There are two identical machines available, weight: 92kg. ...

• mais informação

 ...

• mais informação

Krauss KM 1000-5700 M Injection Moulding Machine The machine is not in used after the maintenance was done 3-4 years ago.Plastic parts (some gaskets and O-rings) will need to be overhauled due to waiting time. Last service history: It was stated that there was a problem with the injection ratio. It has been reported that there is no electricity to the proportional valve. The electronic card has been sent to the service. In the service check, we were told that the card was working without any problems. To sum up, it needs some maintenance

Description: working hours: approx. 41041 hrs. 3axis robot serial number: 2112257 IMM type: Thermoset IMM serial number: 51019359 clamping force: 160 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 115 cm3 max. spec. injection pressure: 1488 max. stroke opening: 950 mm max. mould thickness: 950 mm min. mould thickness: 300 mm tie bars distance horizontal: 520 mm tie bars distance vertical: 520 mm locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 75 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the video of this machine Approx. Onsit ...

Description: Travel paths , X 900 mm, Y 1800 mm, Z ,2500 mm, C 0 to 90° pneumatic Including enclosure 1400 x 2400 x 2100 mm Conveyor belt 590 x 2540 mm, height-adjustable Approx. Onsite Dimension. (l x w x h): 4,500 x 1,500 x 3,000 mm, weight approx.: 550 kg ...

• mais informação

Description: closing force: ,1200 kN auger diameter: ,35 mm ejection stroke: ,160 mm batch volume: ,61,09 cm3 injection speed: ,288,6 cm3/s injection pressure: ,2429 bar Approx. Onsite Dimension. (l x w x h): 6,000 x 1,700 x 2,000 mm, weight approx.: 9,700 kg ...

• mais informação

Description: Serial number 504171 Clamping force 500 Ton Opening stroke mm: 1260 Distance between tie bars mm: 900 x 800 Installation height min/max mm: 90 Mould fixing platen size 1270 x 1200 Screw size mm: 80 Injection shot weight in Polysterol gr: 1304 Injection volume cm³: 1433 Injection pressure increased bar: 1829 Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Control voltage 24 VDC Largest MTR FLA 34 A Short circuit current rating 10 KA Dimension 7400 x 2330 x 2500 mm Weight 17000 kg Approx. Onsite Dimension. (l x w x h): 7,400 x 2,330 x 2,500 mm, weight approx.: 17,000 kg

Description: Serial number 174470 Clamping force: 2000 kN Screw diameter 45 mm Ls/D ratio: 22 Injection pressure: 2336 bar Stroke volume: 305 ccm Shot weight, PS 278 g Injection rate: 200 ccm/s Screw speed: 342 1/min Plasticising rate max.: 37 g/s Nozzle pressure: 110 kN Mould opening force, max.: 101 kN Travel force movable platen Opening: 50 kN Travel force movable platen Closing: 42 kN Size of mould platens 915 mm x 915 mm Distance between tie bars 560 mm x 560 mm Mould opening stroke: 700 mm Mould height min.: 350 mm Max daylight: 1050 mm Hydraulic ejector - stroke: 200 mm Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Approx. Onsite Dimension. ( ...

Description: Serial number 254335 Clamping force 300 T Screw diameter 50 mm Tie bar spacing (H) 630 mm Tie bar spacing (V) 630 mm Shot volume 432 cm³ Shot weight 393 g Pressure on material 2304 bar Platen length 995 mm Platen width 1050 mm Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Control voltage 24 VDC Largest MTR FLA 34 A Short circuit current rating 10 KA dimension 45970 x 2040 x 2360 mm Weight 12.500 kg Approx. Onsite Dimension. (l x w x h): 45,970 x 2,040 x 2,360 mm, weight approx.: 12,500 kg

Description: serial numbe 253455 Clamping force 2500 kN Screw diameter 60 mm Mould opening force, max.: 160 kN Travel force movable platen Opening: 67 kN Travel force movable platen Closing: 62 kN Size of mould platens 900 mm x 830 mm Distance between tie bars 630 mm x 560 mm Mould opening stroke: 820 mm Mould height min.: 330 mm Max daylight: 1150 mm Injection pressure: 1778 bar Stroke volume: 678 ccm Shot weight, PS 610 g Injection rate: 565 ccm/s Screw speed: 259 1/min Plasticising rate max.: 58 g/s Nozzle pressure: 110 kN Electric and Hydraulic Equipment Nominal capacity of pump motor: 45 kW Installed heating capacity: 22,7 kW Rated voltage 400 V, 50 Hz Rated curren ...