 사항 : 1.1 kW 기계 무게 약 : 0.3 t 공간 요구 사항 약 : 0.75 x 0.6 x 1.4 m 전기 프로파일 롤러 - 옵션 수평 또는 수직 작업 - 경화 표준 롤러 1 세트 - 하부 2 롤러는 구동 됩니다 - 직경 33.7mm / 1- 작동 지침 용 플라스틱 롤러 1 세트 - 풋 스위치 왼쪽 / 오른쪽 및 비상 정지 데이터 f & uuml,이 광고는 ModulMWS - LogoTech oHG의 기계 관리로 만들어졌습니다.
