x-travel: 1000 mm y-travel: 800 mm z-travel: 900 mm control: HEIDENHAIN type: TNC 530 itnc mm rotary table dia.: 600 mm spindle taper: HSK 63 turning speeds: 18000 U/min workpiece weight: 3000 kg Tool changer: 30 Pos. : table - swivable: Grad total power requirement: . kW weight of the machine ca.: 12 t dimensions of the machine ca.: . m DEPO DYNAMIC 1009 • X axis (milling unit/cross slide move across): 1,000 mm • Y-axis (crossbar moves lengthways): 900 (+170) mm • Z-axis (milling unit moves vertically): 600 mm • Feed / rapid traverse X, Y and Z axis: 40,000 mm/min • Acceleration X, Y and Z axis: 5 m/s2 • Workpiece carrier – clamping surface (X/Y): 1,200 x 1,000 mm • Distanc ...

Comprimento do quadro: 1300 mm Largura: 850 mmLongitudinal X: 1200 mmCross Y: 800 mmVertical Z: 700 mmPositions ATC: 16 Posições APC: 0 CNC Marca: HeidenhainCNC Modelo: TNC 426 DEPO - DEPOJET 8 Coluna dupla VMC 1200 x 800 x 700 mm MACH - ID 6343 Fazer: DEPO Tipo: DEPOJET 8 Controlo: HeidenHain TNC 426 YOP: 2000 X – Viagem    1.200 mm Y – Viagem       800 mm Z – Viagem       700 mm Comprimento da       mesa 1.300 mm Largura da            tabela 850 mm Carga de              mesa 1.500 kg Taxa de alimentaçã ...

x-travel: 1000 mm y-travel: 800 mm z-travel: 700 mm Control: HEIDENHAIN iTNC 530 total power requirement: 50 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• mais informação

Tool holder, tool magazine, tool holder, milling holder, milling tool -1 recording: HSK80 -for tool changers -Shrink chuck collet flat chuck reducing sleeves cutter head shell end mill -Weight: 2 kg ...

• mais informação

This DEPO HF milling machine was made in the year 2012 and has 7 axis. The Stable 7-axis machine is specially developed for the manufacture of tools, molds and matrices. ...

• mais informação

Collet holder, tool holder, tool holder, milling holder, milling tool, short-shaft system -Manufacturer: DEPO, milling mount SK50 -Type: 100 5 77 -Milling tool holder: conical, Ø 34/24 mm M16 -Dimension total Ø97x385mm -Weight: 5.9 kg ...

• mais informação

x-travel: 1.650 mm y-travel: 810 mm z-travel: 810 mm control: TNC 426 Heidenhain Main spindle:: turning speed range - main spindle: 30 - 6.000 min/-1 power capacity - main spindel: 20,5 / 17 kW transmission ratio: 2 max. Torque: 650 Nm tool taper: SK 50 spindle bearing diameter: 90 mm distance spindle /table: 110 - 920 mm distance spindle center to column: 990 mm work height max.: 1.000 mm work table:: table surface area: 1.800 x 780 mm number of T-slots: 5 T-slot - width: 18 mm T-slot - distance: 150 mm max. table load: 1.750 kg max. workpiece sizes: 1.650 x 810 x 450 mm feeds:: feed speeds: 0 - 20.000 mm/min rapid traverse: 20 m/min Tool-Presetter:: number of toolpositions: 16 pos. max ...

Description: amount 5 pieces weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm ...

• mais informação

x-travel:1270 mm y-travel:610 mm z-travel:760 mm size of pallet:1.320 x 620 mm table load capacity:1350 kg pallet worktable capacity:900 kg spindle taper::SK 50 spindle turning speed range:8000 1/min spindle drive:20/30 kW max. torque on the spindle:306 / 458 Nm feed speeds:1-40.000 mm/min tool change unit:24 Pos. CNC-control:iTNC 530 HEIDENHAIN total power requirement:35 kVA weight of the machine ca.:10 (8+2) t dimensions of the machine ca.:3,5 x 2,4 x 3,1 m CNC vertical machining center with 2 pallet-changer, internal coolant supply, internal air blast, minimum quantity lubrication, 3D touchprobe HEIDENHAIN, tool measuring system RENISHAW TS 27R, direct measuring system, chipconveyor, no a ...

Máquina para a conclusão do conjunto de tiras de isolamento Fabricante: Aluro Tipo: BTM 100908-190 Ano de construção: 2005 Localização: Zweibrücken - Roll-in abaixo de 90° em 1 passe - Castoras de retenção ajustáveis separadamente - 4x2 moldes horizontais de retenção na parte superior e inferior com superfícies revestidas a Vulkollan - Correção para o alinhamento reto dos perfis - Parar com o interruptor de segurança - Demonstração de posição e pressão com visor, correção da deformação mecânica após a colocação Teremos todo o gosto em enviar-lhe mais informações a pedido.