We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
б/у
length: 1980 mmwidth: 670 mmheight over floor: 850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
б/у
Description: ESSEPIGI MODULA 300 Drilling and Dowel Inserting MachineApprox. Onsite Dimension. (l x w x h): 1,260 x 1,400 x 2,000 mm, weight approx.: 1,200 kg
б/у
Description: KOCH CENTRONIC Sawing, Drilling and Dowel Inserting MachineApprox. Onsite Dimension. (l x w x h): 5,520 x 2,030 x 2,170 mm, weight approx.: 4,500 kg
б/у
Description: Gluing System EVA Hotmelt Corner Rounding Unit , Max Panel Width 210 mm Min. panel height 10 mm Max. panel height 30 mm Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mm Edge coil magazine , NO. EDGE PROCESSING UNITS 1 Processing Unit : fine trimming to trim and roundApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
б/у
Description: Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mmApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
б/у
Description: Min. panel length 110 mm Max. panel length 800 mm Max. panel width 1250 mm No. Top clamps 6 no. bottom vertical units 1 with positioning by NC spindles for vertical boring 1 No. injectors 2 No. storage tank 1 Item inserted wooden dowels Control system KOCH NUMERIC Safety standard CE mark Safety photocellsApprox. Onsite Dimension. (l x w x h): 3,000 x 1,750 x 2,200 mm, weight approx.: 3,000 kg
б/у
Description: Min. panel length 150 mm Max. panel length 800 mm Min. panel width 230 mm Max. panel width 3200 mm Max. forward feed speed 70 m/min No. Top clamps 4 no. bottom vertical units 6 , motor power 1.3 KW r.p.m. 7000 RPM No. injectors 6+6 No. storage tank 2 Item inserted , wooden dowels , wooden dowels 8/10 mm TOOLS NOT INCLUDEDApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
б/у
Description: POLYMAC F/S.E Drilling and Dowel Inserting Machine dowel injection unit - 5 x 8 mm dowels drilling units horizontal - 21 drilling units vertical - no material clamping - 4 dowel injection unit: 5 x 8 mm dowels, material clamping: 4, Approx. Onsite Dimension. (l x w x h): 1,770 x 1,160 x 2,280 mm, weight approx.: 700 kg
б/у
ORF Универсальные 5 шпинделей
б/у
Сверлильный станок Schleicher Универсальный сверлильный станок Тип BORFIX С поворотной сверлильной штангой Сверлильный аппарат с 9 сверлами 1,5 кВт 2 пневматических держателя заготовок Сверла сверху и сзади Размер подушки 1000 мм x 530 мм Длина стопорного рельса 2000 мм Вес с поддоном 185 кг Размеры транспортировки 1200 мм x 1020 мм x В 1700 мм
б/у
Сверлильный станок SCM модели TOP29: - 29-шпиндельная головка с быстроразъемным соединением - Регулируемое сверление от 0 до 90° от верхней вертикали до горизонтали - Моторизованное движение сверлильной головки - 6-позиционный револьвер глубины сверления - 4 пневматических зажима для удержания деталей - в комплекте с алюминиевыми направляющими ДОСТУПНОСТЬ С АПРЕЛЯ 2024 Г.
б/у
Description: For drilling of glazing bars and frames, door components and sash joints 10 different drilling programmes Drilling head with 2 spindles Drilling stroke: max 80 mm Pneumatic workpiece hold-down device Right and left length stop  ,drilling units horizontal: 1 pieces, packing measure approx (l x w x h): 1,300 x 1,400 x 1,650 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 1,400 x 1,600 mm, weight approx.: 400 kg
б/у
Description: Max. panel width 1300 mm No of Bottom Units 1 No of injectors 1 bottom vertical units horizontal units Max. panel width 1300 mm No. Top clamps 4 spindles for horizontal boring 2  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , motor power 0.55 KW r.p.m. 2700 RPM Item inserted yes wooden dowels wooden dowels 10X50 Safety standard CE mark  ,  ,  ,  ,  ,  ,  , ,Approx. Onsite Dimension. (l x w x h): 3,250 x 1,900 x 1,800 mm, weight approx.: 1,500 kg
б/у
Description: serial number 801325 center distance between each spindle 32 mm minimum and maximum distance between the vertical heads 96-2000 mm minimum lenght of the piece 240 mm max. working width 2500 mm min.working width between the vertical units 96 mm boring capacity maximum 27 cycles/min the drilling depth is adjustable 0-70 mm conveying speed 57 m/min spindle rotations per minute 2800 g/min engine capacity 2,5 (horizontal) 1,5 plus 1,5 (vertical) HP pressure 5-8 atm air consumption with 6 boring units 50 liter / cyle air consumption per head 7 liter / cyle feeding nominal tension 400 V, 50 Hz nominal current 30,8 A maximum overload current 0,104 kA Approx. Onsite Dimension. (l x w x h): 3,710 x 1,800 x 1,500 mm, weight approx.: 1,540 kg, Serial Number of Manufacturer: 801,325