Krauss Maffei KM 200-1000 CX Year of production - 2021 Fully hydraulic locking system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 21.5 ″ control panel with a color touch screen. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 55 mm, with back-lock and open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit - Mold clamping force: 2000 kN - Mold opening force: 101 kN - Mounting plate dimensions (h x v): mm 915 x 915 - Clearance between columns (h x v): mm 560 x 560 - Mold opening stroke: mm 700 - Minimum ...

Description Working hours: 73.000h New pump. ...

• mais informação

Máquina de moldagem de injeção Krauss Maffei Tipo: KM 180-1000 C3, Controlo de Bateria: Modelo MC 4: 1999 Unidade de fecho Força de aperto t: 180 Caminho de abertura mm: 700 Tamanho de holm mm: 560 x 560 Altura de instalação min/max mm: 600 Tamanho da placa: 915 x 915 Unidade de pulverização Diâmetro do parafuso mm: 55 Spray peso gr: 476 Volume de pulverização cm3: 523 Barra de pressão spray: 1904 Dimensões e pesos Dimensões LxWxH m: 5,6 x 1,9 x 2,2 Kg de peso da máquina: 9.700 Outros nova bateria Euromap12 da Bomba 2013

Krauss KM 1000-5700 M Injection Moulding Machine The machine is not in used after the maintenance was done 3-4 years ago.Plastic parts (some gaskets and O-rings) will need to be overhauled due to waiting time. Last service history: It was stated that there was a problem with the injection ratio. It has been reported that there is no electricity to the proportional valve. The electronic card has been sent to the service. In the service check, we were told that the card was working without any problems. To sum up, it needs some maintenance

Krauss Maffei KM 300-1000 CX injection molding machine Year of production - 2010 Fully hydraulic closing system. MC 5 control system with color monitor, integrated control panel and built-in disk drive. SP 1000 plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 50 mm, with a return lock and an open nozzle Nozzle radius 15 mm, nozzle opening 3 mm. Closing unit – Mold clamping force: kN 3000 – Mold opening force: kN 169 – Dimensions of the mounting plate (h x v): mm 995 x 1050 – Clearance between columns (h x v): mm 630 x 630 – Mold opening stroke: mm 820 – Minimum mold height: mm 330 – Opening width: mm 1150 – Ejector str ...

Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1060 x 1095 Clearance between columns (hxv) [mm] 710 x 710 min./ max. mold height [mm] min 380 Maximum opening width [mm] 1300 injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Injection weight [g] 393 Injection pressure [bar] 2304 Electric-hydraulic equipment Pump motor rated power [kW] 75 Dimensions and weight Net weight with control cabinet [t] 15.5 Dimensions (L x W x H) [m] 6.79 x 2.17 x 2.25

Clamping/injection matrix Clamping force [kN] 3500 Mounting plate dimensions (hxv) [mm] 1060 x 1095 Clearance between columns (hxv) [mm] 710 x 710 Min./max. mold height [mm] min 380 Maximum opening width [mm] 1300 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Shot weight [g] 393 Injection pressure [bar] 2304 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Dimensions and weight (approximately) Net weight with control cabinet [t] 15,5 Dimensions (L x W x H) [m] 6,79 x 2,17 x 2,25

Clamping force [kN] 3000 Dimensions of mounting plates (hxv) [mm] 995x1050 Clearance between columns (hxv) [mm] 630x630 Min./max. mold height [mm] min 330 Maximum opening width [mm] 1150 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 523 Injection weight [g] 476 Injection pressure [bar] 1904 Dimensions and weight Net weight with control cabinet [t] 12.5 Dimensions (length x width x height) [m] 5.97 x 2.04 x 2.36

Description: Serial number 254335 Clamping force 300 T Screw diameter 50 mm Tie bar spacing (H) 630 mm Tie bar spacing (V) 630 mm Shot volume 432 cm³ Shot weight 393 g Pressure on material 2304 bar Platen length 995 mm Platen width 1050 mm Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Control voltage 24 VDC Largest MTR FLA 34 A Short circuit current rating 10 KA dimension 45970 x 2040 x 2360 mm Weight 12.500 kg Approx. Onsite Dimension. (l x w x h): 45,970 x 2,040 x 2,360 mm, weight approx.: 12,500 kg

Description Working hours: 47.000 ...

• mais informação