| Plug-in board with 2x4 free
in-/outputs |
Inputs / outputs programmable via
M-functions, consisting of: 8 inputs 4 outputs, 2 amperes 4 outputs,
potential-free |
| Ext. number of tool data/tool
offsets |
Extended number of tool data and tool offsets to
3000 tool offsets at max. 1500 available tool data (max. 8 cutting
edges) |
| Excentric turning and milling
operation |
Excentric turning and milling operation (only with
Siemens control) |
| Technologie cycle alternating speed |
Technology cycle for the application of an
alternating speed for vibration sensitive set-ups (Only in conjunction
with Siemens control) |
| Multi-thread cycle 2.0 |
Multi-thread cycle 2.0 Cycle to create position
orientated threads with free contours, pitches and free number of
threads, e.g. for big transmission or special threads. Targeted
overlapping of threads with cross-holes, e.g. redirection systems with
bal |
| Easy Tool Monitor 2.0 |
Tool breakage monitoring Easy Tool Monitor 2.0
Simplified holistic view of the actual state of the tools in Side
screen of CELOS Setting of one monitoring limit for each tool selected
from the tool list. Easy teaching function to measure monitoring
limit |
| Chuck rinsing device, outside, main
spindle |
Chuck rinsing device for main spindle,
outside |
| Chuck rinsing device, outside, counter
spindle |
Chuck rinsing device for counter spindle,
outside |
| Dynamic two-pressure clamping at the
control, MS |
Dynamic two-pressure clamping at the control for
the main spindle The clamping pressure can be specified by NC
program |
| Dyn. two-pressure clamping, motor-adj.
valves CS |
Dynamic two-pressure clamping for the counter
spindle with motor-adjustable valves The clamping pressure can be
specified by the NC program |
| Coolant supply through the counter
spindle |
Coolant supply through the counter spindle |
| Tailstock function for counter
spindle |
Tailstock function for the counter spindle,
mechatronic control of the supporting force, selectable per program
Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force
250-1200 daN, CTX gamma TC |
| Counter spindle ISM 65, A2-8 |
Counter spindle as integrated spindle motor, ISM
65, A2-8 - Drive power 14/17 kW (18.7/22.7 hp) (S1-100%d.c. /
S3-40%d.c.), - Torque 275/345 Nm (202.8/354.4 lbft) (S1-100%d.c.
/ S3-40%d.c.), - Speed range 0-5.000 rpm - Partial hollow clampin |
| Hinged type chip conveyor |
Hinged typ chip conveyor incl. coolant tank and
coolant pump, 6 bar (87 psi)/20 litre/min |
| Filter element for double cartridge
filter |
Filter element for double cartridge filter, Mahle
or Hydac Number of units: 1 D4652871 Notice: These are reusable
metal filters that can be cleaned in an ultrasonic bath |
| BFU 8/20 bar, 980 l, cooler |
Compact coolant system, consisting of: - coolant
tank, 980 litre 8 bar/20 litre/min (CTX beta 2000 TC, CTX gamma TC
2nd: 8 bar/80 l/min) and 20 bar/25 litre/min (theoretical pump
performance) programmable via M-functions coolant supply
through |
| Mechanical oil mist extractor
1100m³/h |
Mechanical oil mist extractor, 1100 m³/h (38,830
ft³/h) with dirtiness indicator, class of filtration H13 |
| Chain magazine for 60 tools |
Chain magazine 60fold, instead of chain magazine
30fold |
| Workpiece touch probe RMP40,
Renishaw |
Workpiece touch probe RMP40, Renishaw -
Interchangeable in turning/milling spindle - Probe reception and
tracer point with data transfer between probe and receiver by
radio signals - Incl. measuring cycle package Inspection Plus Notes:
- Custom meas |
| Automatic actuation of sliding cover,
electrical |
Automatic actuation of sliding cover, electrical.
(Remark: option B-L7250, automatic loading hatch is not possible) |
| Interface for bar feed/loading
magazine |
interface for bar feeder or bar loading
magazine |
| Electrical interface for Robo2Go |
Electrical interface standard Profibus for Robo2Go
(Only at Siemens control) Incl. - Additional compressed air supply -
Additional Ethernet interface - Power supply of the robot by the
machine - User interface integrated into CELOS (with CELOS 3
as |
| Collet chuck Axfix Ø 65 mm |
SPANNTOP collet chuck with fixed stop, type Axfix,
Ø65 mm (Ø2.56 in), clamping without axial movement, incl. connecting
elements |
| SPANNTOP nova Kombi pull-back, size 65,
Hainbuch |
SPANNTOP nova Kombi pull-back collet chuck for
quick change clamping heads, size 65, make Hainbuch, incl. connection
elements |
| Package for tropical climate (ambient
temp.50ºC) |
Package for tropical climate for ambient
temperature of max. 50ºC, consisting of cooling system for control
cabinet (until 50º) and machine |
| Window rinsing of the security
window |
Window cleaning of the security window of the
working area door by compressed air (Remark: The employment of coolant
can limited the view on the workpiece at machining) |
| BDE, Extended interface (8 from > 40
signals) |
Signal provision for shop floor data collection.
Extended interface. There are 8 of > 40 signals potential-free
contacts provided. If an order is placed, the corresponding form must
be requested from the factory. |