Производитель: Арбург Тип: 320S 500 - 350 Год постройки: 1998 Контроллер: Selogica Закрытие силы зажим/сила: 500 кН Тип закрытия/тип: Гидравлический Интервал между галстуками/dist.Betw.Tiebars: 320 мм x 320 мм Размер плиты: 446 мм x 446 мм Встроенная высота/плесень высокая: мин 225 мм Путь открытия/открывание хода: 350 мм Плита интервал макс /Макс. Открытый дневной свет: 575 мм Размер винта/винта: 40 мм Объем хода/ ...

Operational hours counter: 85,318h, with documentation, without accessories. ...

• больше информации

Screw diameter: 30mm, connected load: 42kW, operational hours counter pump/ automatic: 73,384/ 64,491h, with control software version 3.080, an on-site inspection is possible. ...

• больше информации

Connected load: 62kW, operational hours counter: 77,112h, with Robot MultiLift, an inspection is possible. ...

• больше информации

Метод замыкания Усилие смыкания [кН] 500 Размеры монтажных пластин (hxv) [мм] 472 x 472 Зазор между колоннами (hxv) [мм] 320 x 320 Мин./ макс. Высота формы [мм] min 225 Максимальная ширина открывания [мм] 575 Узел впрыска Диаметр винта [мм] 30 Объем впрыска [см3] 78 Вес впрыска [г] 71 Давление впрыска [бар] 2210 Электрогидравлическое оборудование Номинальная мощность двигателя насоса [кВт] 15 Мощность нагр� ...

Arburg 320S 500-150 Closing unit Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 472 x 472 Clearance between columns (hxv) [mm] 320 x 320 Min./max. mold height [mm] min 225 Maximum opening width [mm] 575 Injection unit Screw diameter [mm] 30 Injection volume [cm3] 78 Injection weight [g] 71 Injection pressure [bar] 2210 Electrical and hydraulic equipment Rated power of the pump motor [kW] 15 Heater power [kW] 8.4 Dimensions and weight Net weight with control cabinet [t] 2.25

Closing unit Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 472 x 472 Clearance between columns (hxv) [mm] 320 x 320 Min./max. mold height [mm] min 225 Maximum opening width [mm] 575 Injection unit Screw diameter [mm] 30 Injection volume [cm3] 78 Injection weight [g] 71 Injection pressure [bar] 2210 Electrical and hydraulic equipment Rated power of the pump motor [kW] 15 Heater power [kW] 8.4 Dimensions and weight Net weight with control cabinet [t] 2.25 t

clamping force: 350 kN injection volume: 59 cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: injection moulding machine for rubber - used International size: 350-90 clamping unit: - clamping force: 350 kN - clamping platen size: 400 x 400 mm - Clear distance between tie bars: 270 x 270 mm - Mould installation height min.: 225 mm - Distance between clamping platens: max. 550 mm - Opening stroke max.: 325 mm - Ejector stroke: 125 mm Injection unit: - Screw diameter: 25 mm x 20D - Injection volume max.: 49 cm³ - Injection part weight: 59 g/hp - Max. injection pressure:  ...

Description: Closing unit: , closing force 350 kN, ,random force 32.5 kN, opening force 25 kN Opening stroke max. 350 mm Tool installation height 175 mm Distance between the clamping plates max. 525 mm Ejector force 30 kN, ejector travel ,125 mm Injection unit: screw diameter 30 mm, effective screw length 20 l/d, screw stroke 110 mm Stroke volume 78 cm³ Injection part weight 65 g Injection pressure 2200 bar Approx. Onsite Dimension. (l x w x h): 3,200 x 1,200 x 1,900 mm, weight approx.: 3,200 kg

Description: Serial number 161491 Clamping force: 350 kN Mould opening force, max.: 31/100 kN Size of mould platens 400 mm x 400 mm Distance between tie bars 270 mm x 270 mm Mould opening stroke: 325 mm Mould height min.: 225 mm Max daylight: 550 mm Hydraulic ejector - stroke: 125 mm Ejector force forward/backward: 31 kN Screw diameter: 30 mm Ls/D ratio: 20 Injection pressure: 2400 bar Stroke volume: 67 ccm Shot weight, PS: 56 g Injection stroke: 95 mm Screw speed: 10 - 550 1/min Nozzle pressure: 60 kN Nominal capacity of pump motor: 11 kW Installed heating capacity: 3,4 kW Reservoir capacity: 190 ltr. Operating voltage 420 V, 50 Hz Dimension 3300 cX1200 x 1500 mm Weigh ...