Producent:
(Kategoria: 845)
Manufacturer: TICAB Year of Manufacture: 2025 Machine Type : Printing System TPS This is a professional full-color direct printing machine designed for high-volume packaging, labeling and production line environments. Prints directly onto assembled and flat cardboard boxes, paper, wood, plywood and textile without the need for plates, cliches or any pre-press preparation. The system uses Hewlett Packard HP pigment ink technology, delivering prints that are resistant to fading, scratching and water once dry. Machine Specifications - Print area width: up to 29.7 cm (11.7 inches) - Print area length: from 2.54 cm (1 inch) to 91.44 cm (36 inches) - Print resolution: 1200 x 1200 dpi - Print speed: up to 50 units per minute (A4), up to 16 per minute (A3) - Workpiece movement speed: up to 45.72 cm (18 inches) per second - Color system: CMYK - Cyan, Magenta, Yellow, Black - Ink type: water ...
Manufacturer: Comiflex Model: Vale 1208 Year of Manufacture: 2011 Machine Type : 8-Colour Gearless Flexographic Printing Machine Number of colours: 8 Condition: Immaculate, manufacturer-serviced only, full service history available Print Specifications - Material width: 1280 mm - Print width: 1200 mm - Minimum repeat length: 380 mm - Maximum repeat length: 840 mm - Machine speed: 300 m/min Anilox Rolls (8 included) - Face length: 1260 mm - Engrave length: 1240 mm - Outside diameter (OD): 171.88 mm - Inside diameter (ID): 149.722 mm Sleeves (8 included) - Inside diameter (ID): 114.708 mm - Face length: 1210 mm Ink and Registration Systems - Ink pump: Phonematic with autowash system - Camera and registration system: FIFE Find more here - / Contact us at -
Manufacturer: Carint Year of Manufacture: 2000 Machine Type : 6-Colour Central Impression Flexo Printing Machine Print Specifications - Substrates: PE, PP, OPP, PET, Paper - Printing width: 1250 mm - Material width: 1280 mm - Minimum print repeat: 360 mm - Maximum print repeat: 1040 mm - Mechanical speed: up to 300 m/min Unwinder and Winder - Unwinder type: Turret, non-stop - Maximum roll diameter: 800 mm - Shaft size: 3 inch expanding shafts - Winder type: Turret, non-stop - Maximum roll diameter: 800 mm - Shaft size: 3 inch expanding shafts Ink and Drying System - Ink pumps: 6 pneumatic pumps - Doctor blade system: chamber type doctor blades - Drying system: electrical Accessories and Equipment Included - Motorised longitudinal register - Anilox cylinders: 8 pieces - Cliche holder cylinders: 6 pieces - Video inspection system - Web guides - Banana rolls - Cliche holder hois ...
Manufacturer: HCI Year of Manufacture: 2010 Machine Type : Slitter Rewinder Condition: Excellent working condition, currently in production Material and Cutting Specifications - Materials: LDPE, LLDPE, BOPP - Cutting type: Razor - Number of cutting knives: 12 - Slitting width range: 50 mm to 1100 mm - Maximum operating speed: 300 m/min - Core sizes: 3 inch and 6 inch Unwinder - Type: Hydraulic / pneumatic shaftless - Maximum roll diameter: 800 mm - Maximum roll width: 1100 mm - Maximum roll weight: 120 kg Winder - Type: Shaft - Maximum winding width: 1100 mm - Maximum roll diameter: 500 mm Find more here - / Contact us at -
Manufacturer: Raulimex Year of Manufacture: 2009 Machine Type : Slitter Rewinder Condition: Excellent working condition, currently in production Material and Cutting Specifications - Materials: LDPE, LLDPE, BOPP - Cutting type: Razor - Number of cutting knives: 8 - Slitting width range: 50 mm to 1000 mm - Maximum operating speed: 300 m/min - Core sizes: 3 inch and 6 inch Unwinder - Type: Hydraulic / pneumatic shaftless - Maximum roll diameter: 800 mm - Maximum roll width: 1000 mm - Maximum roll weight: 120 kg Winder - Type: Shaft - Maximum winding width: 1100 mm - Maximum roll diameter: 500 mm Find more here - / Contact us at -
Manufacturer: Raulimex Year of Manufacture: 2015 Machine Type : Slitter Rewinder Condition: Excellent working condition, currently in production Material and Cutting Specifications - Materials: LDPE, LLDPE, BOPP - Cutting type: Razor - Number of cutting knives: 8 - Slitting width range: 50 mm to 1300 mm - Maximum operating speed: 350 m/min - Core sizes: 3 inch and 6 inch Unwinder - Type: Hydraulic / pneumatic shaftless - Maximum roll diameter: 800 mm - Maximum roll width: 1300 mm - Maximum roll weight: 120 kg Winder - Type: Shaft - Maximum winding width: 1300 mm - Maximum roll diameter: 500 mm Find more here - / Contact us at -
Manufacturer: Epson Model: SureColor SC-F6300 Print Specifications - Print technology: On-demand inkjet, PrecisionCore TFP printhead - Maximum print width: 1100 mm (44 inches) - Maximum print resolution: 720 x 1440 dpi - Ink type: Epson UltraChrome DS dye sublimation inks - Ink colours: CMYK (Black, Cyan, Magenta, Yellow) - Ink capacity: 1500 ml per colour - Minimum ink droplet size: 4 picolitre with variable droplet technology - Nozzle configuration: 360 nozzles x 2 rows x 4 colours Connectivity - USB: Hi-Speed USB 2.0 - Network: Ethernet 1000Base-T / 100Base-TX / 10Base-T Find more here - / Contact us at -
Manufacturer: HP Model: Latex 570 Technical Specifications - Print width: up to 64 inches (1,630 mm) - Media width range: 10 to 64 inches (roll feed) - Print resolution: native 1200 x 1200 dpi - Print technology: HP Latex water-based ink - Ink system: 7 colours - black, cyan, magenta, yellow, light cyan, light magenta, HP Latex Optimizer - Ink cartridge size: 3-litre HP 871 Latex cartridges (hot-swappable during printing) - Print heads: 7 (user-replaceable, with automatic nozzle compensation) - Maximum print speed: up to 91 m2/hr (draft mode) - Indoor quality speed: 23 m2/hr - Outdoor high-speed (4-pass): approximately 31 m2/hr - Maximum roll weight: 55 kg (121 lb) - Colour accuracy: delta E2000 less than or equal to 2 for tiling applications - Length accuracy: +/- 1 mm/m - Connectivity: Gigabit Ethernet, HP Latex Mobile app (remote monitoring) - Condition: used, second-hand Find mor ...
Offset printing machine Type: RAPIDA 75-4 SAPC Manufacturer: KBA Year: 2014 Imprints: 60,000,000 Maximum with format: 605 × 750 mm / minimum 330 × 330 mm Print format: max. 580 × 735 mm / min. 310 × 315 mm. Thickness of printed surface: 0.05 – 0.8 mm. Maximum speed: 15,000 sheets/hour Semi-automatic creation of printing Washing of the offset cover and the color book. Machine in good condition, fully functional Find more here - / Contact us at -
Manufacturer: Bauerle Model: Multimaster CAS 52 Machine Type : Folding Machine Technical Specifications - Sheet size maximum: 52 x 85 cm - Sheet size minimum: 10 x 12 cm - Fold length maximum: 46.5 cm - Fold length minimum: 3.5 cm / 1.8 cm - Paper weight: 40 to 250 g/m2 - Speed: 200 metres per minute (material dependent) - Power supply: 3 x 400 V / 50 Hz / N / PE - Fold pockets per fold unit: 4 - Fold units: expandable up to 3 - Standard fold types stored: 7 - Job memory: 60 repeat jobs Find more here - / Contact us at -
Manufacturer: GEW Model: E2C Machine Type : UV Curing System Technical Specifications - Power output: 140 W/cm - Number of lamp housings: 9 - HMI control stations: 10 - Maximum lamp life: 2500 hours per lamp - Cooling: fully air-cooled, no water installation required - Condition: as new Find more here - / Contact us at -
Offset rotary printing machine Type: Lithoman IV Manufacturer: MAN Roland Year: 1999 Impressions: 42500 Cylinder circumference: 1240 mm Maximum paper width: 965 mm Maximum operating speed: 42,500 cylinder revolutions/hour Machine in good condition, fully functional, under power Find more here - / Contact us at -
Digital color printing system Type: Xeikon 3300 Manufacturer: Xeikon Year: 2013 X 5 colors CMYK+W Second fuser unit alpine for embrossed labels In good condition, fully functional Find more here - / Contact us at -
Letterpress Type: HK 250 Manufacturer: Hikari Unwind x 6 UV leterpres print unit, Ist UV dryer Punch air unir Flat diecut unir Slittinfg unit x2 rewind unir (revolver) Label counter Machine in good condition, fully funcrional Find more here - / Contact us at -
Offset rotary printing machine Type: Lithoman III Manufacturer: MAN Roland Year: 2006 Impressions: 60000 Machine in good condition, fully functional, under power Find more here - / Contact us at -
HPI 7800-1 Name 2014-08 Year/ Installation 246.227.667 Impressions Find more here - / Contact us at -
Manufacturer: SEAL Model: 80 Pro D Technical Specifications - Maximum processing width: 2,030 mm - Maximum speed: 6 m/min - Maximum material thickness: 38 mm - Maximum roller pressure: 2.5 N/mm - Maximum roller temperature: 140 degrees C - Roller heating: both sides (top and bottom) Machine Dimensions - Width: 2,667 mm - Height: 1,654 mm - Depth: 634 mm - Net weight: 780 kg Transport Dimensions - Width: 2,710 mm - Height: 1,690 mm - Depth: 900 mm - Transport weight: 840 kg Electrical Data - Power supply: 3N/PE 230 VAC +/- 10%, 50/60 Hz, 25A Key Features - Variable temperature, speed and pressure settings - Ergonomic touchscreen control panel on swivel arm (operable from front and rear) - Feed table with tension rollers and fold-down print guide for smooth and even media feed - Longitudinal cutting device for trimming finished products during processing - Foldable pull rollers ...
Manufacturer: SAKURAI Model: Oliver 466 SDP Year of Manufacture: 2014 Type of Machine : 4-Color Sheet-Fed Offset Printing Machine Maximum Paper Size: 26x20 inches (660x508 mm) Counter: 34.4 million impressions Specifications: - Maximum Speed: - 16,100 sheets/hour - 15,000 sheets/hour in perfecting mode - Paper Thickness Range: - 0.0016–0.016 inches (0.04–0.4 mm) Features: - CIP 3 Connection: Integrated with x-rite densitometer for accurate and efficient color calibration and workflow integration. - SCC II Color Control Console: Advanced color control system for consistent and high-quality output. - Automatic Roller Washing System: Ensures quick and efficient cleaning of rollers for reduced downtime. - SPC Plate Changer: Streamlined plate-changing mechanism for enhanced productivity. - SAS (Sakurai Auto Set): Fully automated format setting for: - Attachment - Delivery - Page ...
Box and Bag Printing Machine – BM300 Perfect for printing on paper bags and cardboard. Introducing the BM 300, an easy-to-use and highly versatile digital solution for Direct-to- Packaging printing. With a small investment, it opens up opportunities in the ever-growing market of customizing boxes, shipping envelopes, paper bags, and jute in small and medium runs. This latest addition is a natural evolution based on sales successes and customer feedback, resulting in a more effective and smooth workflow management system. The BM 300 incredible versatility comes from its combination of an ultra-fast HP Technology print engine with water-based, solvent-free, and odorless pigmented inks. It can print on both treated and untreated paper and cardboard substrates, as well as directly on packaging up to 15 cm thick. With the BM 300 Software, you can accurately adjust the printhead ...
Equipment em260 year of manufacture 2001 total - 4 Mio m A 2001 Gallus EM 260 is a narrow-web, modular flexographic printing press designed primarily for label production and packaging. Often branded under the Gallus Arsoma line during that era, these machines are known for their robust construction and ability to handle various substrates, including paper and film. Retrofit of the entire machine control system in 2016 8 x printing units with dual drive, max. printing width 250 mm 3 x punching stations (2 x with adjustable counterpunch cylinders (Spilker Variabase)) Printing cylinders 8x each (1/8"): z=88, z=92, z=96, z=100, z=108, z=116, z=120, z=124, z=132 Additional counterpressure cylinders for thin and thick materials Magnetic cylinders, min. 3x each (various gap dimensions, 1/8"): z=88, z=92, z=96, z=100, z=108, z=116, z=120, z=124, z=132 46 x anilox rollers for all appl ...
em510 , built in 2007 3 x printing units with dual drive, max. printing width 510 mm 3 x punching station (2 x with adjustable counter-punching cylinders (Spilker Variabase)) Cliché cylinders (1/8"): 3 x 88, 3 x 92, 3 x 96, 3 x 100, 3 x 108, 3 x 116, 3 x 120, 3 x 140 Magnetic cylinders (1/8"): 2 x 96, 3 x 100, 3 x 108, 3 x 116, 3 x 120, 4 x 140, 3 x 176, 3 x 184, 2 x 192, 1 x 222 13 anilox rollers (cm3): 4.1; 5.04; 6; 6; 6.3; 6.09; 8; 8.25; 9.58; 13; 13.51; 16.57; 30 2 x new anilox rollers 3 x sleeve holders z=88 for coating (with assembly station) Screen printing unit Laminating station 2 x grid winders on rails (up and down) 3 x Uviterno UV system (240 W/cm) 2 x NIR drying modules for aqueous systems (Lambda technology) Corona system 2Kw (SIT) Web edge control: E&L (2 x ultrasonic sensors, 1 x line sensor) Video: E&L Elscan Outfeed conveyor for individual labels Doub ...
Manufacturer:Fujifilm Model: Acuity LED 1600 Year of Manufacture: 2017 Find more here - / Contact us at -
We are offering for sale the following Konica Minolta multifunction devices: - Konica Minolta C652 (2 devices) - Konica Minolta C284 - Meter Reading : 1152531 - Konica Minolta C224e (2 devices) - Meter Reading Machine 1 : 0985831 - Meter Reading Machine 2 : 0554450 Find more here - / Contact us at -
Manufacturer: Bobst Model: Flexo 200 Feeder type: Vacuum sheet feeder with pneumatic pressure plate Anilox rollers: All used, ceramic Printing units 1–4: 160 lines/cm, maximum feed volume 8.5 cm³/m² Printing unit 5: 100 lines/cm, maximum feed volume 10.5 cm³/m² Doctor blade system: Ceramic anilox rollers with metal doctor blade Vacuum sheet transport: Yes, 2007 vacuum transport (modified stainless steel suction plate) System upgrades: Sheet cleaning and warm air dryer, both Type 2 200 from DUO-TECHNIK; steam pressure reduction station from Helmut Herbert GmbH The running speed of the system is approximately 4,000 sheets per hour. Spare parts: ST= pieces Bezeichnung Lief.Artikelnr. Bestand BasisME Freilauf FK 24 AP BSA1101010400 2 ST Freilauf FB 44 SF BSA1101047600 2 ST Rutschnabe kplt. M. Kettenrad 16H7 Z20 RN 250M-1/KR 2 ST Reibscheibe RN 250/RS RN 250/RS 8 ST Tell ...
Manufacturer: Fujifilm Model:Acuity LED 1600 Year of Manufacture: 2016 Certifications: - ETL Intertek 3080219 - CE marked Conforms to UL STD 60950-1 - Certified to CAN/CSA STD C22.2 No.60950-1 Find more here - / Contact us at -
Prepress machine model CTP Type: Suprasetter A52/A75, GEN III Manufacturer: Heidelberg Year: 2011 Complete with RIP and decommissioning SW Number of exposed plates: 113,000 Number of exposed m2: 46,000 RIP: Metadimension 10.01 Decommissioning: Prinect Signa Station 10.02 The imaging unit is in excellent condition with regular service and a low number of exposed plates Find more here - / Contact us at -
Manufacturer: Agfa Model: Anapurna M3200i RTR Year of Manufacture: 2016 Machine type: UV inkjet printer Condition: used Colors: 6C- Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta Konica Minolta 1024i printheads Operating hours of UV lamps approx. 590h Total operating hours estimated: approx. 2500h Printing method: UV printing, roll to roll Print width: up to 3200 mm Find more here - / Contact us at -
offset printing machine Type: CX 102-5+L Manufacturer: Heidelberg Year: 2017 Impressions approx. 265.585.360 Printing Sheet Max. sheet format: 720 × 1,020 mm Min. sheet format: 340 × 480 mm Max. printed area: 710 × 1,020 mm Max. coated area: 710 × 1,020 mm Gripper margin width: 10 – 12 mm Printable materials: 0.03 – 1.0 mm AutoPlate Printing Plates Plate size (L × W): 790 × 1,030 mm Thickness: 0.2 – 0.3 mm Plate cylinder undercut: 0.12 mm Distance from plate edge to start of printing: 43 / 52 mm Offset Blankets Reinforced offset blanket Size: 840 × 1,052 mm Thickness: 1.95 mm Blanket cylinder undercut: 2.3 mm Packing: 735 × 1,030 mm Coating Plates Size (L × W): 780 × 1,030 mm Thickness: according to type 1.14 / 1.16 mm Distance from plate edge to start of coating: 43 mm Coating Blankets Reinforced coating blanket Size: 800 × 1,048 mm Thickne ...
Manufacturer: Roland Model: VS 640i Media Width: up to 160 cm The printhead was replaced a few years ago by a certified technician. The machine operates smoothly and reliably, with the cutting function fully functional. It has been used with VersaWorks software and received regular weekly maintenance. The ink cartridges currently installed in the machine are included; additional cartridges can be purchased separately. The latest nozzle test shows approximately 97% nozzle performance. Original instruction manual included. Find more here - / Contact us at -
