subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 201)
Machine: Sliding table saw SCM NOVA SI 400EP Year: 2018 Sliding trolley: 3200 mm 90° cutting height: 140 mm (blade Ø400 mm) 45° cutting height: 97 mm (blade Ø400 mm) Blade inclination: 0-45° Main Blade Speeds: 3000 / 4000 / 5000 RPM Ø scoring blade: 120 mm – 8500 rpm Parallel fence cutting width: 1270 mm Guidance: Manual parallel with micrometer adjustment, metric reading Table: outlet extension + squaring frame Safety: front and side emergency stop, suspended protection with suction Ø80 mm, magnetothermal circuit breaker, automatic engine brake Suction: Ø120 + Ø80 + Ø60 mm, flow rate 1200 m³/h Auction-ID: A1-50215-10
-Cutting dimension: 4300mmx4300mm MAX -Blade protrusion: 70 mm -10hp engine -Weight: 3000KG -Year: 2012 Auction-ID: A1-50215-16
Machine: CNC Panel Saw Cutting dimensions: 5300 x 2240 x 80 mm Control: 12'' touch screen, laser guidance, DMS-X, EPS-Y Cycle: Auto Sawing, Selectable Sequence, Pneumatic Clutch Database: built-in tools, hour counter, manual mode Blade: Ø300 mm, bore Ø30 mm Cutting height: 80 mm Blade speed: 4800 rpm Blade motor: 5.5 kW (7.5 hp) Suction: Ø140 mm, TRK high power system Air pressure: 6-10 bar Noise level: 83 dB Installed power: 7.5 kW (10.4 kW option 4SB) Weight: approx. 1200 kg Power supply: 3x400V / 50 Hz Auction-ID: A1-50215-25
Machine: HOMAG Flat Saw CHF 325 38/35 Year: 2004 Max. cross-section: 3800x3800 mm Max. height: 60 mm Blade projection: 72 mm Ø main plank: 350x75 mm Ø scorer: 200x45 mm Engine power: 9.2 kW (12 hp) Scoring power: 1.1 kW (2.2 hp) Speeds: Carriage feed 0-60 m/min, return 60 m/min, programmed pusher 25 m/min Tables: 3 air cushion tables 1900x600 mm Gross Weight: 4200 kg Power supply: 380 V Compliance: CE Auction-ID: A1-50215-5
Machine: Sliding table saw Carriage: 3200 x 360 mm Main plank: Ø250 / 300 / 350 / 400 mm Blade shaft: Ø30 mm Cutting height: 125 mm (blade Ø400 mm) Blade inclination: 90° - 45.5° Blade Motor: 4 kW (5.5 hp) Auction-ID: A1-50215-28
Machine: Panel Saw Panel dimensions: 3800 x 3800 mm Blade overhang: 55 mm Main plank: 72 mm protrusion Number of Clamps: 7 Max. feed: 80 m/min Main Motor: 7.5 kW Scorer: motorized adjustment Stop: right side Compliance: sensitive parts yes Auction-ID: A1-50215-9
Machine: Double Head Chainsaw Blades: 2x Ø500 mm widia, bore Ø32 mm (reducing) Tilt: 90° / 45° / 22.5° + intermediate positions Blade motors: 2x 2.2 kW (3 HP), 2800 rpm, three-phase 230/400V-50Hz Blade feed: pneumatic with hydraulic adjustment Cutting capacity: min. 305 mm / max. 4-6 m depending on version Heads: 1 fixed + 1 mobile (electronic positioning) Clamping: 2 vertical vices + 3 pneumatic horizontal vices Equipment: 2.5 m roller conveyor, nebulization lubrication, protective boxes, waste collection bin Control: PLC, Membrane Protected Keypad Operating pressure: 7 bar Auction-ID: A1-50215-31
Technical characteristics: - Table dimensions: 1000X560 mm - Trolley dimensions: 3200x350 mm - Squaring carriage stroke with scoring machine: 3350 mm - Cutting width on rip fence: 1300 mm - Blade inclination: 0-45° - Max cutting height with diam. Blade: 350 mm - 118 mm - Max cutting height at 45° blade front: 350 mm - 81 mm - Max blade diameter / saw hole: 350/30 mm - Saw rotation speeds: 3000/4600 rpm - Suction nozzle diameter in the frame: 100 mm - Saw Motor Power: 4kW (5.5HP) 50Hz - Incisor motor power: 0.55kW (0.75hp) - Noise level according to en 27960 standards: 81.2-83.9 dB(A) - Maximum angle opening with stops: 3600 mm Standard equipment: - Sliding anodized aluminum alloy trolley on precision adjustable barn guides made of hardened and ground steel - Fixed protection on saw blade - Additional table with 90° quick-release angle guide and step-by-step tilt graduation at 10° ...
NEW CONDITION ⦁ Double roller trolley, length 3200 mm ⦁ Incisor ⦁ Parallel fence 1300 mm ⦁ Large MSX protective cover. 400mm ⦁ Main motor 5.5 KW (7.5 HP) ⦁ 3 speeds 3/ 4/ 5,000 rpm ⦁ One-sided miter guide Two wooden crates: 187 x 131 x 105 cm, 904 kg gross weight 331 x 45 x 31 cm, 244 kg gross weight Auction-ID: A1-50215-6
Machine: Sliding table saw Carriage: 3200 mm 90° cutting height: 140 mm (blade Ø400 mm) 45° cutting height: 97 mm (blade Ø400 mm) Blade inclination: 0 - 45° (manual) Main Blade Speeds: 3000 / 4000 / 5000 RPM Scorer: Ø120 mm, 8500 rpm, independent motor Parallel fence cutting width: 1270 mm Guide: manual parallel Ø40 mm with micrometric adjustment Table: outlet extension + squaring frame Safety: emergency stops, suspended protection with suction Ø80 mm, magnetothermal circuit breaker, automatic engine brake Suction: Ø120 + Ø80 + Ø60 mm, flow rate 1200 m³/h Auction-ID: A1-50215-7
cutting diameter: 300 mmcapacity 90 degrees: flat: 330 x 250 mmcapacity 90 degrees: square: 250 x 250 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 260 x 200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 170 mmband speed: 15 - 100 m/mindimensions of saw-band: 3650 x 27 x 0.9 mmControl: MEP CNC total power requirement: 2.2 kWweight: 1190 kgFully automatic electro-hydraulic band saw, featuring additional operating modes: semi-automatic semi-automatic dynamic manualDescription:- Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) MEP Direct control technology User interface with intuitive 10 touchscreen display Mechanical buttons for saw operating functions Guarantees reliable, simple, and intuitive operation Real-time monitoring of all cutting parameters Pivoting arm allows for convenient and safe operation Display and logging of al ...
- Maximum saw blade diameter 500 mm. - Sliding table length approx. 3,400 mm. - Motor power 7.5 kW. - Cutting width 1,300 mm. - Angle stop, crosscut length up to 3,200 mm. - Miter stop, crosscut length up to 2,500 mm. - with flexible suction hose, without galvanized extraction ducts. Auction-ID: A1-49374-13
- Max. cutting width: 625mm. - Max. cutting height: 135mm. - 45°. - Max. saw blade 450mm. Auction-ID: A1-49374-14
- Max cutting length: 3400mm. - Max cutting length: 3200mm. - Max cutting width: 1550mm. - Control panel not working. - with flexible suction hose, without galvanized extraction ducts. Auction-ID: A1-49374-12
- Max saw blade: 500mm. - Soft start. - Infeed roller conveyor length approximately 490cm, roller width 40cm. - Discharge-roller conveyor length approximately 261cm, roller width 40cm. - with flexible suction hose, without galvanized extraction ducts. Auction-ID: A1-49374-16
Serial number: 423.01.325.08Table dimensions: approx. 1700 x 900 mmwith digital stop: 0 - 800 mmFront analogue stop: 0 - 1000 mmReference: Wup - Lot 10 Auction-ID: A7-49882-295
Serial number: 790300345Table dimensions: approx. 620 x 520 mmSaw blade dimensions: 200 x 2 x 32 mmSwivel tableReference: Wup - Lot 4 Auction-ID: A7-49882-293
Serial number: 7903003416Table dimensions: approx. 620 x 520 mmSaw blade dimensions: 200 x 2 x 32 mmSwivel tableReference: Wup - Lot 5 Auction-ID: A7-49882-294
Technical data Manufacturer: Striebig AG Type: Standard II Plus 6220 A Serial Number: 22823 Year of Make: 1992 Saw blade diameter: 300 mm Saw blade speed: 4750 rpm Motor power: 4.5 kW Engine speed: 2880 rpm Max. cutting width: 5300 mm Max. cutting height: 2100 mm Max. panel height: 2200 mm Max. machining thickness: 80 mm Dimensions: approx. 6500 × 1300 × 2880 mm Weight: approx. 900 kg Configuration Equipment: Vertical panel saw with small parts support and integrated extraction. Remarks Condition: Used, according to the present description good condition. Operating hours unknown. The EN 50699 measurement was not passed. Auction-ID: A1-50026-1
With saw blade 200 mm, thickness 2 mm The saw unit has been a rebate saw for the back of a circular saw, adjustable in height and depth. Auction-ID: A1-48994-51
Technical data Manufacturer: E. Kiessling & Co., Leipzig-Plagwitz Design: Band saw in heavy cast construction Drive: Electric motor with belt drive Work table: Metallic work table Configuration Vertical band saw with large band saw wheels, height-adjustable saw blade guide and protective covers. The machine is set up on a wooden pallet. Auction-ID: A1-50026-38
Zahringer on column equipped with a material vacuum table With three 250 mm saw wheels Bottom Blade Extraction Maximum cutting height 200 mm With double-handle start protection Passage at frame and saw tape 390 mm The band saw is mounted on a heavily mounted swivel arm of 1200 mm With a range of D = 2400 mm The machine is suitable for cutting profiled purlin heads (Pfettenkopfe). 4x saw blade included 220 volt sockets in the column. Vacuum suction device Rietschle Motor 380 volt, 0.75 Kw with a suction power of 25 m3 With automatic on and off and thermal motor protection. Vacuum tank 400 x 610 x 200 mm. Auction-ID: A1-48994-32
Technical data Manufacturer: Altendorf Type: F 45 Machine No.: 90-3-121 Year of Make: 1990 Max. saw blade diameter: 350 mm Voltage: 380 V Main saw motor: 5.5 kW Scoring unit: available Saw blade speeds: 3,000 / 4,000 / 5,000 / 6,000 min⁻¹ (Source: Online research) Configuration Sliding table length: approx. 3,200 mm (source: online research) Cutting width: approx. 1,250 mm (Source: Online research) Max. cutting height: approx. 105 mm (Source: online research) Saw blade: swivels up to 45° (Source: online research) Suction: Extraction connection and extraction hood available. Note Some of the technical information has been supplemented on the basis of verified online sources and marked accordingly in each case. The information has been researched to the best of our knowledge and belief. No guarantee is assumed for completeness and accuracy. A viewing before purchase is expressly rec ...
2800 rpm, Saw blade 350 mm, Pull-out arm 620 mm, With lock for unintentional forward of the ball-bearing saw unit, wooden saw table of W= 4700 mm and D= 830 and H= 1000 mm including guide. With metal extraction tray behind the saw. Auction-ID: A1-48994-33
Digital adjustment and readout of the longitudinal conductor and digital adjustment and readout of the crosscut conductor slide. Aluminum saw carriage length 3400 mm. Maximum digital cutting width 1300 mm. Maximum digital cut-off size 2800 mm. With saw carriage lock for easy placement of larger plates and workpieces on the carriage. Digital readout of the height of the saw blade, and digital adjustment of the angle of the saw blade. Tipp-on variable servo drive control of the long saw carriage that can be controlled with a controllable joy-stick, it can also be used to regulate the speed of the saw carriage. With two vertical snaps for the saw trolley to press wood or plates. A plastic cover strip is not present on the digital crosscut guide. Equipped with an aluminum blade extension to the right of the saw of 93 cm and a length to the back of 135 cm. Blade extension behind th ...
5.5 Kw, wheels 1000 mm diameter, Automatic star/triangle switch. Double extraction nozzle under the blade. Double PANHANS saw guide for above and below the saw table. Use of linden saws from 8 mm to 50 mm wide. With adjustable longitudinal guide and an adjustable depth guide. Maximum cutting height 336 mm. With thermal motor protection. Extra saws included Auction-ID: A1-48994-17
Saw blade 350 mm Guide stop 60 mm high Maximum cutting size 90 x 170 mm Fixed corner locks left and right 10-15-22.5-30-45 degrees All degrees can be adjusted separately from 46-90-46 degrees. With base and aluminum stop with two lugs adjustable up to 3500 mm. Base is made of wood and is 4700 mm wide x 750 mm deep and 970 high. With spare protective cover and a sawdust trap. Auction-ID: A1-48994-30
Number of motors: 1 Stück0: , mmControl: , 0cutting width: 115 und 82 mmCutting height: 55 mmMotor output: 2.0 kWmachine weight ab.: 45 kgGraule KS crosscut saw for cutting (glass) beads with a rebated jointwith manual and electronic length stop Suitable for wood, PVC, aluminum-----------------------------------------------Brief manufacturers description:- Crosscut and miter saw for precise and user-friendly cutting to lengthin the strip area- Sturdy gray cast iron construction- A double ball-bearing axle acts as a pivot point belowthe material support table, facilitating material cutting. The cutis always made at the rear top.- Quick miter adjustment up to 45°- Readjustable fixed stops at 90° and 45°- Upper saw blade guard can be connected to extraction system-----------------------------------------------Technical data:Motor: 400 V / 2.0 kWSpeed: 2,800 rpmMax. cutting width: 115 mm ...
Sawblade tiltable: 0-46 °Length of the rolling table: 3200 mmcutting width: 1000 mmMotor output: 5,5 kWCutting height: 179 mmCutting height at 45°: 123 mmSaw blade diameter: 500 mmSpeed: 3/4/5000 U/min.weight of the machine ca.: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3.300 € 
