Продавайте профильные ножницы MUBEA с отверцоколом, Профильные сжицы для угла, квадрата, круглого и Плоская сталь с вырезами device.By руки и Стопный спусковой крючок. Машина в очень хорошем состоянии Состояние. Сила режения 350 кН. Резкая сила для Листовой металл 150x13 мм, отверстие 28 мм в 10 кусочках Листовой металл, угловая сталь до 90x8, круглая сталь до 30 мм, квадратная сталь до 24 мм (сталь до 400N /мм). Для этой цели различные Отверстие и щельное отверстие.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 1063 €: 1 1/4 42,4, 1 1/2 48,3 mm: 3 mm: 2.5 mm: 15 kgThe AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Машина практически не используется Давление: 60,0 т Квадратная сталь: 35,0 мм Технические характеристики Давление: 60,0 т Квадратная сталь: 35,0 мм Стальной уголок: 120x120x12 мм Круглая сталь: 40,0 мм Сечение пробивки в кв. мм: Ø28 in 15 / Ø38 in 11 mm Выступ: 220 мм Плоский сталь: 200x20 / 300x15 мм Y0798Jol Длина ножа: 317 мм Емкость масла: 45,0 л. Рабочая высота: 940 / 1140 mm Скорость хода в минуту: макс. 26 Рабочий ход: 55,0 мм Общая потребляемая мощность: 4,0 кВт Вес машины ок.: 1425 кг. Размеры ВхШхГ: 1510 х 590 х 1570 ...
: gebraucht : 2012 : 9403 : prompt, Zwischenverkauf v : China : 180 €: 1 : 1/4, 3/8, 1/2 mm: 4 kgoperation by hand lever and eccentric3 tube diameter combined in oneassembling and welding of tubesin 90 degrees angleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 979 €: 1 1/2 48,3 mm, 2 60,3 m mm: 3 mm: 2.5 mm: 15 kgThe AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2",) and 60.3 mm (2",).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 811 €: 3/4 26,9 mm, 1 33,7 mm, mm: 3 mm: 2.5 mm: 8 kgThe AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",).The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past.The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 879 €: 20 - 76,1 mm: 3 mm: 2.5 mm: 7 kgThe ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm.Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment.ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5104 €: 98.51 €: 3/4 26,9 mm, 1 33,7 mm, mm: 5 mm: 3 mm: 87 kgThe motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",).Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution!The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5932 €: 114.49 €: 3/4 26,9 mm, 1 33,7 mm, mm: 5 mm: 3 mm: 93 kgThe motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",)and notch pipes with an external diameterof 22 mm to 76 mm for sink outflows.Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution!The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.The data for this ad was created ...
