Fabricante:
(Categoria: 1406)
Lippert Belt Conveyor Riser with Arch and Straight GF 6105-650-500 RA1448 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6105 mm (ascending conveyor 3180mm + arch 500mm + upper straight 2425mm)Framework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor S37 DT80N4/MM07/BW1Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1Deflection roller ...
Lippert belt conveyor inclined belt GF 3100-650-500 RA1494 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3100 mm (upper straight 470mm + inclined belt 2630mm)Framework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor S37 DT71D4/MM03/BW1Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1Deflection roller (UR): Ø = 34 mmDrive drum (AT): ...
Lippert belt conveyor GF 1810-650-500 RA1438 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1810 mmFramework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1Deflection roller (UR): Ø = 34 mmDrive drum (AT): Ø = 81 mmBelt: Type SNB-8EYear of construction: 2001 Optio ...
Lippert Belt Conveyor Riser with arch and straight GF 6150-650-500 RA1440 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveyor length (NL): 6150 mm (ascending conveyor 2310mm + upper straight 3840mm)Framework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor S37 DT80N4/MM07/BW1Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1Deflection roller (UR): Ø = 34 ...
Transnorm Rising falling Incline with arch belt conveyor GF 15670-900-800RA2086Technical data:Conveyor length (NL): 15670mm (14870 mm incline + 800 mm arch)frame width (NB): 900 mmbelt width (GuB): 800 mmOverall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15°Supporting feet: optionally availableConveying speed (v m/s): Frequency converter for stepless speed controllDrive: SEW gear motor, R27 DRE80M4BE1/MM15/LNElectrical data: 50Hz V380-500, kW 1,1 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2014condition: good (used)Conveying length in mm: 15670Nominal / outside width in mm: 900Belt width in mm: 800Driven: YESEngine type: SEW Eur ...
Transnorm Rising falling Incline belt conveyor GF 9820-700-600RA2087Technical data:Conveyor length (NL): 9820 mm (6000 mm riser segment + 3820 mm forerun)frame width (NB): 700 mm, 800 mm with motorbelt width (GuB): 600 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): 0,42Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LNElectrical data: 50Hz V380-500, kW 0,75 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2014condition: good (used)Conveying length in mm: 9820Nominal / outside width in mm: 700Belt width in mm: 600Driven: YESEngine type: SEW Eurodrive Zentralantrieb mi ...
Transnorm conveyor belt GF 5700-600-500RA2091Technical data:Conveyor length (NL): 5700 mmframe width (NB): 600 mm, 700 mm with motorbelt width (GuB): 500 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed.Drive: SEW gear motor R32DT71D4Electrical data: 50Hz V380-500, kW 0,37 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 1998condition: good (used)Conveying length in mm: 5700Nominal / outside width in mm: 600Belt width in mm: 500Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: ...
Transnorm conveyor belt GF 21730-700-600RA2090Technical data:Conveyor length (NL): 21730 mm frame width (NB): 700 mm, 800 mm with motorbelt width (GuB): 600 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): 0,75Drive: SEW gear motor R27 DT90S4/THElectrical data: 50Hz V380-500, kW 1,1 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2014condition: good (used)Conveying length in mm: 21730Nominal / outside width in mm: 700Belt width in mm: 600Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 1,1/S1Conveyor speed m / s: 0,75scope of delivery: wit ...
Transnorm Rising falling Incline with arch belt conveyor GF 5140-600-500RA2082Technical data:Conveyor length (NL): 5140 mm (4640 mm incline + 500 mm arch)frame width (NB): 600 mm, 700 mm with motorbelt width (GuB): 500 mmOverall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15°Supporting feet: optionally availableConveying speed (v m/s): please contact usDrive: SEW gear motorElectrical data: 50Hz V380-500, kW 0,75 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2014condition: good (used)Conveying length in mm: 5140Nominal / outside width in mm: 600Belt width in mm: 500Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit Spannstatio ...
Lippert belt conveyor GF 22500-900-700RA2085Technical data:Conveyor length (NL): 22500 mmframe width (NB): 900 mmbelt width (GuB): 700 mmOverall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed.Drive: SEW gear motorElectrical data: 50Hz V380-500, kW 0,75 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: condition: good (used)Conveying length in mm: 22500Nominal / outside width in mm: 900Belt width in mm: 700Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 0,75/S1Conveyor speed m / s: bitte Kontaktierensc ...
Transnorm Rising falling Incline with arch and forerun belt conveyor GF 12965-700-600RA2076Technical data:Conveyor length (NL): 12965 mm (3000 mm forerun + 6865 mm incline + 3100 mm arch)frame width (NB): 700 mm, 800 mm with motorbelt width (GuB): 600 mmOverall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15°Supporting feet: optionally availableConveying speed (v m/s): Frequency converter for stepless speed controllDrive: SEW gear motor, R27 DRE80M4BE1/MM15/LNElectrical data: 50Hz V380-500, kW 1,1 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2014condition: good (used)Conveying length in mm: 12965Nominal / outside width in mm: 700Be ...
Transnorm conveyor belt GF 16280-700-600RA2075Technical data:Conveyor length (NL): 16280 mm frame width (NB): 700 mm, 800 mm with motorbelt width (GuB): 600 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): 0,42Drive: SEW gear motor, R27 DT90S4/THElectrical data: 50Hz V380-500, kW 1,1 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2014condition: good (used)Conveying length in mm: 16280Nominal / outside width in mm: 700Belt width in mm: 600Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 1,1/S1Conveyor speed m / s: 0,42scope of delivery: wi ...
Transnorm conveyor belt GF 1500-600-500RA2070Technical data:Conveyor length (NL): 1500 mm frame width (NB): 600 mm, 700 mm with motorbelt width (GuB): 500 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed.Drive: SEW gear motorElectrical data: 50Hz V380-500, kW 0,37 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2014condition: good (used)Conveying length in mm: 1500Nominal / outside width in mm: 600Belt width in mm: 500Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 0,37/S1C ...
Lippert belt conveyor GF 780-650-500 RA1430 The Lippert conveyor belt is from 2001 and in good (used) condition. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 780 mmFramework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): with frequency converte adjustable Drive: SEW gear motor R17DT71D4/MM03/BW1Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1Deflection roller (UR): Ø = 34 mmDrive drum (AT): Ø = 81 mmBelt: Type SNB-5EYear of construction: 2001 Optionally available: motor with MOVIMOT frequency inverter to control the speedSupportsSide guide one and bo ...
Lippert belt conveyor GF 1095-650-500 RA1431 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1095 mmFramework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor R17 DT71D4/M ...
Lippert belt conveyor GF 22250-650-500 RA1426 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 22.250 mmFramework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1Deflection roller (UR): Ø = 64 mmDrive drum (AT): Ø = 81 mmBelt: Type NNT-10 ENBUYear of construction: 200 ...
Lippert belt conveyor GF 1300-650-500 RA1424 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1300 mmFramework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1Deflection roller (UR): Ø = 34 mmDrive drum (AT): Ø = 64 mmBelt: Type SNB-5EYear of construction: 2001 Optio ...
Mecalux roller conveyor roller conveyor with passage gate 24V 695+580-540-450 RA1904 Make: MecaluxRoller width (RB): 450 mm, Steel rollsNominal/outer width (NB): 540 mmlength: 695 mm + 580 mm passageRolls diameter: 50 mmRoller distance 75 mmOverall height frame: 130 mmHeight with support: 750 mm 2x ITOH-Deki 16936/010 24V Roller driveConveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: with supports Optionally available:Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017Electric data: 24V ITOH-Dekicondition: very good (used)Conveying length in mm: 695+580Nominal / outside width in mm: 540Roll width in mm: 450Roll division in mm: 75Driven: YESscope of delivery: including supportsFor individual, professional advice, simply contact us. Simply c ...
Lippert belt conveyor GF 950-650-500 RA1409 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 950 mmFramework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm Support feet optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor S37 DT71D4/MM03/BW1Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1Deflection roller (UR): Ø = 34 mmDrive drum (AT): Ø = 64 mmBelt: Type SNB-5EYear of construction: 2001 Optionall ...
Technical details: RA1025 Manufacturer: Caljan Type: belt curve 60° CC 080 XBK 641 / 054 Year of construction: 2008 Angle: 60° Direction: Left Nominal radius: approx. 600 mm Width: 500 mm Conveyor speed: v = 17 m / min v = 0.28 m / sec Top height cheek: 860 mm + 200 adjustment Strap type: E12/2 UO/U6S GSTR C black Number: 1 x (article no. 20140027) Condition: Used / fully functional Color: Blue (RAL 5002) More information: incl. 2 supports Gear motor Manufacturer: LenzeFeatures: Construction year: 2008condition: very good (used)Nominal / inner radius in mm: 600Belt width in mm: 500angle: 60°Driven: YESRunning direction: LEFTEngine type: Lenze GetriebemotorConveyor speed m / s: 0,28scope of delivery: including supportsFür eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen ...
Transnorm curved belt Conveyor 45° links 670-500 IR1100 RA1083 The Transnorm curved belt is from 2017. It is as good as new (used) and fully functional. It has an engine of the brand SEW. Columns are not included in the scope of delivery. These are optionally available. curved belts are often used in intralogistics for in-house transport of piece goods and are indispensable for modern distribution centers. Transnorm curved belts convince with performance and reliability. Long operating times are no problem thanks to a low-voltage drive over the entire belt width. Conical drums and a specially developed belt guidance system ensure maximum smooth running. Technical data: Manufacturer: Transnorm Type: TS 1600-105 FH2 curved belt 45° links Built: 2017 Condition: as good as new (used) Engine: fully functional Angle: 45° Running direction: left Inner radius (IR): 1100 mm Nominal/out ...
Lippert belt conveyor GF 780-650-500 RA1450 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 780 mmFramework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor S37 DT71D4/MM03/BW1Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1Deflection roller (UR): Ø = 34 mmDrive drum (AT): Ø = 64 mmBelt: Type SNB 5 EYear of construction: 2001 Optiona ...
Lippert belt conveyor GF 1290-650-500 RA1392 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1290 mmFrame width (NB): approx. 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm Support feet optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor S37 DT71D ...
Lippert belt conveyor GF 1090-650-500 RA1393 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1090 mmFramework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor S37 DT71D4/MM03/BW1Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1Deflection roller (UR): Ø = 34 mmDrive drum (AT): Ø = 64 mmBelt: Type SNB 5 EYear of construction: 2001 Optio ...
Lippert belt conveyor GF 1045-650-500 RA1367 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mmFramework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor R17 DT71D4/M ...
Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105Conveying length middle radius (NL): 766 mmFrame w ...
Pesa Correia de alimentação 1,2 m Transportador de correia 60 cm Pesa Comprimento: 1195 mm Largura da correia: 600 mm Proteção contra ingresso: IP54 3x400 V CA 0,37 kW 0,6 m/s Ano: 2008 Mais artigos - novos e usados - podem ser encontrados na nossa loja! Custos de envio internacional sob consulta!
Propriedades: Estado: totalmente funcional, com sinais de desgaste Ideal para o transporte rápido de materiais Habilmente desmontado e embalado Transportador de correia/ Correia/ Correia transportadora Fabricante: Gawronski GmbH Ano construção: 2019 Tipo de máquina: Correia Estado: Usado Comprimento total: aprox. 15000 mm Largura total incluindo motor: aprox. 1170 mm Largura total sem motor: aprox. 970 mm Largura de transporte: aprox. 900 mm Largura da correia: aprox. 880 mm Tipo de correia: sulcos longitudinais Caixilharia em aço Altura estrutura: aprox. 185 mm Cor: preto/amarelo Incluído: Motor SEW com inversor Em stock: 2 peças Preço por sistema Devido ao excelente acabamento do transportador de rolos, seu material desliza suavemente até o seu destino, mesmo sob cargas elevadas. Soluções à medida para a sua intralogística Para trans ...
Förderbaänder 16 A 380 V Corredores lentos Comprimento 90 cm Largura 15 cm Altura 15 cm
Sistema completo de transportador de rolos Schäfer Super barganha para auto-desmantelamento em Neuss Centro logístico com todas as correias transportadoras, transportadores de rolos e peças de reposição. Mais de 3 pisos Ano construção: 2008 O sistema transportador de rolos Schäfer é um sistema transportador de última geração que foi especialmente desenvolvido para a movimentação eficiente e precisa de mercadorias e produtos em vários andares. Com seu design robusto e controle inteligente, o sistema oferece uma solução confiável e flexível para o transporte interno em instalações de produção, centros logísticos e armazéns. O sistema de transportadores de rolos consiste em uma série de transportadores de rolos dispostos horizontal e verticalmente para garantir o movimento contínuo de mercadorias entre diferentes níveis. Através do uso de rolos ajust ...
Dr. Sonntag
