This DOOSAN MYNX 5400/50 Vertical Machining center was manufactured in the year 2022 in South Korea and has 1452 production hours, of which 211 are cutting hours. It is equipped with a DN Solutions Fanuc i- Series control unit. The machine has a spindle speed of 6000 rpm. ...

• mais informação

Detalhes da máquina Número de stock 1105-03752 Centro de maquinação tipo máquina - vertical Faça DOOSAN DAEWOO Tipo MYNX 550 Ano de construção 2002 Tipo de controlo CNC Local de armazenamento HAGUENAU País de origem KORREA Prazo de entrega imediatamente Base de carga ex obras Detalhes técnicos longitudinal 1270 mm transversal 510 mm vertical 625 mm Mudança de ferramentas 30 pos. comprimento da ferramenta 250 mm diâmetro da ferramenta 80 mm ferramenta através. com caixa de vizinhos grátis. 130 mm Travessia rápida 30 m/min Peso da máquina ca. 8 t Potência de unidade 100% ED 15 kW Potência de unidade 40 % ED 13 kW Gama de velocidade 8000 1/min Suporte ...

Machine has been used only 300 hours Machine is still under warranty Machine is like new condition X Y Z = 2500mm x 950mm x 850mm ...

• mais informação

; Gross weight [kg]: 3600; Engine: Doosan DP126LB; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 625 ...

• mais informação

This DOOSAN Puma 4100B Horizontal Lathe was manufactured in 2018 in South Korea. It is equipped with a maximum workpiece diameter of 550 mm and a maximum workpiece length of 1042 mm. Controlled by a FANUC 0i Series control, it offers a spindle speed of 2000 rpm with a spindle power of 35 kW (30 min) / 22 kW (continuous). This machine accommodates 10 tools and features a A2-11 ASA taper size, providing versatility and precision in machining operations. It comes with chip conveyor, hydraulic, lubrication and cooling system. The machine has a run time of 796 hours, is still under power and can be inspected at any time.

Turning machining center Doosan type PUMA 1500 SY, bu, 2008 year, Fanuc CNC, overall dimensions 3118 1705, weight 4800 kg, power consumption 39.5 kVA, 4 pieces available! ...

• mais informação

This Doosan DNM 4500 Vertical Machining center was manufactured in the year 2021 in South Korea. It is equipped with a Fanuc i-Series control unit and has 4 axis. The machine has a spindle speed of 12000 rpm. ...

• mais informação

This Doosan DNM 6700 Vertical Machining center was manufactured in the year 2016 in South Korea. It is equipped with a Doosan Fanuc i-Series control unit and has 3 axis. The machine has a spindle speed of 12000 rpm. ...

• mais informação

This DOOSAN DNM 400A Vertical Machining center was manufactured in the year 2013 in Korea and has 37790 production hours. It is equipped with a Fanuc control unit and has 3 axis combined with an ISO 40 tool taper. The machine has a spindle speed of 8000 rpm and a spindle motor power of 11 Kw. ...

• mais informação

This DOOSAN DNM 500 (2012) 4-axis Vertical Machining Centre was manufactured in 2012 in South Korea. It is equipped with a 8,000 rpm spindle, BT40 tool taper, a 4th axis (lehmann rotary table - dividing head) and a FANUC control unit. The table size is 1200 x 540 mm (X-axis 1020 mm / Y-axis 540 mm / Z-axis 510 mm). As additional equipment it comes with chip conveyor and internal cooling (IKZ). The machine is in very good condition due to installation of a new spindle and refurbishment of the rotary table in 2021. The rotating union has also renewed recently in 2024. It has operated 24420 run time hours and 9802 cutting hours.