máquinas para trabalhar metal / fresadoras / Fresadoras de mesa redonda
Fabricante: DMG MORI
Modelo:DMU 105 monoBLOCK
Tipo de máquina: Round table milling machines
Número do item: 168614114
Quantidade: 1
Data: 22.01.2026
Preço:
Seller-item-No.:011201
| General | |
| Universal milling machine in monoBLOCK construction; Control: 3D Control Heidenhain iTNC 530 HSCI | |
| Technical Data | |
| Rapid traverse longitudinal/transverse/vertical | 40/40/40 m/min |
| Feed rate longitudinal/transverse/vertical | 40000/40000/40000 mm/min |
| Working area 1 | |
| Longitudinal | 1050 mm |
| Cross | 1050 mm |
| Vertical | 750 mm |
| Tool changer | |
| Tool changer plane | vertical |
| Type of gripper | Double gripper |
| Number of tools | 60 |
| Max. tool length | 395 mm |
| Max. tool diameter with occupied adjacent pockets | 80 mm |
| Max. tool dia. with free neighbouring pockets | 160 mm |
| Direct measuring system | Direct path measuring system |
| Cabine | Full protection cabin |
| NC swivel rotary table tandem drive | NC swivel rotary table tandem drive Table plate C-axis: d 1,050 x 850 mm / 41.3 x 33.5 in integrated in rigid table 1,200 mm x 850 mm / 47.2 in x 35.5 in 1x T-slot 14 H7 (alignment groove, table centre) 12 x T-slot 14 H12 (clamping grooves) Permissible lo |
| Clamping hydraulics 2 channels proportional | Clamping hydraulics 2 channels proportional for connection of hydraulic clamping devices |
| Motor spindle SK 50 10,000 rpm 44kW 288Nm | Main drive: Motor spindle SK 50 disc magazine, 30 magazine pockets SK 50 incl. active cooling |
| Tool magazine, chain vert., 60 pockets | Tool magazine Vertical chain magazine basic with 60 tool pockets SK 50 or optional chosen spindle tapers |
| Speed range - 10000 rpm | |
| Torque (40% DC) 288 Nm | |
| Drive power (40% DC) 44 kW | |
| Spindle taper HSK-A 100 | Spindle taper for HSK-A 100 to DIN 69893 (incl. adaptation working spindle and tool magazine) |
| 3D quickSET extension package | 3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools) |
| Infrared measuring probe Heidenhain | Infrared measuring probe Type Heidenhain TS 649 SK 50 or optionally chosen spindle taper |
| Tool measuring in machining area Blum Laser | Tool measuring in machining area Type Blum Laser tool length and tool diameter measuring vertical |
| MPC Machine Protection Control | MPC Machine Protection Control Machine protection by quick shutdown |
| Coolant ring jet | Coolant ring jet for vertical headstock, 16 water jets, 7 air jets |
| Production package 40 bar/23 l/min, 600 l tank | Production package: Scraper flight conveyor with coolant unit 600 l / 160 gallon, paper band filter Discharge height: 950 mm / 37.4 in Width: 1,170 mm / 46 in Internal coolant supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD) (theo |
| Coolant tempering | Coolant tempering for internal coolant unit 600 lt / 160 gallon: Increased tank 980 lt / 259 gallon Heating capacity max.: 3,000 W / 4 hp Cooling capacity max.: 3,800 W / 5.1 hp |
| Spray pistol with pump | Spray pistol with pump 1 bar/40 l/min 14.5 psi/10.4 gallon/min (theoretical pump performance) |
| Cooling | Cooling by air blast through spindle centre, selection with M function |
| Oil and emulsion mist separator | Oil and emulsion mist separator Mechanical filter Throughput volume 1,100 m³/h |
| Tropical package (ambient temp. max. 50 °C) | Package for tropical climate for ambient temperature at machine location from 35° to 50° Celsius |
| Safety package for power failure | Safety package for power failure: Voltage control with fast deceleration trigger Uninterrupted Power Supply (UPS) for control Display of last executed program number |
| Special equipment | - Machine interface for automation - Communication software for connection to a host computer (DNC operation) - Package of measures for grinding - Special Knoll chip conveyor suitable for grinding operations - Preparation of the machine for a vacuum |
| Special equipment | RMS-Sensor |
| Special equipment | Adaptation clamping hydraulics: Channel 1: Release of a hydr. clamping system Installation of flow monitor with adaptation machines PLC Channel 2: Blow-out/rest control Channel 3: Vacuum (centric) |
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 65 H monoBLOCK | ||
| DMG MORI | DMU 75 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| 2017 | DMG MORI | DMU 75 monoblock | |
| 2010 | DMG MORI | DMU 60 MonoBlock | |
| DMG MORI | DMU 65 H monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMC 65 monoBLOCK |
| 2020 | DMG MORI | DMU 65 monoBLOCK 5-Axis | 82400 EUR | [Nov 2024] |
| 2010 | DMG MORI | DMU 40 MONOBLOCK | 115000 EUR | [Nov 2019] |
| 2015 | DMG MORI | DMU 50 | 125000 EUR | [Jan 2019] |
| 2021 | DMG MORI | DMU 50 2nd generation | 130000 EUR | [Nov 2024] |
| 2014 | DMG MORI | DMU 50 Ecoline | 49170 EUR | [Dec 2024] |
