Producent:
(Kategoria: 102)
turning diameter: 376 mmturning length: 760 mmcontrol: FANUC I-Series Plus greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 4000 U/minspindle drive motor: 22 / 15 kWspindle nose: ASA A2-8 spindle bore: 81 mmbar material dia.: 76 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 12 St.travel -x axis: 260 (72 + 188 ) mmtravel -z axis: 830 mmtravel -y axis: 105 (+/- 52,5) mmdiameter of quill: 100 mmquill stroke: 100 mmtailstock taper MT: MT 5 total power requirement: 41,98 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 4,0 x 2,5 x 2,2 mCNC control FFANUC I-Series Plus- chip conveyor- driventools 5000U/min, 7,5kW- C-axis- hydraulic unit- tailstock- coolant 7 bar- bar loader interfaceCapto C3 straight chair: 2Capto C3 90° chair: 1ER20 Capto chuck: 10ER32 Capto chuck: 4Weldon-to-Capt ...
turning diameter over bed: 3750 mmturning diameter over slide rest: 3250 mmturning length: 15000 mmcentre distance: 15000 mmfaceplate: 3000 mmworkpiece weight: 120 tsteady: + 15t Rest: 2 main drive: 119 kWspindle bore: 105 mmspindle turning speed range: 0,33 - 75 U/minfeed in x - axis: 300 mm/minfeed in y - axis: 150 mm/mintailstock quill diameter: 500 mmtotal power requirement: ca 140 kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 2-Carriages- Face Plate 3000mm- 6-Steady Rests- 4-Way Bed Construction- Taper Attachment- Inch/Metric Threading- Tailstock With Live CenterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 2,25/3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Średnica toczenia: 550 mm, długość toczenia: 1500 mm, sterowanie: Fagor 8055, oś x: 108 mmz, oś: 3000 mm, całkowite zapotrzebowanie mocy: kWweight maszyny, ca: wymiary maszyny: m: dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
control: Fanuc - - -: - - - - - -- - -: - - - - - -Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant systemThe machine is in a well-maintained condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL4 | VL-4The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Fanuc - - -: - - - - - -- - -: - - - - - -Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant systemThe machine is in a well-maintained condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL4 | VL-4The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Średnica toczenia: 400 mmDługość toczenia: 1000 mm Średnica wahania nad ślizgiem: 400 mm Średnica toczenia nad suwakiem: 225 mm szerokość łożyska: 433 mm Średnica wrzecienia: 56 mm Całkowite zapotrzebowanie mocy: 7,4 kW masy maszyny ok: 2,5 x 0,9 x 1,3 m Dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
turning diameter: 500 mmturning length: 1000 mmcontrol: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mmspindle bore: 70 mmspindle turning speed range: 3 - 2800 U/minspindle power: 15 kWmax. torque on the spindle: 1530 Nmspindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 Nrapid travel - longitudinal/face: 10 / 5 m/minbed width: 360 mmtravel of cross-slide: 265 mmupper slide travel: 140 mmturning tool - shaft cross cut: 32 x 25 mmtailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock taper MT: 5 total power requirement: kWweight of the machine ca.: 3,1 tAccessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 400 mmturning length: 230 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc controlat each spindle is a 3-jaw chuck mounted2x 12-fold revolverchip conveyorcoolant deviceTechnische Daten: / technical detailsSchwingdurchmesser / rotary diameter 500 mmmax. Drehdurchmesser / max. turning diameter 400 mmmax. Drehlänge / max. turning length 230 mmX-Weg / X-travel 220 mmZ-Weg / Z-travel 230 mmmax. Drehzahl der Spindeln / max. spindle speed of the spindles 2000 UpM /rpmAnzahl der Revolverplätze / number of tool places 2x 12 Eilgang x, z / rapid feed x, z 30, 30 m/minAntriebsleistung Spindeln / drive capacity spindles 18,5/15 kWGewicht ca. / weight ca. 9400 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, acces ...
Średnica toczenia: 5-42 mm, długość toczenia: 3200 mm, sterowanie: Traub TX8i oś x: 50 mmz, oś: 50 mm, całkowite zapotrzebowanie mocy: kWweight maszyny: ok: 4000 kgwymiary maszyny: m: dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
Średnica toczenia: 1,320 mm Długość toczenia: 5000 mm Średnica wahania: 1250 mm Waga elementu: 14 Średnica obrotowa nad ślizgiem: 900 - 950 mm Całkowite zapotrzebowanie mocy: 45 kWweight maszyny: ok.: 18 t Dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
Średnica toczenia nad stołem: 340 mm Średnica obrotu nad podpórką suwaka: 177 mm Długość toczenia: 630 mm prędkość obrotowa wrzeciona - bezstopniowa: 55-3000 U/minweight maszyny, ok.: 1,55 wymiarów maszyny: 2 x 1 x 1,6 mCyfrowy odczyt HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch Dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
Średnica toczenia: 600 mm, długość toczenia: 1250 mm, sterowanie: Siemens 840D przesuw suwaka radialnego: 320 mm, zakres prędkości obrotowej: 5-3.000 U/min: liczba narzędzi: 8 St.steady: urządzenie chłodzące z przenośnikiem wiórowym: całkowite zapotrzebowanie mocy: 42 kvaweight maszyny: ok.: 5,5 tages maszyny: 3,6x2,15x1,95 m. Dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
turning diameter: 400 mmturning length: 635 mmcontrol: Heidenhain Eltropilot greates pass round over bed: 570 mmtravel -x axis: 220 mmtravel -z axis: 635 mmmain spindle bore: 79 mmdrive of main spindle: 21 kWmax. torque on the spindle: 240 Nmmain spindle speeds:: 25-5.000 turning speed range - C-axis: 100 U/minworkpiece system 12-station turret head: feed power in the axis x + z: 3,5 / 7 Nrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/mincoolant device with chip conveyor: total power requirement: 44 kvaweight of the machine ca.: 6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 4.000 mmtravel -x axis: 4.500 mmtravel -z axis: 600 mmcontrol: Siemens Sinumerik 840D-sl feed range: 0 - 8.000 mm/minturning speeds: 1) 0,7 - 5,6 U/minturning speeds: 2) 2,8 - 22,4 U/minturning speeds: 2,1 - 56 U/mintool taper: Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery:- Chip conveyor- Hydraulic unitThe ZERBST - DP05/W08 has been retrofitted in 2010.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DP05W08 | DP05 W08 | DP05-W08The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 815 mmturning length: 3000 mmcontrol: ECS 2402 swing over bed: 815 mmcentre distance: 3000 mmswing diameter over slide rest: 485 mmspindle bore: 137 mmspindle turning speed range: 1200 U/minrapid traverse: 5 m/minspindle motor: 28 kWtailstock quill diameter: 115 mmtailstock quill stroke: 250 mmtotal power requirement: 30 kWweight of the machine ca.: 7,0 tdimensions of the machine ca.: 5,87 x 2,10 x 2,10 mEquipment: CNC-control E.C.S. 2402 3-jaw chuck 4-jaw faceplate, diameter 700 mm 4-jaw faceplate, diameter 400 mm 3 Steady rests Chip ConveyorWithout boring bar holder and boring bar.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Średnica toczenia: 330 mm Długość obrotowa: 650 mm Prędkość obrotowa wrzeciona - bezstopniowa: 30-5000 Zwężanie U/minspindle: ASA Sterowanie A2-5: FANUC 18i-T Dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
greates pass round over bed: 670 mmswing diameter over bed slide: 490 mmmax. turning diameter: 490 mmcontrol: SIEMENS - 840 D main spindle bore: 115 mmexternal spindle dia. in forward position: 160 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,- 3 jaw chuck,A machine video from the production plant will be shared on request.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 340 mmturning length: 575 mmswing dia.: 500 mmX-Axis movement: 215 mmY-Axis movement: 100 mmZ-Axis movement: 605 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 4500 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: Mazatrol Smooth G Main Spindle:: Spindle Speed: 5000 1/minspindle motor: 15/11 kWspindle bore diameter: 76 mmbar capacity: 65 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 7,5 kWspindle bore: 53 mmspindle distance: 575 mmtotal power requirement: 26,9 kVAWeight: 4,8 tdimensions of the machine ca.: 2,7 x 1,7 x 1,75 m- Mazatrol SmoothG CNC control- Main and counter spindle- 12-station tool turret with driven tools and Y-axis-- Turning Speed: 4500 U/min, 5,5kW- 3-jaw chuck-- Main: 8-- Counter: 6- Chip conveyor- Coolant system- ...
turning diameter over bed: 297 mmturning diameter over bed slide: 160 turning length: 500 mmshort taper holder: Größe 5 spindle bore: 36 mmspindle turning speed range: 30-3550 U/minnumber of speeds: 18 quill adjustment: 90 mmtailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mmtotal power requirement: kWweight of the machine ca.: 610 kgdimensions of the machine ca.: 1,4 x 0,7 x 1,2 mwedge bar chuck Forkardt: Ø 160 mmAccessories:Forkardt V-block chuck, Ø 160 mmCollet chuck,Collets,Steel Multifix system, size Awith 3 quick-change insertsIntegrated center pointChip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Wysokość środka: 450 mmOdległość środkowa: 6150 mmŚrednica średnicy obrotu nad warstwą: 900 mm Średnica toczenia nad ślizgiem: 660 mm Napęd wrzeciona: 15 kW Wymiary zewnętrzne: Breite 1750 mm Długość: 9000 mmWysokość: 1650 mm Prędkość wrzeciona: 11-500 UpM Z uchwytem, kołdrem i płytą czołową Dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
bar material dia.: 32/38 mmspindle passage: 44 mmturning length: 320 mmturning speeds: 200-8000 U/minc-axis: 0,001 Gradgripping station: 32/38 mmturning length: 120 mmturning speeds: 200-8000 U/minc-axis: 0,001 0number of tools: 13 fixnumber of milling stations: 4+5 drivencontrol: Mitsubishi Meldas M70 Number of axles: 5+2 St.total power requirement: 7,5 kWweight of the machine ca.: 2850 kgdimensions of the machine ca.: 2,5 x 1,4 x 1,75 + FMB mbar loader: FMB turbo 3-36 fire distinguisher: Kraft & Bauer CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloaderFMB turbo 3-36equipped with swarf & coolant tank, fire distiguisher.ON/OFF 29.564h (status 24.03.2026)Running hours 26.607h (status 24.03.2026)GBL function (standard)LFV function: noThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
średnica toczenia: 340 mm, długość toczenia: 1000 mm, sterowanie: Mazatrol SmoothC całkowite zapotrzebowanie mocy: kWweight maszyny, ok.: wymiary maszyny, ok.: mDane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
turning diameter: 350 mmturning length: 650 mmcontrol: 840 D SL ShopTurn Siemensgreates pass round over bed: 385 mmSwing dia. over traverse guideway: 350 mmMain spindle:: turning speed range - main spindle: 0 - 4.500 min/-1power capacity - main spindel: 11,5 / 8 kWmax. Torque: 340 Nmspindle diameter in front bearing: 130 mmspindle bore: 87 mmbar material dia.: max. 65 mmmax. chucking diameter: 250 mmspindle head: 170 h5 C-Axis: turret:: number of toolpositions: 12 pos.Shank diameter: DIN 69880: 30 mmDriven Tool Stations:: Number of driven toolspositions: 6 pos.Spindle speed - driven tool stations: max. 4.500 min -1power capacity driven tool-stations: 5,5 kWaxis stroke:: x-axis: 255 mmz-axis: 800 mmTailstock:: tailstock: 680 mmtaper of center: MK 4 clamping capacity: 6,8 kNfeeds:: feed speeds: 0 - 30.000 mm/minrapid traverse ( X / Y / Z ): 30 / - / 30 m/minFeed force ( X / Y / Z ): ...
Średnica płyty czołowej: 4500 mm, średnica obrotowa: 5000 mm, wysokość toczenia: 2500 mm, maksymalna masa elementu: 63 tno. Z suwaków: 2 maks. skok naciągu: 1600 mm, zakres prędkości toczenia płyty czołowej: 0,3 - 32 U/minAnzahl der Drehzahlstufen: 4 całkowite zapotrzebowanie mocy: 130 kWweight maszyny: ok.: 145 wymiarów maszyny ca.: 6,6 x 11,4 x 8,4 m- DRO- 2 obrotowe Ramy (-15 / +40) Dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
turning diameter over bed: 1090 mmturning diameter over slide rest: 700 mmturning length: 6000 mmcentre distance: 6000 mmspindle bore: - mmspindle taper: - turning speed range: U/minpower requirement: 30 kW3-jaw-chuck diameter: mmquick change toolholder: 4 fach Stahlhalter taper in tailstock-quill: MK 6 dia. of quill: 125 mmquill stroke: 260 mmtotal power requirement: 30 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 8,2 x 1,8 x 1,82 m- rapid traverse- tail stock- DROThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
greates pass round over bed: 350 mmswing diameter over face slide: 200 mmcentre distance: 800 mmcentre height: 175 mmturning length: 700 mm3-jaw chuck: Röhm Ø 160 spindle bore: 46 mmspindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/mintailstock quill taper MT: 3 weight of the machine ca.: 1000 kg3-axis digital readoutmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0554 mm: 370 mm: 3000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
7.000 € 
