inna technika energetyczna używane na sprzedaż (2,908)

Sensor cable, connection cable, link cable, control cable, servo cable -Manufacturer: SAB Bröckskes, control cable servo cable -Type: AWM Style 21060 -Length: 15.45 m -Transport dimensions: Ø 500 x 90 mm -Weight: 7.5 kg

Sprzedajemy chłodzenie olejowe T10 AKG z obudową, wentylatorem i zewnętrzną pompą zębatą, nieużywany przedmiot, gotowy do natychmiastowego użycia Typ: 5210.104.X009, V=32l, 10 barów, rok: 2012 Wymiary obudów: W=1,28 m, W=94 cm, D=26 cm

Motor power: 45kW, max. volumetric flow rate: 140l/s at 8bar, max. operating pressure: 13bar. Documentation available. Inspection by appointment is possible.

Two identical ceiling evaporators are available, max. operating pressure: 28bar, max. operating temperature: 100°C, capacity: 29l, rated capacity at t=8°C: 18.9kW, rated capacity at t=7°C: 15.3kW, surface area: 101.9m², air flow rate: 11,240m³/h, air throw: 2x14m, inlet connection: 22mm, outlet connection: 54mm, defrost capacity (electric): 7,200W, length: 2,480mm, width: 1,565mm, height: 450mm, fan type: VT0139, fan diameter: 500mm, fan speed: 1,380/min, power per fan: 500W, current per fan: 1.05A, sound level: 78dB(A), number of fans: 2. An on-site inspection is possible, the units are not connected to power.

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 4 004 635 212.433 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/270/H145 mm -Weight: 20.1 kg

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R2003474 -Ultrasound sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 515/160/H115 mm -Weight: 18.9 kg

Transformator - Transformator napięciowy 3P 500V --> 3P 380V Producent prawdopodobnie Flasshoff & Klosterberg Typ 45500 Moc 45kVA Primaer 3x500 Wtyczka 3x380V + neutralny Hz 50-60 Izolowane IP44 Wymiary zewnętrzne przybliżone: Transformer 100 cm szerokości 80 cm wysokości 60 cm głębokości Waga około 400 kg Specjalna cena

A Nolting moving grate wood-fired boiler system is offered. Max. boiler output: 1125kW, nominal heat output: 900kW/1125kW, max. fuel moisture: W50/M30, optimum efficiency range: >90%, flue gas connection: DN250. Machine weight: approx. 4800kg. Inspection possible by arrangement.

Pressure sensor, pressure transmitter, pressure transducer -Condition: Original packaging very good -Manufacturer: WIKA, Pressure transmitter type Transmitter S-11 -Measuring range: 0-600 mbar -Input: 10-30 VDC -Output: 4-20 mA -Thread: 1 inch -Quantity: 1 sensor available -Price: per piece -Cardboard dimensions: 180/80/H60 mm -Weight: 0.4 kg

Standard radiators, car radiators, oil coolers, heat exchangers, compressor radiators, hydraulic oil coolers -Manufacturer: AKG, lightweight metal oil/air cooler with filter from Atlas Copco compressor type GA 408 Pack -Type: 1613 2726/653.92 -Pressure: max. 12 bar -Dimensions: 910/400/H700 mm -Weight: 49 kg

CNC control, operator panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control from CNC machining center Mikron VC500D -Type: LE 407 A 264 430 99 -Individual components: see photos -Dimensions: 475/325/H140 mm -Weight: 9.4 kg

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Interface module: 48-pin -Circuit board: Type P7127J 536/1 -Number: 3 modules available -Price: per piece -Dimensions: 150/70/H65 mm -Weight: 0.2 kg/pc.

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Indramat, AC servo controller from CNC machining center Mikron VC500D -Type: TDM 1.2-30-300-W0 -Number: 3x servo controllers available -Price: per piece -Dimensions: 325/390/H105 mm -Weight: 8.2 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Indramat, AC servo power supply from CNC machining center Mikron VC500D -Type: KDV1-3-100-220/300-W1 -Quantity: 1x Power Supply available -Dimensions: 485/390/H105 mm -Weight: 20.9 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control unit, converter, controller, servo line former, drive control unit, AC mainspindle drive, spindle controller -Manufacturer: Indramat. AC mainspindle drive from a Mikron VC500D CNC machining center -Type: KDA 3.2-100-3-AP0-W1 -Art.: 776781-001 112 792 -Dimensions: 485/390/H150 mm -Weight: 17.8 kg

An oil-lubricated, variable-speed Almig screw compressor is offered. Motor power: 22kW, volume flow: 760-3910l/min, max. operating pressure: 13bar, max. motor speed: 6400rpm, operating hours: approx. 24702. Documentation available. Inspection possible by arrangement.

High-temperature heat pump for industrial processes using water as the heat transfer fluid. The system consists of the following main components: Evaporator: Heat exchanger for evaporating R245fa refrigerant. The heat required for this is absorbed by water. Compressor: A screw compressor that is continuously adjustable between 50% and 100% of maximum capacity. Condenser: A heat exchanger for transferring heat from the compressed refrigerant to heating water. The refrigerant is liquefied again during this process. The liquid refrigerant is expanded via an expansion valve and returned to the evaporator., Additional title: high-temperature water-to-water industrial heat pump, Heating capacity: 408 kW, Cooling capacity: 319 kW, Coefficient of Performance: 4,6, Power: 89 kW, Current: 159 A, Voltage: 400 V, Frequency: 50 Hz, Length: 4380 mm, Width: 1390 mm, Height: 1800 mm, Weight: 2600 kg, Fe ...

Control cabinet, distribution cabinet, switch cabinet, baying cabinet, server cabinet, electrical cabinet -Manufacturer: Ecoair, control cabinet test field on mobile base -Type: 10 outlets -Switching capacity: Outputs 1-5 max. 11 kVA / Outputs 6-10 max. 7 kVA -Features: see photos -Dimensions: 2075/1000/H2150 mm -Weight: 373 kg

Service reset tool, electronic diagnostic and reset device -Manufacturer: Vestatec, Service Reset -Type: VSR-V -Item No.: 600004 -Case dimensions: 320/275/H60 mm -Weight: 0.7 kg

Sole cleaning machine, shoe cleaning machine -Manufacturer: Today, sole cleaning machine, shoe cleaning machine -Type: Solamat 100 -Power supply: 230 volts -4 roller brushes: for the soles (nylon) -2 round brushes: (nylon) for the side edges -1 Upper leather brush: (horsehair) -Dimensions: 560/460/H1090 mm -Weight: 59 kg

Rated voltage: 12 kV, length: 4430 mm, height: 1700 mm, including documentation. An on-site inspection is possible.

PLC controller, electronic module, PLC control, control module -Manufacturer: Klöckner-Moeller, Programmable Control -Type: PS3 -Quantity: 1 module available -Dimensions: 215/105/H135 mm -Weight: 2.6 kg

Oferowane są dwie sprężarki chłodnicze DWM Copeland. Jest używany warunek. W zależności od wieku wokół widać ślady zużycia i rdzy (patrz zdjęcia). Służyły jako urządzenia zamienne dla zamrażarki spiralnej. VAT można wykazać. Dane techniczne: Producent: DWM Copeland Model: D8SJ1-600X-BWM/D Rok produkcji: 2008 Napięcie: 380 V 3fazowe Częstotliwość: 50 Hz Obecnie: 107 A Prędkość: 1450 1/min Przepływ objętościowy: 180 m³/h Zobacz tabliczkę z nazwiskiem. Sprzedaż tylko rzemieślnikom. Jeśli masz jakiekolwiek pytania, śmiało skontaktuj się z nami. Urządzenie można przetestować na miejscu. Możesz również złożyć uczciwą ofertę. Kompresory chłodnicze są sprzedawane z wyłączeniem odpowiedzialności za wady materiałowe. Nie ma zwrotów, gwarancji, wymian ani gwarancji. Wszystkie informacje bez gwarancji.

A stationary oil lubricated, belt driven reciprocating compressor from Mark with an air receiver is offered. Motor power: 7.5kW (10hp), intake capacity: 1300l/min, max. operating pressure: 10bar, air receiver volume: 500l, compressed air connection: G 1/2. Dimensions X/Y/Z: approx. 1910mm/600mm/1230mm, weight: approx. 330kg. Inspection possible by prior arrangement.

Safety relay, safety control, overrun relay, flow monitor, contactor, relay, current monitor -Manufacturer: Telemecanique, Power Monitor Ovp -Type: RM4JA31M -Cardboard dimensions: 90/80/H25 mm -Weight: 0.1 kg

Zbiornik rozprężny z refleksem membrany Variomat VF o pojemności 3 000 l MAG od 2017 roku o pojemności 3 000 l, Dostępne są trzy, cena to sztuka za sztukę. Producent: reflex Model: Variomat VF Typ: Zbiornik rozprężny ciśnienia membrany Numer seryjny: 18T02235003 Tom [l]: 3 000 Temperatura pracy [°C]: -10 / 70 dozwolone. Temperatura VL [°C]: 120 dozwolone. Ciśnienie robocze [bar]: 6 Ciśnienie testowe [bar]: 9,5

Oferowana jest obrotowa sprężarka śrubowa Kaeser z wbudowaną suszarką chłodniczą. Moc: 7,5kW, maksymalne ciśnienie robocze: 7,5bar, suszarka chłodnicza: TU11, czynnik chłodniczy: R134a, ładunek czynnika chłodniczego: 0,490kg. Wymiary X/Y/Z: ok. 680mm/780mm/1300mm, waga: ok. 270kg. Inspekcja po wcześniejszym umówieniu jest możliwa.

The following are offered: 3x Kaeser compressors, 1x Gieb compressor, 1x Atlas Copco compressor and 1x Maschinen- und Behälterbau pressure vessel. 1) Gieb compressor, 750/250-11, year of manufacture: 2005, max. operating pressure: 11bar, intake capacity: 750l/min, power requirement: 4.0kW. 2) 3x Kaeser EPC 630-150 compressors, year of manufacture: 1995, max. operating pressure: 10bar, displacement: 630l/min, motor power: 3.0kW. 3) Atlas Copco LT compressor with sound enclosure, operating pressure: 15bar. 6) Maschinen- und Behälterbau pressure vessel, volume: 350l, year of manufacture: 1997, max. operating pressure: 16bar, temperature range: -10°C to +50°C. An on-site inspection is possible.

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: Kieback & Peter, temperature sensor type DN454I, unused -Item No.: 181300 -Screw-in depth: 425 mm -Quantity: 1x temperature sensor present -Dimensions: Ø 140 x 510 mm -Weight: 1.5 kg

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: Kieback & Peter, temperature sensor type DN444SI, unused -Item No.: 326737 -Screw-in depth: 425 mm -Quantity: 1x temperature sensor present -Dimensions: Ø 140 x 510 mm -Weight: 1.5 kg