- X: 420 mm - Y: 330 mm - Z: 400 mm - Tamanho da mesa: 850 x 325 mm - Faixa de velocidade: 0 - 5000 rpm - Suporte do eixo: SK 40 - Passagem rápida: 12 m/min - Trocador WZ: 12 velocidades - Suporte de ferramentas: 40 SK - Peso máximo da ferramenta: 5 kg - Comprimento máximo da ferramenta: 220 mm - Ferramenta máx.: 63 mm - Controlo: Sinumerik 810 M - Horas de ligação: 40484 h - Potência total: 15 kW - Peso da máquina: 3200 kg - Dimensões (L x P x A): 2,4 x 2,3 x 2,45 m - Estado: bom, pronto para uso imediato Detalhes Uma estação de ferramentas está atualmente defeituosa, máquina compacta agradável, pode ser usada imediatamente Acessórios HILMA SM 125 ...

Centro de usinagem vertical, muito bom estado, eletrificado para visitar, com muitos acessórios Controle: Sinumerik 810D com Shopmill, Procedimento: X-420mm, Y-330, Z-240, Tabela: 850x325mm Eixo: SK40, 0 - 5000 rpm, 100Nm Taxa de alimentação: até 12000 mm/min ATC : 12 Pos. Dimensões: 230 x 240 x 245 cm, Peso: 2900kg incl. : 2 vícios da máquina, 30 suportes, sonda 3D, armário de ferramentas com ferramentas de fixação, fresadora,

This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit. ...

• mais informação

Controle Siemens 810 D com shopmill Curso X/Y/Z 420/330/240 milímetros Velocidade 5000 1/min Revista de ferramentas para 12 ferramentas SK 40 Superfície da mesa 850x325 mm Peso 2900 kg  ...

• mais informação

x-travel: 420 mm y-travel: 330 mm z-travel: 250 mm table surface area: 650 x 325 mm spindle taper: SK 40 spindle turning speed range: 0 - 5000 U/min power feed x/y/z: 6000/6000/8800 N rapid traverse: 12 m/min ATC: 12 Pos tool diameter: max. 63 mm tool length - max.: 220 mm control: SIEMENS SINUMERIK 820 D total power requirement: 15 kVA weight of the machine ca.: 2,6 t dimensions of machine L x W x H: 2,43 x 1,76 x 2,30 m Accessories: 2 hydr. vices HILMA NC 125, various tool holders, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 420 mm y-travel: 330 mm z-travel: 250 mm table surface area: 850 x 325 mm spindle taper: SK 40 spindle turning speed range: 0 - 5000 U/min power feed x/y/z: 6000/6000/8800 N rapid traverse: 12 m/min ATC: 12 Pos tool diameter: max. 63 mm tool length - max.: 220 mm control: SIEMENS, ShopMill total power requirement: 15 kVA weight of the machine ca.: 2,6 t dimensions of machine L x W x H: 2,40 x 2,33 x 2,30 m Accessories: 2 hydr. vices HILMA NC 125, various tool holders, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Fabrication number: 06AL3001 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 41 A Control system: SIEMENS SINUMERIK Tool holder: SK 40 Table dimensions: 2 x 850 x 400 mm With 2 x 3 grooves Incl. 4th axis (dividing head) With 24-position tool changer Spindle speed: 6000 rpm (not certain) Attention: screen is defective, therefore replacement monitor Attention: without tool holders and clamping devices that may be visible in the photos Travel distances: X: 1200 mm Y: 410 mm Z: 360 mm Distance from spindle nose to table surface: 175 - 535 mm Milling spindle: Spindle bearing: 60 mm diameter Tool holder: SK 40 Speed range: 0 - 6000 rpm Feed rate X-, Y- and Z-axis: 0.01 - 1 ...

Description: Fabrication number: 06-70R Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 41 A Control system: SIEMENS SINUMERIK Tool holder: SK 40 Table dimensions: 2 x 850 x 400 mm With 2 x 3 grooves Incl. 4th axis (dividing head) With 24-position tool changer Spindle speed: 6000 rpm (not certain) Attention: without tool holders and clamping devices that may be visible in the photos Travel distances: X: 1200 mm Y: 410 mm Z: 360 mm Distance from spindle nose to table surface: 175 - 535 mm Milling spindle: Spindle bearing: 60 mm diameter Tool holder: SK 40 Speed range: 0 - 6000 rpm Feed rate X-, Y- and Z-axis: 0.01 - 12000 mm/min Rapid traverse X-, Y- and Z-axis: 24 m/min Feed forc ...

CNC EMCO Turn E45 máquina com consola Siemens + alimentador de barras IEMCA Boss 545/21  ...

• mais informação

teach-in touch Siemens control Swing over bed: 515 mm Swing over cross-slide: 328 mm Distance centre tot centre: 1500 mm Dia of spindle bore: 108 mm (option ) Power on the spindle: 10 HP Number of speeds: 16 > 1500 rpm (option ) Command: Siemens Weight: 2270 kg  ...

• mais informação