Feeder lathe Traub Tnl 32G + FMB turbo 5-42 The machine is from 1996. The machine tool has two eight-tool turrets, including one fixed and one torsion (B axis). Both heads have all driven sockets. The lathe is equipped with a spindle with a support sleeve, a counter spindle and a part gripper. A belt chip conveyor is built into it. The feeder feeds bars in the diameter range from 5mm to 42mm with a maximum length of 3m Main parameters: Spindle: 32mm bore Speed ​​max.6000 rpm Power=11kW Revolver 1: X = 60mm Z = 320mm Power = 1.5kW Revolver 2: X = 180mm Z = 1200mm B=0-90 degrees Power = 1.5kW counter spindle: Z = 800mm Speed ​​max.6000 rpm Pow ...

Traub TNL 12 - 7, Construído em 2002, Controle TX 8i, fuso principal do eixo C, Revólver 1 com acoplamento Ferramentas Revólver 2 com atacado Ferramentas Torreta giratória multi-arestas 2, Aparelhagem dianteira com acionamento de ferramentas, Eixo C contra fuso, Estação de perfuração traseira com acoplado ferramentas e eixo X4, Carregando revista, Transportador Sistema de filtro de correia, instalações de gases refrigerantes,

Traub TNL 12 - 7, Construído em 2002, Controle TX 8i, fuso principal do eixo C, Revólver 1 com acoplamento Ferramentas Revólver 2 com atacado Ferramentas Torreta giratória multi-arestas 2, Aparelhagem dianteira com acionamento de ferramentas, Eixo C contra fuso, Estação de perfuração traseira com acoplado ferramentas e eixo X4, Carregando revista, Transportador Sistema de filtro de correia, instalações de gases refrigerantes,

Traub TNL 12 - 7, Construído em 2006, Controle TX 8i, fuso principal do eixo C, Revólver 1 com acoplamento Ferramentas Revólver 2 com atacado Ferramentas Torreta giratória multi-arestas 2, Aparelhagem dianteira com acionamento de ferramentas, Eixo C contra fuso, Estação de perfuração traseira com acoplado ferramentas e eixo X4, Carregando revista, Transportador Sistema de filtro de correia, instalações de gases refrigerantes,

 ...

• mais informação

turning diameter over bed: 20 mm spindle passage: 24 mm turning length: 180 mm turning diameter: 20 mm control: Traub System TX 8i-s turning speeds: 10000 U/min c-axis: 0,001° c-axis: 0,001 ° gripping station: 20 mm speeds: 12000 U/min rapid traverse: 15 m/min turret (x-stations): 2 x 8 high-pressure pump: 130 bar total power requirement: 2,2/3,7 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 2,5 x 1,5 x 2,25 m driven tools: 6+4+4 Rev+S7+S8 fire distinguisher: parts conveyor: CNC long lathe Traub TNL 18, year of construction 2011 and 2012, without loading magazine can be used as long lathe and short lathe 2 pieces immediately available, from medical technology super con ...

 ...

• mais informação

This Traub TNS 26 DGY Lathe was manufactured in the year 1991. It is equipped with a Traub TX8F control unit. The machine has a spindle speed of 7000 rpm. ...

• mais informação

This TRAUB TNC 42/65 Lathe was made in 2007. There are 2 units available. ...

• mais informação

This TRAUB TNE300 Lathe was manufactured in 1999 in Germany. It has a turning length of 450 mm and a turning Ø of 275 mm. The turning speed is 4,000 rpm. This turning machine is operated with a TRAUB System TX 8H control. It has 2 axes (X-axis 210 mm, Z-axis 450 mm). Contact us anytime for further questions!