Одностоечные эксцентриковые прессы

pressure: 100 tthroat: 350 mmstroke: 20 - 120 mmtable size: 1100 x 700 mmram head dimension: 750 x 450 mmram adjustment: max. 90 mmno. of strokes: 70 Hub/minstrokes - infinitely variable: 20 - 120 Hub/mindaylight, max. stroke above - ram adjustment above: 500 mmhole in the table: 400 x 300 mmhole in bolster plate: 220 x 180 mmBreakthrough in column back: 450 x 300 mmtotal power requirement: 11 kWweight of the machine ca.: 11,8 tdimensions of the machine ca.: 2,1 x 1,3 x 2,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 200 mmstroke: 4 - 80 mmtable surface area: 520 x 400 mmno. of strokes: 160 Hub/minforce: Dauerlauf 1765 J dayligth: 302 max mmdayligth: 100 min mmadjustment of stroke: 8-84 mmram adjustment: 55 mmram surface: 185 x 180 mmram hole: 40 H7 mmforce: 3530 J hole in the table: 210 x 170 mmwidth of T-slots: 22 mmconnected load: 3,5 kWrated current: 9 frequency: 50 Hzvoltage: 380 Vweight of the machine ca.: 2700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 200 mmstroke: 4 - 80 mmtable surface area: 520 x 400 mmno. of strokes: 160 Hub/minram surface: 160 x 160 mmram adjustment: 40 mmram hole: 32 H7 mmhole in the table: 200 x 150 mmclamping plate: 500 x 380 x 60 mmtotal power requirement: 2,7 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,3 x 1,0 x 1,85 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 200 mmstroke: 4 - 80 mmtable-size: 520 x 400 mmno. of strokes: 160 Hub/minwork capacity during endurance run: 1370 Nmforce: 2740 Einzelhub adjustment of stroke: 4 - 80 mmram adjustment: 40 mmram surface: 160 x 160 mmhole in the table: 200 x 150 mmclamping plate: 500 x 380 x 60 mmhole in the table: 80 mmweight of the machine ca.: 1,9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tthroat: 225 mmstroke: 8 - 84 mmtable surface area: 580 x 450 mmram adjustment: 55 mmno. of strokes: 130 Hub/minram surface: 185 x 180 mmram hole: 40 mmhole in the table: 210 x 450 mmclamping plate: 570 x 450 mmtotal power requirement: 3,5 kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 1,4 x 1,1 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tthroat: 225 mmstroke: 8-84 mmTable dimensions: 580 x 450 mmram adjustment: 55 mmno. of strokes: 130 Hub/minram surface: 185 x 180 mmram hole: 40 H7 mmhole in the table: 210 x 170 mmT-slots: 22 clamping plate: 570 x 450 x 65 mmtotal power requirement: 3,5 kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 1,4 x 1,1 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tthroat: 225 mmstroke: 8-84 mmTable dimensions: 580 x 450 mmram adjustment: 55 mmno. of strokes: 130 Hub/minram surface: 185 x 180 mmram hole: 40 H7 mmhole in the table: 210 x 170 mmT-slots: 22 clamping plate: 570 x 450 x 65 mmtotal power requirement: 3,5 kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 1,4 x 1,1 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 tthroat: 250 mmstroke: 10-90 mmtable-size: 640 x 495 mmno. of strokes: 120 Hub/minram adjustment: 55 mmram surface: 290 x 210 mmram hole: 40 H7 mmhole in the table: 220 x 190 mmT-slots: 22 clamping plate: 620 x 485 x 65 mmtotal power requirement: 4,5 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: 1,5 x 1,2 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 tthroat: 250 mmstroke: 10-90 mmtable-size: 640 x 495 mmno. of strokes: 120 Hub/minram adjustment: 55 mmram surface: 195 x 210 mmram hole: 40 H7 mmhole in the table: 250 x 190 mmT-slots: 22 clamping plate: 620 x 485 x 65 mmtotal power requirement: 4,5 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: 1,5 x 1,2 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 tthroat: 250 mmstroke: 10-90 mmtable-size: 640 x 495 mmno. of strokes: 120 Hub/minram adjustment: 55 mmram surface: 290 x 210 mmram hole: 40 H7 mmhole in the table: 220 x 190 mmT-slots: 22 clamping plate: 620 x 485 x 65 mmtotal power requirement: 4,5 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: 1,5 x 1,2 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Давление: 15 тГорловина: 160 мм Ход поршня: 6 - 60 мм Регулировка плунжера: 60 мм Количество ходов: 120 Ступица/минРегулировка высоты стола: 150 мм Площадь поверхности стола: 500 x 350 мм отверстие для плунжера: 30 ммобщая потребляемая мощность: кВтВес машины ок.: 850 кггабариты станка ок.: 0,75 x 0,85 x 1,75 �

Давление: 8 т Горловина: 115 мм Ход поршня: 8-56 мм Плунжер - Диапазон регулировки: 30 мм Площадь поверхности стола: 390x230 мм Поверхность плунжера: 155x125 мм Отверстие в столе: 105x75 мм Высота стола: 820 мм Отверстие для инструмента в плунжере: 35 мм Вес станка ок.: 800 кгГабариты станка ок.: 1000x1000x1800 м�

Давление: 16 т Горловина: 185 мм Ход поршня: 8-60 мм Количество ходов: 140 Хаб/мин Плунжер - Диапазон регулировки: 50 мм Площадь поверхности стола: 500x340 мм Поверхность плунжера: 230x155 мм Отверстие в столе: 160 мм Высота стола: 800 мм Отверстие в столе: 35 ммВес машины ок.: 1,5 тГабариты машины прибл.: 1200x1200x2000 м�

давление: 15 тгорловины: 190 ммход: 6-80 ммход: 8-60 ммнет. Ход поршня: 140 Ступица/минрама - диапазон регулировки: 60 ммПлощадь поверхности стола: 590x400 ммПоверхность рамы: 230x180 ммОтверстие в столе: 200x140 ммВысота стола: 800 ммИнструментальное отверстие в раме: 40 ммВес станка ca.: 1 тРазмеры станка ca.: BxTxH 1000x1000x2000 м�

Bret PCK 160 tonCapacity: 160 ton Deph of throat: 405 mm Max adjustable stroke: 20 > 200 mm Workingspeed: 40 > 80 strokes/min Passage between uprights: 960 mm Max ram adjustment: 150 mm Electric motor (power): 22 kW Length : 2050 mm Depth : 2235 mm Hight: 4200 mm Weight: 18 ton

pressure: 80 tthroat: 250 mmstroke: 5/95 mmtable surface area: 805 x 510 mmdistance table/ram: Hub unten - 400 mmtool hole in ram: 45 mmram adjustment: 100 mmram surface: 360 x 300 mmno. of strokes: 55 Hub/mintotal power requirement: 5,5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 0,83 x 1,7 x 2,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

давление: 25 т горло: 200 мм ход: 4 - 80 мм Площадь поверхности стола: 595 x 410 мм Регулировка плунжера: 70 мм Количество ходов: 150 Ступица/мин Регулируемый по высоте стол: 240 ммОбщая потребляемая мощность: 1,1 кВтВес машины ок.: 1,45 тРазмеры машины Д x Ш x В: 1,30 x 0,80 x 2,0 �

pressure: 50 tthroat: 250 mmstroke: 8-120 mmno. of strokes: 115 Hub/minram - range of adjustment: 70 mmtable surface area: 650x510 mmram surface: 400x180 mmhole in the table: Ø 180 mmtable height: 850 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4 tdimensions of the machine ca.: BxTxH 1500x2500x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 75 t

Спецификации: Грузоподъемность 75 тонн Частота ходов 90 ударов Вылет 300 мм Ход плунжера 16 - 140 мм Регулировка плунжера 80 мм Размер стола прибл. 800 x 600 мм Высота установки макс. ок. 400 мм

pressure: 75 tthroat: 300 mmstroke: 16-140 mmno. of strokes: 105 Hub/minram - range of adjustment: 80 mmtable surface area: 800x600 mmram surface: 650x260 mmhole in the table: Ø180 mmtable height: 920 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4,5 tdimensions of the machine ca.: BxTxH 1500x2500x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: 320 mmstroke: 8-140 mmno. of strokes: 30-120 Hub/minram - range of adjustment: 100 mmtable surface area: 900x620 mmram surface: 600x320 mmhole in the table: 315x180 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 7,3 tdimensions of the machine ca.: BxTxH 1500x2000x2750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Спецификации: Грузоподъемность 50 тонн Частота ходов 115 об/мин Вылет 250 мм Ход плунжера 8 - 120 мм Регулировка плунжера прибл. 70 мм Стол, ШxГ прибл. 650 x 500 мм Диарея och ок. 250 x 180 мм

pressure: 100 tthroat: 325 mmstroke: 10-110 mmno. of strokes: 100 Hub/minram - range of adjustment: 80 mmtable surface area: 900x630 mmram surface: 500x315 mmhole in the table: 325x225 mmtable height: 800 mmtool hole in ram: Ø 50 mmdimensions: BxTxH mmweight of the machine ca.: 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Давление: 75 т Расширение: 300 мм Размер таблицы: 620 x 800 мм Диарея в таблице: 225 x 325 мм Настройка таблицы: 175 мм Поверхность пестля: 180 x 475 мм Завершение удара: 80 мм Регулировка хода: 16 - 140 мм Мощность удара: 90 /мин Двигатель привода: 380 В, 3 кВт Потребность в пространстве: 1700 x 1200 x 2500 мм Вес: 3300 кг

pressure: 80 tthroat: 300 mmstroke: 6 - 140 mmram adjustment: 100 mmno. of strokes: 60 Hub/mintable surface area: 900 x 620 mmram surface: 600 x 280 mmtotal power requirement: 14 Aweight of the machine ca.: 7,6 tdimensions of the machine ca.: BxTxH 1,38 x 2,1 x 2,56 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 tthroat: 305 mmstroke: 16-140 mmno. of strokes: 80/105 Hub/minram - range of adjustment: 80 mmtable surface - upper: 800x600 mmram surface: 470x180 mmhole in the table: Ø 150 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 5 tdimensions of the machine ca.: BxTxH 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 340 mmstroke: 8-140 mmno. of strokes: 50 Hub/minram - range of adjustment: 110 mmtable surface area: 1000x700 mmram surface: 650x450 mmhole in the table: Ø 180 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 10,5 tdimensions of the machine ca.: BxTxH 2300x1600x3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 tthroat: 450 mmstroke: 20-200 mmno. of strokes: 60/80 Hub/minram - range of adjustment: 110 mmtable surface area: 1000x880 mmram surface: 900x450 mmhole in the table: 400x200 mmtable height: 850 mmtool hole in ram: Ø 50 mmtotal power requirement: 15 kWweight of the machine ca.: 13,5 tdimensions of the machine ca.: BxTxH 1600x2700x3400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tthroat: 270 mmstroke: 4-100 mmno. of strokes: 130 Hub/minram - range of adjustment: 80 mmtable surface area: 670x540 mmram surface: 460x300 mmhole in the table: Ø 100 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 6 tdimensions of the machine ca.: BxTxH 1500x2300x3300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 300 mmstroke: 8-140 mmno. of strokes: 70 Hub/minram - range of adjustment: 100 mmtable surface area: 750x620 mmram surface: 500x340 mmhole in the table: Ø 180 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 7,5 tdimensions of the machine ca.: BxTxH 2100x1500x3300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Усилие сжатия: 25 т Проекция: 200 мм Размер стола: 450 х 600 мм Отверстие в столе: 100 x 210 мм Регулировка стола: 240 мм Регулировка плунжера: 70 мм Регулировка хода: 4 - 80 мм Частота вращения: 150 об/мин Приводной двигатель: 380 В, 1,1 кВт Требования к пространству: 1300 x 800 x 2000 мм Вес: ок. 1450 кг

Усилие сжатия: 25 т Проекция: 200 мм Размер стола: 450 х 600 мм Регулировка стола: 240 мм Регулировка плунжера: 70 мм Регулировка хода: 4 - 80 мм Частота вращения: 150 об/мин Приводной двигатель: 380 В, 1,1 кВт Требуемое пространство: 1600 x 850 x 2000 мм Вес: ок. 1450 кг

pressure: 75 tthroat: 310 mmstroke: 16-140 mmno. of strokes: 105 Hub/minram - range of adjustment: 80 mmtable surface area: 800x610 mmram surface: 600x175 mmhole in the table: Ø 170 mmtable height: 820 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4 tdimensions of the machine ca.: 1500x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 345 mmstroke: 20-100 mmno. of strokes: 60 Hub/minram - range of adjustment: 85 mmtable surface area: 980x650 mmram surface: 600x440 mmhole in the table: Ø 200 mmtable height: 820 mmtool hole in ram: ¤7 65 mmweight of the machine ca.: 7 tdimensions of the machine ca.: 2000x2000x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

давление: tгорло: мм ход: ммобщая потребляемая мощность: 23 кВтвес машины ок.: тгабариты машины ок.: �

Давление: 400 т горловина: 400 мм ход поршня: 40 - 140 мм Количество ходов - холостой ход: 32 мин-1 Регулировка плунжера: 125 мм Площадь поверхности стола: 1250 x 750 мм дневной режим: мин/макс. 450/590 мм общая потребляемая мощность: 31,5 кВт Вес машины: 23 тГабаритные размеры: 3,7 x 1,7x 3,9 м�

Усилие сжатия: 80 т Проекция: 350 мм Размер стола: 700 x 720 мм Уровень диареи в таблице: 160 мм Площадь плунжера: 300 x 445 мм Регулировка плунжера: ок. 80 мм Регулировка хода: 8 - 100 мм Частота хода: около 90 об/мин Приводной двигатель: 380 В, ок. 5 кВт Размеры: 2050 x 1100 x 2450 мм Вес: ок. 3800 кг

Давление: 65 т - Удар: 140 мм - Размер таблицы: 720 x 600 мм - Stoesselflaeche: 500 x 300 мм - Стоессельв творение: 80 мм - Хюбе: 20 - 40 за минуту. - Маш. Вес: 6000 кг - Требования к комнате (L x W x H): высота 3,1 м - Зажим контактный отверстие 60 х 80 мм Дополнительная информация по запросу

pressure: 100 tthroat: 350 mmstroke: 8 - 100 mmno. of strokes: 60 Hub/mindaylight (stroke down, ram adjustment above): 300 mmram adjustment: manuell 80 mmtable surface area: 850 x 700 mmhole in the table: Dm. 180 mm mmram surface: 560 x 400 mmram drills x depth: 40 x 95 mmtable height over floor: 850 mmtotal power requirement: 7,5 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 1,4 x 2,2 x 2,85 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Давление: 100 т Расширение: 350 мм Размер таблицы: 690 x 840 мм Диарея в таблице: 160 мм Настройка таблицы: Поверхность пестля: 450 x 600 мм Завершение удара: 80 мм Регулировка хода: 8 - 100 мм Мощность удара: 60 /мин Двигатель привода: 380 V, 5.5 кВт Потребность в пространстве: 1850 x 1850 x 2650 мм Вес: 6800 кг

pressure: 125 tthroat: 360 mmstroke: 20 - 130 mmtable surface area: 920 x 690 mmram surface: 580 x 400 mmno. of strokes: 60 Hub/minram adjustment: 80 mmhole in the table: 200 mmtool hole in ram: 50 mmdaylight (stroke down, ram adjustment above): 500 mmtotal power requirement: 11 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: B 1,32 x T 1,8 x H 2,82 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 tthroat: 230 mmstroke: 12-84 mmno. of strokes: 135 Hub/minram - range of adjustment: 70 mmtable surface area: 600x460 mmram surface: 340x170 mmhole in the table: 220x130 mmtable height: 800 mmtool hole in ram: Ø 35 mmweight of the machine ca.: 2,5 tdimensions of the machine ca.: 1800x1800x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 300 mmstroke: 20 - 128 mmram - range of adjustment: 80 mmstrokes per minute: 60 - 90 table surface area: 920 x 600 mmram surface: 540 x 290 mmhole in the table: 315 x 180 mmdaylight, max. stroke above - ram adjustment above: 520 mmtool hole in ram: Dm. 50 mmtotal power requirement: kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 1,8 x 1,7 x 2,2 mFurnishing:- Gear transmission- fixed table- Triple bearing shaft- semi-automatic stroke adjustment- hydraulic clutch-brake combination- hydraulic overload (modern unit mounted on the stand on the left)- Hydraulic unit with oil cooler for clutch mounted on the left side of the stand- Ball spindle adjustment using a ratchet- automatic central lubrication VOGEL- Operating instructions / CE declaration availableMachine is partially overhauled in our company as follows:- dismantled, cleaned and completely tech ...

pressure: 100 tthroat: 300 mmstroke: 20 - 124 mmstrokes per minute: 60/90 ram adjustment: 85 mmtable surface area: 920 x 600 mmram surface: 540 x 290 mmdaylight, max. stroke above - ram adjustment above: max. 440 mmhole in the table: 290 x 170 mmtool hole in ram: Dm. 50 mmtotal power requirement: 6,5 - 8,5 kWweight of the machine ca.: 5,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 tthroat: 295 mmstroke: 20-120 mmno. of strokes: 60/90 Hub/minram - range of adjustment: 85 mmtable surface area: 920x580 mmram surface: 540x280 mmhole in the table: 300x180 mmtable height: 830 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,1 tdimensions of the machine ca.: BxTxH 1500x2000x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 tthroat: 300 mmstroke: 20-120 mmno. of strokes: 60/90 Hub/minram - range of adjustment: 85 mmtable surface area: 920x560 mmram surface: 540x280 mmhole in the table: 320x190 mmtable height: 800 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,6 tdimensions of the machine ca.: 2000x2000x2600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tthroat: 350 mmstroke: 20-120 mmno. of strokes: 50 / 75 Hub/minram - range of adjustment: 85 mmtable surface area: 1150x670 mmram surface: 800x380 mmhole in the table: 330x200 mmtable height: 800 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 8 tdimensions of the machine ca.: BxTxH 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 tthroat: 300 mmstroke: 8 - 110 mmtable surface area: 750 x 600 mmram adjustment: 75 mmram surface: 430 x 230 mmhole in the table: 250 x 150 mmtool hole in ram: 40 mmno. of strokes: 60 + 90 Hub/minweight of the machine ca.: 4,4 ttotal power requirement: 4,5 - 6,8 kWdimensions of the machine ca.: 1,95 x 1,1 x 2,35 mdistance table/ram: Hub unten, Stöß. unten 19 mmdistance table/ram: Hub oben, Stöß. oben 380 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tthroat: 350 mmstroke: 20-120 mmno. of strokes: 40-60 Hub/minram - range of adjustment: 85 mmtable surface area: 1050x690 mmram surface: 650x320 mmhole in the table: 325x200 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 8,6 tdimensions of the machine ca.: 2500x2500x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 tthroat: 250 mmstroke: 6/98 mmram adjustment: 75 mmno. of strokes: 60/90 Hub/mintable height adjustment: 150 mmtable surface area: 695 x 500 mmtotal power requirement: kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 0,9 x 1,6 x 2,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.