Centering ring diameter on the plate is 160 mm (not the standard 125 mm) This machine was regularly maintained and has CE norms. Type of used material: PBT GF 30 ABS/PA PP Service history: 3.2015 – Replacing the CF card reader with a floppy disk drive 5.2013 – Machine calibration 5.2009 – Machine calibration

N.º de Stock: 503181 Fabricante: ARBURG Tipo: Allrounder 470 E 1000-290 Controlo: Selogica Ano construção: 2012 Horário: 47142 h Força de fixação: 1000 kN Azinheira h x w: 470 x 470 mm Tamanho da placa h x w: 637 x 637 mm Altura mínima de instalação: 250 mm Altura máxima de instalação: 500 mm Espaçamento entre placas máx.: 850 mm Curso da abertura: 350 mm Diâmetro do parafuso: 35 mm Deslocação: 144 cc Pressão de pulverização: 2000 bar Dimensões da máquina CxLxA: 4.4m x 1.62m x 2m Peso Total: 5280KG Equipamentos Texto no ecrã Alemão Soquete CEE 16A Válvula de ar 1x Máquina com bateria de água Máquina com bateria de água  ...

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 106 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 2120 bars CLOSING UNIT Closing force: 1300 kN Mold thickness Mini / Max: 225/275 mm Max distance between tray: 800 mm Passage between columns: 470 x 470 mm Tray size: 650 x 650 mm GENERAL Heat output: 22 kW Total installed power: 33.9 kW

Description: Machine number: 211355 Operating voltage: 400V Frequency: 50Hz Control voltage: 230 V Rated current: 80 A Total rated current: 118 A Total connection: 62 kW Closing force: max. 1100 kN Closing force: max. 50 kN Opening force: max. 34/255 kN Opening distance: max. 500 mm Tool installation height: at least 250 mm Distance between the clamping plates: max. 750 mm Light column spacing: 470 x 470 mm Tool platens: 637 x 637 mm Weight of movable tool halves: max. 760 kg Ejector force: max. 40 kN Ejector path: max. 175 mm Screw diameter: 30 mm Effective auger length: 20 Snail travel: max. 120 mm Calculated displacement volume: max. 85 cm³ Shot weight: max. 77 g P ...

Description: Machine number: 175808 Operating voltage: 400 V Frequency: 50 Hz Heating connection: 14.9 kW Pump motor: 30 kW Total connection: 44.9 kW Clamping force: 1600 kN Screw diameter: 50 Platen dimensions: 780 x 700 mm Approx. Onsite Dimension. (l x w x h): 5,000 x 1,800 x 2,100 mm, weight approx.: 6,600 kg

This ARBURG ALLROUNDER CENTEX 470 C 1500-800 Injection moulding machine was manufactured in 2007 in Germany. It has a clamping force of 1500 kN, an opening stroke of 650mm and is equipped with an injection unit with 50mm screw diameter. The plate dimensions are 715x715 mm and light between columns is 470 mm. It is still under power and can be inspected on-site anytime.

Unidade de fecho Força de aperto t: 200 Caminho de abertura mm: 650 Tamanho de holm mm: 470 x 470 Altura de instalação min/max mm: 300/950 Tamanho da placa: 715 x 715 Unidade de pulverização Diâmetro do parafuso mm: 45 Spray peso gr: 240 Volume de pulverização cm3: 286 Dimensões e pesos Dimensões LxWxH m: 5,8 x 2,1 x 2,1 Kg de peso da máquina: 7800 Outros - 1 núcleo - interface robot Euromap 12

com - Diâmetro do parafuso: 60 mm - Força de aperto: 200 kN - Volume de injeção: 508 cm? - Curso de abertura de molde máx: 650 mm - Altura do molde min: 250 mm - Tamanho das plaquetões (h x v): 715 x 715 mm - Distância entre tie-bars (h x v): 470 x 470 mm - Horário de funcionamento: 60.000 - Potência: instalado máximo: 15 + 30 kW - Peso: 6.630 kg - Dimensões (longas x largas x altas): 6.000 x 1.500 x 2.400 mm - Peso: 6.500 kg

 ...

• mais informação

Control type: SELOGICA TOUCH Number of hours: 35,000 hours Closing force: 80 T Opening stroke: 500 mm Between columns: 470 x 470 mm Tray dimensions: 637 x 637 mm Mini/maxi mold: 250 mm Max distance between trays: 750 mm Injection: Screw diameter: 30 mm Screw length: 23.3/D cm3: 106 Bars: 2500 General: Motor power: 18.5 kW Heating power: 6.4 kW Closing weight: 3.5 Tons Injection weight: Dimensions length: 4 m Width dimensions: 1.3 m Dimensions height: 2 m Options: Cores: 1 Robot interface: YES Bi metal: YES