Горизонтальные ленточные пилы (47)

Диапазон резки вокруг 0: 150 мм Площадь резания 0: 150 x 150 мм Площадь резки 0: 150 x 165 мм Диапазон резки вокруг 45: 115 мм Площадь резки 45: 115 x 130 мм Диапазон резки вокруг 60: 60 мм Площадь резки 60: 70 x 70 мм Рабочая высота около: 700 мм Размеры ленточной пилы: 1735 x 13 x 0,65 мм Скорость резания: 40 / 80 м/мин Выходная мощность двигателя S1 100%: 0,75 кВт Напряжение : 400 В Размеры машины: 1200 x 750 x 1250 мм Вес около: 85 кг Характеристики: • Для резки профилей, труб, твердых материалов из ВА, железа и цветных металлов • Для ре ...

Forte SBA 241 Automatic Band Saw Cutting diameter 10 - 250 mm Saw blade length 4,100 mm Cutting width 1.1 mm Max. section length 3 - 9,999 mm Cutting speed 11 - 110 m/min Saw blade dimensions 4,100 x 34 x 1.1 mm Total power requirement 1.4 kW Machine weight approx. 1.0 t Space requirements approx. 2.0 x 2.0 x 1.5 m Auction-ID: A7-47048-21

Диапазон резки вокруг 0: 150 мм Площадь резания 0: 150 x 150 мм Площадь резки 0: 150 x 165 мм Диапазон резки вокруг 45: 115 мм Площадь резки 45: 115 x 130 мм Диапазон резки вокруг 60: 60 мм Площадь резки 60: 70 x 70 мм Рабочая высота: 700 мм Размеры ленточной пилы: 1735 x 13 x 0,65 мм Скорость резания: 40 - 80 м/мин Выходная мощность двигателя S1 100%: 0,75 кВт Напряжение: 400 В Размеры машины: 1200 x 750 x 1250 мм Вес около: 85 кг Характеристики: • Для резки профилей, труб, твердых материалов из ВА, железа и цветных металлов • Для резки то� ...

Producer: KASTO, Type: HBA 420 AU, C93I8EN Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external Chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Dimensions (width x height x depth): approx. 400x200x350 cm Auction-ID: A1-47017-107

Диапазон резки вокруг 0: 127 мм Площадь реза 0: 125 x 130 мм Область резки вокруг 45 справа: 90 мм Площадь резки квадрат 45 справа: 90 x 90 мм Область резки вокруг 60 справа: 45 мм Площадь реза 60 справа: 45 x 45 мм Точечное отверстие: 130 мм Размеры ленточной пилы: 1440 x 13 x 0,65 мм Скорость резания: 30 - 80 м/мин Мощность двигателя: 0,55 кВт Напряжение: 230 В Вес около: 25 кг Характеристики: - Два уровня скорости резания для оптимальной адаптации к заготовке - Для резки торцов, пильный кронштейн может быть повернут до 6 ...

Producer: KASTO Type: HBA 420U Year of Make: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm Fully automatic NC horizontal band saw 1 chip conveyor, 1 external chip conveyor, 1 person. Driven Roller Conveyor approx. 450 cm. Auction-ID: A1-47017-106

Технические данные: - Диапазон резки на 90 около 260 мм - плоский 450 x 240 мм - Диапазон резки на 45 около 230 мм - плоский 240 x 200 мм - Машина установлена на оригинальном турникете - Пила диапазон размер 3660 х 25 х 0,9 мм - Скорость резки 20 / 35 / 50 / 70 м/мин - Гидр. подъем и опускание пилы - Резка давления бесконечно регулируемый 0 - 10 м/мин - Общая мощность привода 400 V / 0,8 кВт - Устройство для охлаждения - Космическое требование приблизительно. W 2100 x H 1200 x D 1000 мм - Вес приблизительно. 500 к�

Forte BA 321 Automatic Band Saw - With hydraulic clamping and feeding device - Cutting range around 320 mm - Square 300 x 300 mm - Large section length for single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Cutting speed infinitely variable 20 - 100 rpm - Feed speed hydraulically infinitely variable - Coolant device - Material support height 720 mm - Saw blade - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg Auction-ID: A7-47048-20

Режущая мощность около 90: 170 мм Площадь резки плоская 90: 140 x 210 мм Режущая мощность около 45: 125 мм Площадь резки плоская 45: 100 x 125 мм Рабочая обувь: 890 мм Размер Saegegegeand: 2080 x 20 x 0,9 мм Скорость резки: 20 - 90 м/мин Cue насос S1 100%: 100 Вт Мощность двигателя: 0,75 кВт Размеры машины (L x D x H): 1250 x 540 x 1600 мм Вес около.: 157 кг

Min. saw diameter 5 mm, max. saw diameter 260 mm, MEBA NC control, fast single cut at the touch of a button, MEBA roller belt 3000mm height adjustable, connected loads 380 V 16 A, hydraulic clamping pressure control for thin-walled components, mitre cut 40° - 90° stepless, WIKUS Marathon M42 saw blade, incl. 3x spare belts Auction-ID: A7-46993-2

Stored in working condition, with 2 new band saws. Auction-ID: A3-43535-17107

Auction-ID: A7-46691-37

Equipped with: separate length measuring device for 220 V, digital readout, loose feed table 5200x1000x1000mm, emergency stop, 2x saw, 2x top pressure, 2x chip roller Auction-ID: A1-41996-88

Machine type: Automatic Band Saw Manufacturer: KASTO Model: SSB 260 VA Control: Semi-automatic / automatic feed control panel Serial number: n/a Year: n/a Working hours: n/a Cutting capacity (round): approx. 260 mm Cutting capacity (flat): approx. 260 x 260 mm Feed system: Automatic material feed with clamping vice Saw type: Horizontal band saw Blade speed: Adjustable (see feed & speed chart on machine) Material feed: Hydraulic feed system Equipment: - Roller conveyor infeed - Hydraulic clamping vice - Coolant system (switchable) - Control panel with emergency stop - Feed length adjustment with handwheel and counter Remarks: Industrial metal band saw in used condition. Equipped with automatic feed and adjustable parameters. Visible signs of wear and use. Functionality not tested. Own mass: approx. 1,800 kg Dimensions (LxWxH): approx. 1,800 x 1,200 x 1,700 mm Auction-ID: A7-4599 ...

BOMAR Individual 520.360 DANC Bandsaw Machine Fully automatic double bevel sawing machine with double miter, machines in one Compact design with long stroke. Fully automatic Band saws from the Individual series are known for their impressive saw performance and easy operation. • Fully hydraulically controlled (saw feed, lifting, clamping) • Horizontal downward saw frame by means of linear guides • Integrated connector with removable rollers Automatic saw frame height adjustment Driven chip brush Digital angle reading Equipped with automatic cutting pressure control, depending on the material • Infinitely adjustable cutting speed 20-120 mtr./min. • Adjustable carbide saw guides • Control panel easily movable • Heavy duty drive motors • Feed systems with feed stroke 2300mm. (can be extended up to 6000mm) Cutting speed Supply stroke Drive motor Saw blade size Material height ...

Serial number: 20243112Power: 1.5 kWCutting capacity round 90°: 225 mmCutting capacity square 90°: 200 x 200 mmCutting capacity flat 90°: 245 x 150 mmCutting capacity round 45°: 160 mmCutting capacity square 45°: 160 x 160 mmCutting capacity round 60°: 100 mmCutting capacity square 60°: 100 x 100 mmWorking height: 910 mmSaw blade dimensions: 2480 x 27 x 0.9 mmCutting speeds infinite: 20 - 90 m/minfor further technical data see photographed data sheetwith feed and discharge roller conveyorLength of the feed roller conveyor: approx. 3800 mmLength of the discharge roller conveyor: approx. 3000 mmTransport dimensions: 1400 x 1700 x 2080 mmReference: Schiller - Lot 1 Auction-ID: A7-46763-177

Machine number 6418106052material discharge length approx. 1600 mmwith feed length approx. 2200 mmmax. material span approx. 250 mm (measured)max. material clamping height approx. 200 mm (measured)with discharge roller conveyors, 2 pieceseach approx. 1000 mm lengthmax. load t/mtotal material removal length approx. 4000 mmwith spare saw blades, approx. 8 pcs.Reference: Prologtec Lot 3 Auction-ID: A7-46763-126

Auction-ID: A3-43528-12196

Machine number: 693601Blade length: max. 3320 mmBlade length: min. 3120 mmTable dimensions: 500 x 500 mmincl. saw blade welder and grindstone Auction-ID: A7-46287-85

Machine number: 232597Operating voltage: 400 VNominal current: 32 ABelt length: 5080 mmControl: SIEMENS SIMATIC HMIMaterial support height: 1200 mmRoller diameter: 630 mmProjection: 370 mmMaximum cutting height: 320 mmGuide rod (hydraulic stroke): 200 mmBelt tension (hydraulic stroke): 60 mmSawing parameters - Belt speed: 250 - 2000 m/minincl. roller conveyorwidth: 350 mmReference: Heraeus Auction-ID: A7-46763-336

Incl. accessories, without pallet truck Auction-ID: A1-46781-42

Cutting capacity: 340 mm (round) / 340 x 340 mm (square)Power: 8 kWPower supply: 400 V / 50 HzHydraulic clampingIntegrated coolant systemChip conveyor present Auction-ID: A1-46647-205

Drive saw blade: 2.2 kWHydraulic unit: 0.37 kWCoolant pump: 0.12 kWTotal power requirement: min. 2.7 kWCutting speed: up to 75 m/minSaw feed: hydraulicLowering speed: 0-250 mm/minSaw blade dimensions: 4100 x 27 x 0.9 mmMax. material weight: 250 kgCutting length: approx. 400 mmReference: Weilheim 2. gr. A - Lot 17 Auction-ID: A7-46763-344

Machine number:6541; Operating voltage: 400V, 50Hz; equipped with Siemens control, max. saw diameter 430mm incl. feed rollers and spare saw blades Auction-ID: A7-46619-266

Serial No: 14076 .1 15 A Cutting Diameter: 120 mmx Saw blade diameter: 370 mm Vise: 190 mm Blade thickness: 3mm Motor power: 4kw incl straps with stop Auction-ID: A7-46619-360

Not tested; Auction-ID: A7-46458-77

Double Miter Band Saw -Mitre cuts up to 60° left and 45° right -Vice with quick-release device -Belt tension control -Electr. Automatic cooling Cutting diameter 235 mm Saw blade dimensions 2645 x 27 x 0.9 mm Cutting width 280 x 190 mm Cutting speed 45/90 m/min Cutting capacity at 60° round 120 mm Cutting capacity at 60° square 120 mm Cutting capacity at 45° Round 190 mm Cutting capacity at 45° square 170 mm Connection voltage 400 volts Total power requirement 1.1 kW Machine weight approx. 290 kg Dimensions L x W x H 1.2 x 0.8 x 1.2 m Auction-ID: A7-46460-586

Double mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable - Quick-release vise - Massive, large material support - Automatic cooling Cutting range at 90 degrees: around 255 mm Cutting range at 90 degrees: square 240 mm Cutting area at 90 degrees: rectangle 300 x 180 Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Belt speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Dimensions approx. 1.23 x 1.7 x 1.75 m Condition: New Auction-ID: A7-46460-421

Mitre Band Saw Semi-Automatic - Mitre +/- 60 degrees - Coolant device - Emergency stop Cutting diameter 260 mm Saw blade 3800 x 27(25) x 0.9 mm Cutting width 400 x 260 mm Cutting speed 20 - 90 m/min Total power requirement 1.85 kW Machine weight approx. 0.62 t Dimensions approx. 1.8 x 1.6 x 1.5 m Auction-ID: A7-46460-429

Powerful and particularly robust metal band saw with mAlu die-cast saw table and infinitely variable cutting speed for mitre cuts up to 60° Without machine base ! Cutting range at 90 degrees: around 172 mm Cutting range at 90 degrees: square 170 mm Cutting area at 90 degrees: rectangle 170 x 170 Saw blade dimensions 2035 x 20 x 0.9 mm Dimensions L x W x H 430 x 960 x 520 m Belt speed 30 - 80 m/min Total power requirement 1.5 kW Machine weight approx. 38 kg Condition: never used / new (5) Auction-ID: A7-46460-486

Miter band saw Cutting diameter 170 mm Saw blade dimensions 2080 x 20 x 0.9 mm Table height 880 mm Cutting speed 40 + 80 m/min Cutting capacity at 90° Round 170 mm Cutting capacity at 45° Round 125 mm Cutting area at 90 degrees: rectangle 150 x 190 mm Cutting area at 45 degrees: rectangle 95 x 120 mm Total power requirement 1.1 kW Machine weight approx. 0.24 t Dimensions LxWxH 870 x 1,550 x 1700 mm Condition: never used / new (5) Auction-ID: A7-46460-447

Mounting band saw: Cutting range at 90 degrees: around 125 mm Cutting range at 90 degrees: square 125 mm Cutting area at 90 degrees: rectangle 127 x 125 mm Saw blade dimensions 1435 x 12.7 x 0.6 mm Belt speed 38 - 80 m/min Total power requirement 0.95 kW Machine weight approx. 18 kg Dimensions L x W x H 720 x 380 x 450 m Condition: never used / new (5) Auction-ID: A7-46460-617

Double mitre band saw Cutting range at 90 degrees: around 250 mm Cutting range at 90 degrees: square 240 mm Saw blade length: 2965 x 27 x 0.9 mm Belt speed 37 / 76 m/min Total power requirement 1.0 kW Condition: unchecked (6) Auction-ID: A7-46460-445

Portable and removable metal band saw HBM 1100 Watt This mobile band saw can also be used without a stand. Special features The powerful mobile band saw machine with 1100 watt motor can also be used separately for materials up to 127 x 127 mm. Includes 2 saw blades, work table and integrated LED lighting. Saw blade length 1140 mm with adjustable variable handle. Lightweight and handy. Ideal for universal construction work, for assembly, in the workshop or for private use. Saw size 1140 x 13 x 0.65 mm. Maximum cutting capacity 127 x 127 mm Cutting speed 144 m/min. Voltage 230 volts. Motor power 1100 watts. Package sizes 50 x 30 x 39 cm. Weight 15 kg. Condition: never used / new (5) Auction-ID: A7-46460-589

Miter Band Saw -Mitre cuts up to 60° left -Vice with quick-release device -Belt tension control -Electr. Automatic cooling Cutting diameter 225 mm Saw blade length 2455 mm Table height 850 mm Cutting width 245 x 150 mm Cutting speed 45/90 m/min Saw blade dimensions 2480 x 27 x 0.9 mm Cutting capacity at 60° around 90 mm Cutting capacity at 60° square 90 mm Cutting capacity at 45° Round 145 mm Cutting capacity at 45° square 145 mm Connection voltage 400 volts Total power requirement 1.5 kW Machine weight approx. 0.2 t Dimensions L x W x H 1.43 x 0.72 x 1.7 m Condition: never used / new (5) Auction-ID: A7-46460-462

Mounting band saw Powerful and particularly robust metal band saw with aluminium die-cast saw table and infinitely variable cutting speed for Mitre cuts up to 60° Cutting range at 90 degrees: around 130 mm Cutting range at 90 degrees: square 130 mm Cutting area at 90 degrees: rectangle 130 x 125 Saw blade dimensions 1440 x 13 x 0.65 mm Dimensions L x W x H 350 x 690 x 520 m Belt speed 30 - 80 m/min Total power requirement 1.2 kW Machine weight approx. 19 kg Condition: never used / new (5) Auction-ID: A7-46460-519

Horizontal band saw, semi-automatic Cutting diameter 260 mm Cutting range at 90 degrees: around 260 mm Cutting area at 90 degrees: square 250 x 400 mm Cutting speed 20 - 80 m/min Conventional control Total power requirement 2.0 kW Machine weight approx. kg Dimensions LxWxH 2.0 x 1.4 x 1.2 m Auction-ID: A7-46460-431

Miter Band Saw - Semi-automatic - Double mitre - Material detection during lowering - Incl. 7 saw blades Cutting diameter 260 mm Saw blade length 3340 x 27 x 0.9 mm Cutting range at 90 degrees: square 260 mm Cutting range at 90 degrees: flat 380 x 260 mm Belt speed 37 / 74 m/min Saw motor 1.5 kW Machine weight approx. 0.62 t Dimensions approx. 1.7 x 1.4 x 1.3 m Auction-ID: A7-46460-405

Description: -Mitre cuts up to 60° left -Cutting speed 35 / 70 m / min. -Vice with quick-release device -Saw blade guide made of carbide -Belt tension control -Electr. Automatic cooling Auto-Cut System = 3 Stages System -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch -High-speed lowering of the saw frame from the resting position to the workpiece, then switch to normal saw feed -Manual operation Cutting diameter 220 mm Saw blade length 2455 mm Table height 850 mm Cutting width 230 mm Cutting speed 35 + 70 m/min Saw blade dimensions 2455 x 27 x 0.9 mm Cutting capacity at 60° around 90 mm Cutting capacity at 60° square 90 mm Cutting capacity at 60° flat 90 x 100 mm Cutting capacity at 45° Around 150 Cutting capacity at 45° square 150 Cutting capacity at 45° rectangle 150 x 210 Cutting capacity at 90° Round 220 mm Cutting capac ...

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-45834-216

A deposit of €180.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Cutting stroke 500 mm Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-15

Type: Automatic Bandsaw Brand: KASTO Model: SSB 260 VA Year of manufacture: 1989 Application: Automatic metal cutting (bars, profiles, solid materials) Equipment: - Hydraulic clamping system - Automatic feed system - Roller conveyor infeed - Integrated control panel with digital display (Minipos 807) - Coolant system (integrated base tank) Technical Data: Voltage: 380 V Frequency: 50 Hz Power: approx. 6.0 kW Condition: Used Auction-ID: A7-45993-76

Make: Danobat Type: Horizontal Band Saw (2-column) Model: CR 260 A Year: 1996 Manufacturer: Danobat S. Coop. Ltd. Technical data: - Cutting type: Automatic horizontal band saw - Saw design: 2-column construction - Cutting capacity: approx. Ø260 mm (typical for model class) - Drive power: 3 kW (according to plate) Equipment: - Hydraulic clamping vise - Automatic feed system - Control panel with display & keypad - Coolant system - Chip tray / collection area - Safety covers and guards Application: - Cutting of steel bars, profiles and solid materials - Workshop and production use Condition: Used Remarks: Signs of wear, paint damage and contamination; functionality not tested Own mass: approx. 1,200 kg Dimensions (LxWxH): approx. 2,450 x 2,000 x 1,800 mm Auction-ID: A7-45993-43

Machine number: 01882Cutting length: 300 mmincl. roller conveyorRoller conveyor width: 380 mmRoller conveyor length: 4000 mm Auction-ID: A7-46287-143

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-45834-121

размеры пильной ленты: 5.000 x 34 x 1,1 ммрабочая зона: 310 / 520 x 310 ммдлина реза: мин.: 8 ммскорость резки: 14 - 125 м/минОбщая потребляемая мощность: 5 кВтВес станка ок.: 1,5 тгабаритов станка ок.: мДанные для этого объявления были созданы с помощью ModulMWS - программного решения компании LogoTech oHG.

: 325 mm: 4380 mm: 400 mm: 325 mm: 400x325 mmdimensions of saw-band: 4380x34x1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.