spindle diameter: 125 mm x-travel: 3000 mm y-travel: 1500 mm control: Heidenhain TNC 355 taper ISO: 50 w-axis: 600 mm Table dimensions: 1200 x 1500 mm table load: 5 t spindle turning speed range: 12 - 2300 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3.000 mm y-travel: 2.500 mm z-travel: 2.475 mm w-axis: 800 mm rotary table: Juaristi MG-12 Rotary table surface: 2.000 x 2.500 mm T-slots: 11 T-slot - width: 170 mm table weight: 8.000 Kg table rotation: B- Achse – 0,001 ° Control: HEIDENHAIN i TNC-530 diameter of quill: 130 mm speed: 3.000 U/min tool taper: ISO 50 DIN 69871/1-B milling head: swivelling +/-: 2,5/2,5 Grad spindle drive: 30 kW transmission ratio: 2 speeds:: 0-2.500 U/min boring spindle: D`ANDREA UT5-800-S mm/min diameter: 800 mm cross travel: 250 mm Tools changer: 30 pos. Internal cooling system: 20 bar Chip coveyor: Inkl. handwheel: HEIDENHAIN HR-420 weight of the machine ca.: 45 t dimensions of the machine ca.: ...

Fabricante JUARISTI Modelo TX1-D Ano 2008 CNC HEIDENHAIN TNC-530 Tabela Tipo de tabela Juaristi MG-6 Superfície da mesa 1.250 x 1.600 mm. Max peso permitido na mesa 5.000 kg. Rotação da Tabela (Eixo B) 0,001º 360.000 pos. Viagens Curso da mesa (eixo X) 2.700 mm. Curso vertical (eixo Y) 1.500 mm. Curso transversal (eixo Z) 1.500 mm. Eixo controlado X, Y, Z, B Travessia Rápida 25.000 mm/min Cabeça Tipo de cabeça Birrotativo 2, 5º / 2, 5º Taper ISO 50 DIN 69871/1-AD Velocidade 871-3.000 rpm Intervalos de velocidade 2 Gama inferior 5-871 rpm Faixa superior 871-3.000 rpm Potência máxima do eixo 37 kW Torque máximo do eixo 1646 Nm. Equipamento adicional Tro ...

Manufacturer: JUARISTI Model: MDR-130-CM Boring machine Travels (xyz): 5000 x 3000 (up) x (800-900 + 1500 table) Weight on table:20 tm Rototranslanting table of 3000x2000 x 1500 of translation FAGOR read-outs Manual HURON head ...

• mais informação

spindle diameter:150 mm x-travel:5100 mm y-travel:3600 mm w-axis:1950 mm z-axis:1000 mm spindle drive:52 kW spindle turning speed range:5 - 1600 U/min spindle taper ISO:50 B-axis (table):0,001 ° table surface area:2500 x 2500 mm table load:30 to workpiece swing dia.:~6000 mm weight of the machine ca.:58 t total power requirement:85 kW dimensions of the machine ca.:10,5 x 8,6 x 6,9 m Machine retrofit and overhouled in 2007 with HEIDENHAIN TNC 530 control - angular milling head - exhauster - coolant device

spindle diameter: 110 mm x-travel: 4440 mm y-travel: 1500 mm z-axis: 400 mm turning speeds: 7-1000 U/min Tool bore: SK 50 spindle stroke: 800 mm digital readout: total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m optional with floor plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 205 mm x-travel: 10000 mm y-travel: 2500 mm w-axis: 500 mm spindle travel: 1250 mm Control: Heidenhain type: TNC 355 spindle taper ISO: 50 transmission ratio: 2 feed - independent: 0-3000 mm spindle motor: 37 kW total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: 14,1x3,2x5,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diâmetro do fuso: 105 mm x-viagem: 1000 mm y-viagem: 1000 mm total requisito: kW peso da máquina ca.: t dimensionais da máquina ca.: m Brand: Juaristi Type: MDR105 CNC C Marca CNC: Modelo Heidenhain CNC: TNC145 Year of make: 1983 Tese: 1.000 mm Se largura: 1.000 mm X: 1.000 mm Y: 1.000 mm Z/W: 1.000 mm Spindle taper: ISO 50 Spindle diâmetro: 105 mm ø

x-travel: 4000 mm y-travel: 1500 mm z-travel: 3500 mm control: Siemens 840 D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine was producing parts of airplane Motors for Rolls Royce. Machine very little used and as new. Machine with 2 pallet tables, diamter 1500 mm 2 x ATC 40 tool changer Automatic milling head 1ºx1º indexing, 37 kW Max. spindle speed 5000 rpm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 200 mm x-travel: 8000 mm y-travel: 3000 mm z-travel: 1500 mm taper ISO: 50 : 5 - 3500 U/min/rpm transmission ratio: 2 Motor output: 37 kW Torque: 1300 Nm : SELCA S4040DH : 40 fach/tools : 15 bar w-axis: 1500 mm ram diameter: 460 x 520 mm total power requirement: 100 kVA weight of the machine ca.: - t dimensions of the machine ca.: - m Boring and milling machine Juaristi MX-7 equipped with: - CNC control SELCA S4040DH - frequency converter SIEMENS - automatic milling head with 2,5° x 2,5° pitch - tool magazine 40-fold (ISO 50) - Panel field 8000x1500 mm - External and internal coolant system, external coolant 40 l/min and 3 bar, internal coolant system 20 l/min and 15 bar  ...