Горизонтальные упаковочные машины типа флоу-пак

Профессиональная горизонтальная упаковочная машина от известного производителя. Подходит, например, для упаковки продуктов питания, сладостей, медицинских приборов, технических изделий, полиграфической и бумажной продукции, бытовых и игрушек, текстиля. Ширина упаковки: 35 – 100 мм Ilbuifcbkb Длина упаковки: 65 – 160 мм Высота упаковки: 5 – 35 мм Производительность: 35 – 200 упаковок в минуту Ширина пленки: 80 – 220 мм Вес машины: 450 кг Размеры машины: Длина 4,0 x Ширина 0,9 x Высота 1,6 м 220 В / 50 -60 Гц / 2,7 к� ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(48-60)xW(15-60)xH(5-30)mm | number of rotary knives: 5 p ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. Film feed from the top. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 350mm | 1 pendular knife | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 120 cycles/min | max. bag (not product) dimensions (mm): L(110-330)xW(30-130)xH(10-60) | machine dimensions (mm): L3670xW820xH1410 | weight (net/gross): 80 ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(45-55)xW(15-60)xH(5-30)mm | number of rotary knives: 6 p ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(48-60)xW(15-60)xH(5-30)mm | number of rotary knives: 6 p ...

Flowwrap machine - servo version - for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. No-product-no-bag function through servo control and servo motors. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device and splice unit (automatic change of film roll). - Technical specifications: max. film width: 450mm | 1 rotating knife | 220V, 3.2kW | no compressed air required | max. speed of the machine in neutral: 250 cycles/min | max. bag (n ...

Flowwrap machine - new design - for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 480mm | 1 rotating knife | 220V, 2.8kW | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): L(100-450)xW(50-210)xH(0-80) | machine dimensions (mm): L3990xW900xH1468 | weight (net/g ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 400mm | 1 rotating knife | 220V, 2.8kW | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): L(150-400)xW(50-180)xH(0-65) | machine dimensions (mm): L4020xW800xH1450 | weight (net/gross): 9 ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 350mm | 2 rotating knives | 220V, 2.6kW | no compressed air required | max. speed of the machine in neutral: 180 cycles/min | max. bag (not product) dimensions (mm): L((65-190)OR(120-280))xW(50-160)xH(0-40) | machine dimensions (mm): L4020xW770xH1450 | weight ( ...

Flowwrapping machine, especially to pack multipacks of normal or irregular shaped, dry products (also round or cylindric shapes). Including collection unit to collect the incoming products to multi pack units. Infeed table with automatic conveyor to bring the product to the packaging machine. Including special device to hold single products together for multi packs. Additional device in the sealing area running simultaniously with the product to keep single parts together. Precise and reliable function by using servo motors. Film feed from top. Automatic wrapping and sealing below the product. - Technical Specifications: 220V, 3,66kW | no compressed air required | max. speed of the machine in neutral: 200 cycles/min | max. product sizes: (mm) L(100-400)xW(10-40 or 40-80 or 80-150)xH(10-30 or 30-60) | maschine dimensions ca. (mm): L5000xW965xH1750 | weight (net/gross): 1000/1150kg. The m ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, small products. Infeed table with automatic transport through pushers into the machine. Film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 250mm | 2 rotating knives | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions (mm): L((65-190)OR(120-280))xW(30-110)xH(0-40) | machine dimensions (mm): L3920xW670xH1320 | weight (net/gross): 700/750kg. The machine has to operate with mi ...

Flowwrap machine - servo version - for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. No-product-no-bag function through servo control and servo motors. Infeed table with automatic transport through pushers into the machine. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device and splice unit (automatic change of film roll). - Technical specifications: max. film width: 350mm | 2 rotating knifes | 220V, 3.2kW | no compressed air required | max. speed of the machine in neutral: 300 cycles/min | max. bag (not product) dimensions (mm): L(65-6000)xW(50-160)xH(10-55) | machine dimensions (mm): L3750xW875xH1420 | weight (net/gross): 500/550kg.P ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, medium/larger products. Infeed table with automatic transport through pushers into the machine. Double supply belt with product separation by servomotor. The system operated by the servomotor pendulum blade allows unlimited product lengths. Film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 350mm | 1 pendular knife | 220V, 3.6kW | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product) dimensions (mm):  ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, small products. Infeed table with automatic transport through pushers into the machine. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 180mm | 3 rotating knives | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 330 cycles/min | max. bag (not product) dimensions (mm): L(50-115)xW(30-80)xH(0-35) | machine dimensions (mm): L3770xW670xH1450 | weight (net/gross): 700/750kg. The machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the OPP film.Please note that our new pri ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, small products. Infeed table with automatic transport through pushers into the machine. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical Specifications: max. film width: 180mm | 4 rotating knives | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 330 cycles/min | max. bag (not product) dimensions (mm): L(45-90)xW(30-80)xH(0-35) | machine dimensions (mm): L3770xW670xH1450 | weight (net/gross): 700/750kg. The machine has to operate with minimum of 30 cycles per minute to avoid premature melting of the OPP film.Please note that our new pri ...

Flowwrap machine - new design - for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. Film feed from the top. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 600mm | 1 pendular knife | 220V, 3.6kW | no compressed air required | max. speed of the machine in neutral: 40 cycles/min | max. bag (not product) dimensions (mm): L(120-450)xW(50-200)xH(10-110) | machine dimensions (mm): L4380xW970xH1500 | weight (net/gr ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(90-220)xW(15-60)xH(5-30)mm | number of rotary knives: 2  ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(80-170)xW(15-60)xH(5-30)mm | number of rotary knives: 3  ...

Flowwrap machine - new design - for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. Film feed from the top. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 450mm | 1 pendular knife | 220V, 3.2kW | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product): dimensions (mm): L(120-450)xW(50-160)xH(10-80) | machine dimensions (mm): L4380xW870xH1500 | weight ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(55-85)xW(15-60)xH(5-30)mm | number of rotary knives: 4 p ...

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches with regular and irregular shape and a corner spout. Suitable for small stand-up bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed and accordingly 2 charging hopper are mounted. The possibility to upgrade the machine with two additional dosing units and charging hoppers does exist, either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specif ...

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches with regular and irregular shape and a corner spout. Suitable for big stand-up bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(180-320)xW(100-240)mm | ...

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of chain bags (flat pouches) with regular or irregular shape, optional with hanging hole, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are continues filled per machine cycle, whereby a higher output will be achieved per minute. For the production process 2 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-180)xW(50-90)mm | filling capacity max. 100ml | max. speed of the machine in neutral: 150 cycles/minute | 4.5kW | 12m?/h | machine dimensions: (L)3 ...

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape, hanging hole optional, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-225)xW(65-120)mm | filling capacity: max. 180ml | max. speed of the machine in neutral: 75 cycles/minute (corresponds to max. 150 bags/min) | 5.5kW | 13m?/h | machine dimensions: (L)4290x(W)970x(H)1500 ...

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape, optional with hanging hole, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Three bags are handled per machine cycle (triplex filling), whereby a high output will be achieved per minute. 3 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): H(70-180)xW(50-90)mm | filling capacity: max. 100ml | max. speed of the machine in neutral: 230 cycles/minute | 10.5kW | 18m?/h | machine dimensions: (L)5650x(W)970x(H)1360mm | weight ...

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape, optional with hanging hole, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Four bags are handled per machine cycle (quadroplex filling), whereby a high output will be achieved per minute. 4 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(70-180)xW(50-90)mm | filling capacity: max. 100ml | max. speed of the machine in neutral: 78 cycles/Minute (corresponds to max. 310 bags/min) | 14kW | 24m?/h | machine dimensions: ...

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches with regular and irregular shape, with hanging hole, without zipper. Suitable for middle-sized stand-up bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.):  ...

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape, hanging hole optional, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for big bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc. ...

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape, hanging hole optional, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-220)xW(50-140)mm | filling capacity: max. 260ml | max. speed of the machine in neutral: 70 cycles/minute | 3.5kW | 6m?/h | machine dimensions: (L)2850x(W)970x(H)1500mm | weight: 900kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and/or other modules ...

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape, hanging hole optional, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(50-130)xW(50-110)mm | filling capacity: max. 60ml | max. speed of the machine in neutral: 70 cycles/minute | 2kW | machine dimensions: (L)2060x(W)750x(H)1400mm | weight: 520kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and/or other modules (such as c ...

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape and a spout on top. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(90-180)xW(50-80)mm | filling capacity: max. 100ml | max. speed of the machine in neutral: 75 cycles/minute (corresponds to max. 150 bags/min) | 4.5kW | 13m?/h | machine dimensions: (L)3550x(W)970x(H)1500mm | weight: 1800kg.  ...

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches with regular and irregular shape, with hanging hole, with a spout on top. Suitable for middle-sized stand-up bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-ma ...

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches with regular and irregular shape, with hanging hole, with zipper. Suitable for small stand-up bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed and accordingly 2 charging hopper are mounted. The possibility to upgrade the machine with two additional dosing units and charging hoppers does exist, either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature moni ...

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape, hanging hole optional, with zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-225)xW(65-120)mm | filling capacity: max. 180ml | max. speed of the machine in neutral: 75 cycles/minute (corresponds to max. 150 bags/min) | 6.5kW | 13m?/h | machine dimensions: (L)4900x(W)970x(H)1500mm  ...

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches with regular and irregular shape, with hanging hole, with zipper. Suitable for big stand-up bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(120-320)xW ...

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches with regular and irregular shape, with hanging hole, with zipper. Suitable for middle-sized stand-up bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second filling station (dosing unit and charging hopper) does exist, either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes ...

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape, hanging hole optional, with zipper. 3 side sealing or 4 side sealing adjustable. Suitable for middle-sized bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-225)xW(50-180)mm | filling capacity: max. 400ml | max. speed of the machine in neutral: 70 cycles/minute | 5.5kW | 12m?/h | machine dimensions: (L)4650x(W)970x(H)1500mm | weight: 1600kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and/or other m ...

Horizontal packaging machine for the automatic production, filling and sealing of flat pouches and stand-up pouches with zipper. Suitable for small flat and stand-up bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(90-225)xW(60-140)mm | filling capac ...

Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, stand-up) with a corner spout. Suitable for big pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(180-310)xW(110-210)mm |  ...

Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, stand-up) with a corner spout. Suitable for extra-large pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(120-320)xW(100-2 ...

Horizontal packaging machine, MINI VERSION, for premade stand-up pouches, block bottom pouches, flat bottom pouches and other doypack bag types. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder. - Specifications: stainless steel version (SS304) | max. speed of the machine in neutral: 7 cycles/minute | bag width: 100-300mm | bag length: 100-350mm | compressed a ...

Horizontal packaging machine, DUPLEX MINI VERSION, for premade stand-up pouches, block bottom pouches, flat bottom pouches and other doypack bag types. Duplex version with higher cycle rate. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder. - Specifications: stainless steel version (SS304) | max. speed of the machine in neutral: 25 cycles/minute | bag width: 1 ...

Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, stand-up) without zipper. Suitable for middle-sized pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed and accordingly 2 charging hopper are mounted. The possibility to upgrade the machine with two additional dosing units and charging hoppers does exist, either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Speci ...

Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, stand-up) without zipper. Suitable for large pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(110-310)xW(90-210)mm | fill ...

Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, stand-up) without zipper. Suitable for middle-sized pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-310)xW(60-180) |  ...

Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, stand-up) with a spout on top. Suitable for small pre-made bag. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-310)xW(60-180) | fil ...

Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, stand-up) with zipper. Suitable for middle-sized pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed and accordingly 2 charging hopper are mounted. The possibility to upgrade the machine with two additional dosing units and charging hoppers does exist, either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). - Specifications: pouch sizes (min.-max.): L(110-260)xW(90-180)mm | filling capacity: max. 1600ml | max. speed of the machine in neutral: 5 ...

Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, stand-up) with zipper. Suitable for extra-large pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(180-320)xW(100-240)mm |  ...

Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, stand-up) with zipper. Suitable for extra-large pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(120-400)xW(90-280)mm | f ...

Flow wrapping machine optimized for the packaging of dust masks such as FFB2 masks. High speed packaging of single masks or multipacks in series in transparent, printed or laminated OPP film. Feeding table with belt conveyor. Safe film feeding from the bottom for products with low stability. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions: L(120-280)xW(50-160)xH(0-40) mm | max. film width: 350mm | 1 rotating knife driven by servo motor | 220V, 2.8 kW | no compressed air required.Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different ...