Giętarki do rur LANG EL-HY168F CNC

maszyny do obróbki metalu / obróbka blach / Giętarki do rur

Producent: LANG

Model:EL-HY168F CNC

Typ maszyny: Giętarki do rur

Numer pozycji: 167413946

Ilość: 1

Data: 24.07.2025

Rok produkcji: 1994

Lokalizacja: Eilenburg

Cena:


Maszyna w magazynie:Tak

Seller-item-No.:2084-1062

tube diameter: 168,3 x 11 mm
tube: 6000 mm
bending radius max.: 700 mm
Control: Siemens 840 D
bending radius min.: 80 mm
bending angle max. +/-: 190 °
connected load: 400 V / 50 HZ /85A
Dimensions (L/W/H): 11,9 x 2,7 x 2,45 m
weight of the machine ca.: 33 t
- CNC control system MMI Multicontrol 2000
- NCU control system Siemens 840D
- SPS PLC Siemens Simatic S7
- electr. connected load 400V / 50 Hz / 85 A

The machine is fully automatic and equipped with a tool changer.

The following tools are available:

Pipe Ø 48.3 mm, Radius 105 mm
Pipe Ø 60.3 mm, Radius 120 mm
Pipe Ø 63.5 mm, Radius 150 mm
Pipe Ø 76.1 mm, Radius 190 mm
Pipe Ø 88.9 mm, Radius 222 mm
Pipe Ø 114.3 mm, Radius 285 mm
Pipe Ø 139.7 mm, Radius 350 mm
Pipe Ø 141.3 mm, Radius 700 mm
Pipe Ø 168.3 mm, Radius 420 mm

There were a few mandrels that had a marking engraved directly on them.

These had the following specifications:

88.9 x 8 mm, 88.9 x 4.5 mm, 114.3 x 8.8 mm, 139.7 x 8.8 Z5728996 mm,
168.3 x 12.5 mm, 168.3 x 8.8 mm

The following outer diameters of the mandrels were measured:

23.2 mm, 32.3 mm, 37.1 mm, 41.5 mm, 59.3 mm, 70.3 mm,
77.7 mm, 80.9 mm, 88.7 mm, 93.2 mm, 94.7 mm, 103.0 mm,
112.8 mm, 118.8 mm, 128.9 mm, 138.5 mm, 147.2 mm, 153.6 mm

The accessory package has a value of around €150,000



The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Udostępnij tę maszynę na Facebook:

Zapytanie ofertowe

Handlowiec maszyn?

Proszę wybrać opcjonalnie

Wyślij zapytanie?

kopia do ciebie?

Save input data

tube diameter: 168,3 x 11 mm
tube: 6000 mm
bending radius max.: 700 mm
Control: Siemens 840 D
bending radius min.: 80 mm
bending angle max. +/-: 190 °
connected load: 400 V / 50 HZ /85A
Dimensions (L/W/H): 11,9 x 2,7 x 2,45 m
weight of the machine ca.: 33 t
- CNC control system MMI Multicontrol 2000
- NCU control system Siemens 840D
- SPS PLC Siemens Simatic S7
- electr. connected load 400V / 50 Hz / 85 A

The machine is fully automatic and equipped with a tool changer.

The following tools are available:

Pipe Ø 48.3 mm, Radius 105 mm
Pipe Ø 60.3 mm, Radius 120 mm
Pipe Ø 63.5 mm, Radius 150 mm
Pipe Ø 76.1 mm, Radius 190 mm
Pipe Ø 88.9 mm, Radius 222 mm
Pipe Ø 114.3 mm, Radius 285 mm
Pipe Ø 139.7 mm, Radius 350 mm
Pipe Ø 141.3 mm, Radius 700 mm
Pipe Ø 168.3 mm, Radius 420 mm

There were a few mandrels that had a marking engraved directly on them.

These had the following specifications:

88.9 x 8 mm, 88.9 x 4.5 mm, 114.3 x 8.8 mm, 139.7 x 8.8 Z5728996 mm,
168.3 x 12.5 Z5728996 mm, 168.3 x 8.8 mm

The following outer diameters of the mandrels were measured:

23.2 mm, 32.3 mm, 37.1 mm, 41.5 mm, 59.3 mm, 70.3 mm,
77.7 mm, 80.9 mm, 88.7 mm, 93.2 mm, 94.7 mm, 103.0 mm,
112.8 mm, 118.8 mm, 128.9 mm, 138.5 mm, 147.2 mm, 153.6 mm

The accessory package has a value of around €150,000



The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

seller offer No. resale 2084-1062
Udostępnij tę maszynę na Facebook:
TOP
Seller
zatwierdzony
sprzedawca

Sprzedawca

logo dealer

ZOMA Maschinenhandel

Pan Gerd Zogbaum
04838 Eilenburg
Germany

RESALE członek od 2008

  • lista maszyn (217)

Zapytanie ofertowe

Handlowiec maszyn?

Proszę wybrać opcjonalnie

Wyślij zapytanie?

(wszystkich sprzedawcami takiej maszynie)

kopia do ciebie?

(kopia twojego zapytania zostanie wysłany na adres e-mail)

Save input data

(Save input data for further inquiries)

więcej LANG EL-HY168F CNC + similar LANG-Model

2002 LANG120 CNC
LANGEL-HY 168 F CNC