Fabricante: Biesse , Tipo: Stream B1 S3, Ano: 2005, Controlo: NC 1600, Material de borda Min-max mm: 20, Largura da peça de trabalho min-max mm: 65, Min.-max. comprimento da peça de trabalho em mm: 150, Min.-max. altura da peça de trabalho em mm: 60, Alimentação Min-max m/min: 25, Min.-max. batten magazine mm: 20, Moagem de Bevel: sim, moagem de raio: sim, raspador de raio: sim, unidade buffing: sim, Ano :2005

Description: serial number: 1000017130 control: BIESSE  , max. glue thickness: 3 mm max. glue-on height: 65 mm max. thickness of roll material: 3 mm min. workpiece length: 100 mm min. workpiece width: 150 mm max. workpiece thickness: 90 mm max. feed rate: 25 m/min.  , comfortable looptec system BIESSE 2 glueing units in the row (exchange of color from panel) CNC set up off all machine from panel maximum thickness of panel: up to 90 mm Nordson system for PUR included (wtih conecton to one gluing unit) airforce system change of glue + tape based on the barcode CNC grooving unit  , please also have a look at the video and the PDF documents of this machine ser ...

Description: Max. panel height 60 mm Max. edge thickness 3 mm Pressure with rubber belt NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit Constructor model : RT20 motor power : 2 KW r.p.m. : 9000 RPM Edge coil magazine no. positions 6 Gluing system yes glue pot for EVA hot melt glue premelter for EVA hot melt glue no. pressure roller 3 No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : IT90 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming Constructor model : RS10 no. motors : 2 motor power : 0.75 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS  ...

Description: Max. panel height 60 mm Max. edge thickness 3 mm Max. forward feed speed 24 m/min Top pressure , NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit Constructor model : RT20 automatic timed intervention : , motor power : 2 KW r.p.m. : 9000 RPM Edge coil magazine , no. positions 6 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : IT90 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming Constructor model : RS10 no. motors : 2 motor power : 0.7 ...

Description: Position: 1 SubFamily: Edgebander BATCH 1 Brand: BIESSE Model: STREAM B1 10.5 MDS Type of edging Thin edge Thick edge Gluing System EVA Hotmelt  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , Premilling Unit , Corner Rounding Unit Grooving Unit , Maximum panel thickness 60 mm Max. panel height 60 mm Min. panel length 150 mm Min. panel width 65 mm Min. edge thickness 0.3 mm Max. forward feed speed 25 m/min Pressure with rubber belt Panel support guides , with positioning by NC , Infeed panel alignment system , MDS No. Panel Sizing / Milling units Unit : pre-milling unit automatic tim ...

Description: serial number: 36789 Technical specifications: total installed power 33 kW, 63A, 50Hz panel length - min 150 mm - max 3200 mm panel width - min 120 mm - max 3200 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.30 mm to 3 mm workpiece thickness from 10 mm up to 60 mm edgebanding strip height - min 15 mm - max 65 mm working line height 950 mm panel projection from drive belt 50mm adjustable feed speed from 10 m/min up to 24 m/min motorized height adjustment CNI control, display replaced with a flat screen anti adhesive spraying device joint cutting unit, 2 x motor 5kW, 12.000 rot/min edge feeder for roll, edge magazine for two edge rolls  ...

Description: - Edge banding machine - Serial number 37082 - Total installed power 32 KW - Edge thickness in strips up to 20 mm - Edge thickness in the roll from 0.30 mm to 3 mm - Workpiece thickness from 10 mm up to 60 mm - Adjustable feed speed from 10 m/min up to 24 m/min - Feed motor 5.50 KW - Motorized height adjustment - CNI control - Joint cutting unit, 2 x motor - Edge feeder for strips and roll, edge magazine for one edge roll - NORDSON MC 12 gluing unit for PUR adhesive - Pressure unit with (1+6) rollers - Snipping unit, 2 x motor - Rough trimming unit, 2 x motor (upper motor missing) - Fine trimming unit, 2 x motor 0.65 KW-12000 rpm - Profile trimming unit, 2 x motor - Profile scra ...

Dowel perfuração e máquina drive-in Biesse tipo F/S Dados técnicos: • Cabeça de broca: 21 fusos • Pistolas de cola: 6  ...

• mais informação

Detalhes técnicos: - Unidade de pré-fresagem - Unidade de arredondamento de canto - Espessura máxima do painel: 65 mm - Unidades Operacionais: 9  ...

• mais informação

Código: 0144 Marca: POLYMAC BIESSE GROUP Modelo: SINGLE 89-N - Norme CE Máquina de aparar bordas para bordas retas e moldadas, para bordas em madeira, folheado, PVC, laminado plástico, etc. - Padrão CE Dados técnicos: Altura de trabalho até 120 mm Espessura da aresta 0,4 - 3 mm Raio de curvatura mínimo 20 mm Comprimento mínimo do painel mm 300 Unidade Trimmimg composta por 2 motores sobrepostos Mesa de trabalho inclinável de 0 a 45 graus Velocidade de alimentação 2/18 mt/min Potência total absorvida Kw 5,2 Barra de pressão de trabalho 6 Dimensões totais mm 1300 x 900 x 1200 h Peso kg 350